[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#422072: marked as done (installation-report: hw clock / cpufreq not working (Asus P5B-VM DO, Core 2 Duo E6600))



Your message dated Thu, 8 Oct 2009 14:19:31 +0200
with message-id <bb145bd20910080519l5c7c9ea2wa95c2e0a142939f@mail.gmail.com>
and subject line Re: installation-report: hw clock / cpufreq not working (Asus P5B-VM  DO, Core 2 Duo E6600)
has caused the Debian Bug report #422072,
regarding installation-report: hw clock / cpufreq not working (Asus P5B-VM DO, Core 2 Duo E6600)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
422072: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=422072
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Version: 2.29
Severity: normal


-- Package-specific info:

Boot method: CD
Image version: official etch i386 business card iso image
Date: 2007-05-03, 13:00 CEST

Machine:
Asus P5B-VM DO
Core 2 Duo E6600
2GB RAM
nVidia 8800 GTS
1 HD, 1 DVDRW (both on SATA-AHCI)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [E]
User/password setup:    [O]
Install tasks:          [ ]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

The machine's hw clock is set to local time (Europe/Vienna) because it
dual-boots XP. Thus I answered no to the 'clock set to UTC' question
and 'UTC=no' was duly written to /etc/default/rcS. However:

- during boot / shutdown hwclock times out: select() to /dev/rtc to
wait for clock tick time out.
- the system clock is two hours fast (i. e. it shows 15:00 when it is
really 13:00, leading to all manner of timestamp nastiness once
I'd corrected the time. After the first reboot the time was wrong
again, a third one (in single mode) had the correct one - maybe it's
random.

Additionally cpu frequency scaling doesn't work (already reported),
likely because of a BIOS/ACPI bug. Seeing as XP has no problems a
workaround may be possible but don't hold your breath.

Regards,

C.

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux chibi 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Q963/Q965 Memory Controller Hub [8086:2990] (rev 02)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation Q963/Q965 PCI Express Root Port [8086:2991] (rev 02)
lspci -nn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM Gigabit Network Connection [8086:104a] (rev 02)
lspci -nn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 [8086:2834] (rev 02)
lspci -nn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 [8086:2835] (rev 02)
lspci -nn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 [8086:283a] (rev 02)
lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 [8086:2830] (rev 02)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 [8086:2831] (rev 02)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 [8086:2832] (rev 02)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 [8086:2836] (rev 02)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller [8086:2814] (rev 02)
lspci -nn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) SATA AHCI Controller [8086:2821] (rev 02)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown device [10de:0193] (rev a2)
lspci -nn: 02:01.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation Q963/Q965 Memory Controller Hub [8086:2990] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81e9]
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Capabilities: [e0] Vendor Specific Information
lspci -vnn: 
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation Q963/Q965 PCI Express Root Port [8086:2991] (rev 02)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -vnn: 	I/O behind bridge: 0000e000-0000efff
lspci -vnn: 	Memory behind bridge: fa000000-feafffff
lspci -vnn: 	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
lspci -vnn: 	Capabilities: [88] Subsystem: Intel Corporation Unknown device [8086:0000]
lspci -vnn: 	Capabilities: [80] Power Management version 3
lspci -vnn: 	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: 	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
lspci -vnn: 
lspci -vnn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM Gigabit Network Connection [8086:104a] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8268]
lspci -vnn: 	Flags: bus master, fast devsel, latency 0, IRQ 50
lspci -vnn: 	Memory at f9fc0000 (32-bit, non-prefetchable) [size=128K]
lspci -vnn: 	Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: 	I/O ports at dc00 [size=32]
lspci -vnn: 	Capabilities: [c8] Power Management version 2
lspci -vnn: 	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
lspci -vnn: 
lspci -vnn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 [8086:2834] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: 	I/O ports at d800 [size=32]
lspci -vnn: 
lspci -vnn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 [8086:2835] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 193
lspci -vnn: 	I/O ports at d880 [size=32]
lspci -vnn: 
lspci -vnn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 [8086:283a] (rev 02) (prog-if 20)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: 	Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 	Capabilities: [58] Debug port
lspci -vnn: 
lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, fast devsel, latency 0, IRQ 14
lspci -vnn: 	Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: 	Capabilities: [70] Express Unknown type IRQ 0
lspci -vnn: 
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 [8086:2830] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 201
lspci -vnn: 	I/O ports at d080 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 [8086:2831] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -vnn: 	I/O ports at d400 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 [8086:2832] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: 	I/O ports at d480 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 [8086:2836] (rev 02) (prog-if 20)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 201
lspci -vnn: 	Memory at f9fff400 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 	Capabilities: [58] Debug port
lspci -vnn: 
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
lspci -vnn: 	Memory behind bridge: feb00000-febfffff
lspci -vnn: 	Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller [8086:2814] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0
lspci -vnn: 	Capabilities: [e0] Vendor Specific Information
lspci -vnn: 
lspci -vnn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) SATA AHCI Controller [8086:2821] (rev 02) (prog-if 01)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 225
lspci -vnn: 	I/O ports at cc00 [size=8]
lspci -vnn: 	I/O ports at c880 [size=4]
lspci -vnn: 	I/O ports at c800 [size=8]
lspci -vnn: 	I/O ports at c480 [size=4]
lspci -vnn: 	I/O ports at c400 [size=32]
lspci -vnn: 	Memory at f9ffc800 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+
lspci -vnn: 	Capabilities: [70] Power Management version 3
lspci -vnn: 	Capabilities: [a8] #12 [0010]
lspci -vnn: 
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81eb]
lspci -vnn: 	Flags: medium devsel, IRQ 10
lspci -vnn: 	Memory at f9fff000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	I/O ports at 0400 [size=32]
lspci -vnn: 
lspci -vnn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown device [10de:0193] (rev a2)
lspci -vnn: 	Subsystem: Unknown device [19f1:0416]
lspci -vnn: 	Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -vnn: 	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: 	Memory at e0000000 (64-bit, prefetchable) [size=256M]
lspci -vnn: 	Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
lspci -vnn: 	I/O ports at ec00 [size=128]
lspci -vnn: 	Expansion ROM at feae0000 [disabled] [size=128K]
lspci -vnn: 	Capabilities: [60] Power Management version 2
lspci -vnn: 	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: 	Capabilities: [78] Express Endpoint IRQ 0
lspci -vnn: 
lspci -vnn: 02:01.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
lspci -vnn: 	Subsystem: ASUSTeK Computer Inc. Unknown device [1043:808b]
lspci -vnn: 	Flags: bus master, medium devsel, latency 64, IRQ 233
lspci -vnn: 	Memory at febff800 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: 	Memory at febf8000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: 	Capabilities: [44] Power Management version 2
lspci -vnn: 
modulemap: 8086:104a e1000
modulemap: 8086:2834 uhci_hcd
modulemap: 8086:2835 uhci_hcd
modulemap: 8086:283a ehci_hcd
modulemap: 8086:2830 uhci_hcd
modulemap: 8086:2831 uhci_hcd
modulemap: 8086:2832 uhci_hcd
modulemap: 8086:2836 ehci_hcd
modulemap: 8086:2821 ahci
modulemap: 104c:8023 ohci1394
lsmod: Module                  Size  Used by
lsmod: qnx4                   10612  0 
lsmod: ntfs                  184084  0 
lsmod: xfs                   464756  0 
lsmod: reiserfs              210432  0 
lsmod: jfs                   156380  0 
lsmod: ext3                  116488  1 
lsmod: jbd                    47272  1 ext3
lsmod: vfat                   11392  0 
lsmod: fat                    45596  1 vfat
lsmod: e1000                 107072  0 
lsmod: eth1394                17540  0 
lsmod: nls_iso8859_1           4096  2 
lsmod: sbp2                   20232  0 
lsmod: isofs                  31544  0 
lsmod: ide_cd                 35360  0 
lsmod: ide_disk               14720  0 
lsmod: ide_generic             1280  0 [permanent]
lsmod: pdc202xx_new            7808  0 [permanent]
lsmod: aec62xx                 6656  0 [permanent]
lsmod: alim15x3               11020  0 [permanent]
lsmod: amd74xx                12956  0 [permanent]
lsmod: atiixp                  5776  0 [permanent]
lsmod: cmd64x                  9884  0 [permanent]
lsmod: cs5520                  4608  0 [permanent]
lsmod: cs5530                  4864  0 [permanent]
lsmod: cs5535                  4224  0 [permanent]
lsmod: cy82c693                4356  0 [permanent]
lsmod: generic                 5380  0 [permanent]
lsmod: hpt34x                  4992  0 [permanent]
lsmod: it821x                  7684  0 [permanent]
lsmod: jmicron                 4096  0 [permanent]
lsmod: ns87415                 4168  0 [permanent]
lsmod: opti621                 3972  0 [permanent]
lsmod: pdc202xx_old            9344  0 [permanent]
lsmod: piix                    9092  0 [permanent]
lsmod: rz1000                  2688  0 [permanent]
lsmod: sc1200                  6528  0 [permanent]
lsmod: serverworks             8328  0 [permanent]
lsmod: siimage                10880  0 [permanent]
lsmod: sis5513                12296  0 [permanent]
lsmod: slc90e66                4992  0 [permanent]
lsmod: triflex                 3712  0 [permanent]
lsmod: trm290                  3972  0 [permanent]
lsmod: via82cxxx               8324  0 [permanent]
lsmod: usb_storage            70848  0 
lsmod: ide_core              107248  31 ide_cd,ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,generic,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage
lsmod: vga16fb                11148  2 
lsmod: vgastate                7680  1 vga16fb
lsmod: usbserial              28136  0 
lsmod: usbkbd                  6656  0 
lsmod: thermal                13320  0 
lsmod: processor              23212  1 thermal
lsmod: fan                     4740  0 
lsmod: sg                     30108  0 
lsmod: sr_mod                 15652  0 
lsmod: cdrom                  32160  2 ide_cd,sr_mod
lsmod: sd_mod                 18832  3 
lsmod: usbhid                 35552  0 
lsmod: parport_pc             31268  0 
lsmod: parport                31816  1 parport_pc
lsmod: floppy                 51748  0 
lsmod: ohci1394               29744  0 
lsmod: ieee1394               84408  3 eth1394,sbp2,ohci1394
lsmod: ehci_hcd               26888  0 
lsmod: ahci                   17540  2 
lsmod: libata                 87316  1 ahci
lsmod: scsi_mod              121352  7 sbp2,usb_storage,sg,sr_mod,sd_mod,ahci,libata
lsmod: uhci_hcd               19980  0 
lsmod: usbcore               108676  7 usb_storage,usbserial,usbkbd,usbhid,ehci_hcd,uhci_hcd
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                   453392       432    452960   0% /dev
df: tmpfs                   453392       432    452960   0% /dev
df: tmpfs                   453392       432    452960   0% /.dev
df: /dev/scsi/host2/bus0/target0/lun0/part8  18674480    468576  17257268   3% /target
free:               total         used         free       shared      buffers
free:   Mem:       906788       400256       506532            0        26892
free:  Swap:      2000020            0      2000020
free: Total:      2906808       400256      2506552
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor	: 0
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 15
/proc/cpuinfo: model name	: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz
/proc/cpuinfo: stepping	: 6
/proc/cpuinfo: cpu MHz		: 2394.072
/proc/cpuinfo: cache size	: 4096 KB
/proc/cpuinfo: fdiv_bug	: no
/proc/cpuinfo: hlt_bug		: no
/proc/cpuinfo: f00f_bug	: no
/proc/cpuinfo: coma_bug	: no
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 10
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips	: 4791.09
/proc/cpuinfo: 
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0290-0297 : pnp 00:08
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-041f : 0000:00:1f.3
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK
/proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK
/proc/ioports: 0808-080b : ACPI PM_TMR
/proc/ioports: 0810-0815 : ACPI CPU throttle
/proc/ioports: 0828-082f : ACPI GPE0_BLK
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: c400-c41f : 0000:00:1f.2
/proc/ioports:   c400-c41f : ahci
/proc/ioports: c480-c483 : 0000:00:1f.2
/proc/ioports:   c480-c483 : ahci
/proc/ioports: c800-c807 : 0000:00:1f.2
/proc/ioports:   c800-c807 : ahci
/proc/ioports: c880-c883 : 0000:00:1f.2
/proc/ioports:   c880-c883 : ahci
/proc/ioports: cc00-cc07 : 0000:00:1f.2
/proc/ioports:   cc00-cc07 : ahci
/proc/ioports: d080-d09f : 0000:00:1d.0
/proc/ioports:   d080-d09f : uhci_hcd
/proc/ioports: d400-d41f : 0000:00:1d.1
/proc/ioports:   d400-d41f : uhci_hcd
/proc/ioports: d480-d49f : 0000:00:1d.2
/proc/ioports:   d480-d49f : uhci_hcd
/proc/ioports: d800-d81f : 0000:00:1a.0
/proc/ioports:   d800-d81f : uhci_hcd
/proc/ioports: d880-d89f : 0000:00:1a.1
/proc/ioports:   d880-d89f : uhci_hcd
/proc/ioports: dc00-dc1f : 0000:00:19.0
/proc/ioports:   dc00-dc1f : e1000
/proc/ioports: e000-efff : PCI Bus #01
/proc/ioports:   ec00-ec7f : 0000:01:00.0
/proc/iomem: 00000000-0009ebff : System RAM
/proc/iomem:   00000000-00000000 : Crash kernel
/proc/iomem: 0009ec00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cc5ff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7ef8ffff : System RAM
/proc/iomem:   00100000-00277829 : Kernel code
/proc/iomem:   0027782a-0030dc73 : Kernel data
/proc/iomem: 7ef90000-7ef9dfff : ACPI Tables
/proc/iomem: 7ef9e000-7efdffff : ACPI Non-volatile Storage
/proc/iomem: 7efe0000-7effffff : reserved
/proc/iomem: e0000000-efffffff : PCI Bus #01
/proc/iomem:   e0000000-efffffff : 0000:01:00.0
/proc/iomem: f9fc0000-f9fdffff : 0000:00:19.0
/proc/iomem:   f9fc0000-f9fdffff : e1000
/proc/iomem: f9ff4000-f9ff7fff : 0000:00:1b.0
/proc/iomem: f9ffc800-f9ffcfff : 0000:00:1f.2
/proc/iomem:   f9ffc800-f9ffcfff : ahci
/proc/iomem: f9ffe000-f9ffefff : 0000:00:19.0
/proc/iomem:   f9ffe000-f9ffefff : e1000
/proc/iomem: f9fff000-f9fff0ff : 0000:00:1f.3
/proc/iomem: f9fff400-f9fff7ff : 0000:00:1d.7
/proc/iomem:   f9fff400-f9fff7ff : ehci_hcd
/proc/iomem: f9fff800-f9fffbff : 0000:00:1a.7
/proc/iomem:   f9fff800-f9fffbff : ehci_hcd
/proc/iomem: fa000000-feafffff : PCI Bus #01
/proc/iomem:   fa000000-fbffffff : 0000:01:00.0
/proc/iomem:   fd000000-fdffffff : 0000:01:00.0
/proc/iomem:   feae0000-feafffff : 0000:01:00.0
/proc/iomem: feb00000-febfffff : PCI Bus #02
/proc/iomem:   febf8000-febfbfff : 0000:02:01.0
/proc/iomem:   febff800-febfffff : 0000:02:01.0
/proc/iomem:     febff800-febfffff : ohci1394
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ffe00000-ffffffff : reserved
/proc/interrupts:            CPU0       
/proc/interrupts:   0:     199016    IO-APIC-edge  timer
/proc/interrupts:   6:          8    IO-APIC-edge  floppy
/proc/interrupts:   7:          0    IO-APIC-edge  parport0
/proc/interrupts:   9:          0   IO-APIC-level  acpi
/proc/interrupts:  50:      93951         PCI-MSI  eth1
/proc/interrupts: 169:          0   IO-APIC-level  uhci_hcd:usb1
/proc/interrupts: 193:          0   IO-APIC-level  uhci_hcd:usb2
/proc/interrupts: 201:        577   IO-APIC-level  uhci_hcd:usb3, ehci_hcd:usb7
/proc/interrupts: 209:          0   IO-APIC-level  uhci_hcd:usb4
/proc/interrupts: 217:          0   IO-APIC-level  uhci_hcd:usb5, ehci_hcd:usb6
/proc/interrupts: 225:      22379         PCI-MSI  libata
/proc/interrupts: 233:          3   IO-APIC-level  ohci1394
/proc/interrupts: NMI:          0 
/proc/interrupts: LOC:     197298 
/proc/interrupts: ERR:          0
/proc/interrupts: MIS:          0
/proc/meminfo: MemTotal:       906788 kB
/proc/meminfo: MemFree:        506332 kB
/proc/meminfo: Buffers:         26892 kB
/proc/meminfo: Cached:         318712 kB
/proc/meminfo: SwapCached:          0 kB
/proc/meminfo: Active:         224640 kB
/proc/meminfo: Inactive:       137076 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:       906788 kB
/proc/meminfo: LowFree:        506332 kB
/proc/meminfo: SwapTotal:     2000020 kB
/proc/meminfo: SwapFree:      2000020 kB
/proc/meminfo: Dirty:            1768 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: AnonPages:       16152 kB
/proc/meminfo: Mapped:           1796 kB
/proc/meminfo: Slab:            26956 kB
/proc/meminfo: PageTables:        232 kB
/proc/meminfo: NFS_Unstable:        0 kB
/proc/meminfo: Bounce:              0 kB
/proc/meminfo: CommitLimit:   2453412 kB
/proc/meminfo: Committed_AS:    20088 kB
/proc/meminfo: VmallocTotal:   122576 kB
/proc/meminfo: VmallocUsed:      9088 kB
/proc/meminfo: VmallocChunk:   112424 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=045e Product=0040 Version=0300
/proc/bus/input/devices: N: Name="Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=mouse0 
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices: 
/proc/bus/input/devices: I: Bus=0003 Vendor=046a Product=0001 Version=0026
/proc/bus/input/devices: N: Name="Cherry GmbH"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-2/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input3
/proc/bus/input/devices: H: Handlers=kbd 
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=7 ff800000 7ff e0b2ffdf 1cfffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices: 
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.4 present.
dmidecode: 75 structures occupying 2382 bytes.
dmidecode: Table at 0x000F06C0.
dmidecode: 
dmidecode: Handle 0x0000, DMI type 0, 24 bytes
dmidecode: BIOS Information
dmidecode: 	Vendor: American Megatrends Inc.
dmidecode: 	Version: 0613    
dmidecode: 	Release Date: 04/02/2007
dmidecode: 	Address: 0xF0000
dmidecode: 	Runtime Size: 64 kB
dmidecode: 	ROM Size: 2048 kB
dmidecode: 	Characteristics:
dmidecode: 		ISA is supported
dmidecode: 		PCI is supported
dmidecode: 		PNP is supported
dmidecode: 		APM is supported
dmidecode: 		BIOS is upgradeable
dmidecode: 		BIOS shadowing is allowed
dmidecode: 		ESCD support is available
dmidecode: 		Boot from CD is supported
dmidecode: 		Selectable boot is supported
dmidecode: 		BIOS ROM is socketed
dmidecode: 		EDD is supported
dmidecode: 		5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 		3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 		3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: 		Print screen service is supported (int 5h)
dmidecode: 		8042 keyboard services are supported (int 9h)
dmidecode: 		Serial services are supported (int 14h)
dmidecode: 		Printer services are supported (int 17h)
dmidecode: 		CGA/mono video services are supported (int 10h)
dmidecode: 		ACPI is supported
dmidecode: 		USB legacy is supported
dmidecode: 		AGP is supported
dmidecode: 		LS-120 boot is supported
dmidecode: 		ATAPI Zip drive boot is supported
dmidecode: 		BIOS boot specification is supported
dmidecode: 		Targeted content distribution is supported
dmidecode: 	BIOS Revision: 6.13
dmidecode: 
dmidecode: Handle 0x0001, DMI type 1, 27 bytes
dmidecode: System Information
dmidecode: 	Manufacturer: System manufacturer
dmidecode: 	Product Name: System Product Name
dmidecode: 	Version: System Version
dmidecode: 	Serial Number: System Serial Number
dmidecode: 	UUID: 607B8808-7893-DB11-9B4D-001A9223E9FE
dmidecode: 	Wake-up Type: Power Switch
dmidecode: 	SKU Number: To Be Filled By O.E.M.
dmidecode: 	Family: To Be Filled By O.E.M.
dmidecode: 
dmidecode: Handle 0x0002, DMI type 2, 15 bytes
dmidecode: Base Board Information
dmidecode: 	Manufacturer: ASUSTeK Computer INC.
dmidecode: 	Product Name: P5B-VM DO
dmidecode: 	Version: Rev 1.xx
dmidecode: 	Serial Number: MB-1234567890
dmidecode: 	Asset Tag: To Be Filled By O.E.M.
dmidecode: 	Features:
dmidecode: 		Board is a hosting board
dmidecode: 		Board is replaceable
dmidecode: 	Location In Chassis: To Be Filled By O.E.M.
dmidecode: 	Chassis Handle: 0x0003
dmidecode: 	Type: Motherboard
dmidecode: 	Contained Object Handles: 0
dmidecode: 
dmidecode: Handle 0x0003, DMI type 3, 21 bytes
dmidecode: Chassis Information
dmidecode: 	Manufacturer: Chassis Manufacture
dmidecode: 	Type: Desktop
dmidecode: 	Lock: Not Present
dmidecode: 	Version: Chassis Version
dmidecode: 	Serial Number: Chassis Serial Number
dmidecode: 	Asset Tag: Asset-1234567890
dmidecode: 	Boot-up State: Safe
dmidecode: 	Power Supply State: Safe
dmidecode: 	Thermal State: Safe
dmidecode: 	Security Status: None
dmidecode: 	OEM Information: 0x00000001
dmidecode: 	Heigth: Unspecified
dmidecode: 	Number Of Power Cords: 1
dmidecode: 	Contained Elements: 0
dmidecode: 
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: 	Socket Designation: LGA 775
dmidecode: 	Type: Central Processor
dmidecode: 	Family: Pentium 4
dmidecode: 	Manufacturer: Intel            
dmidecode: 	ID: F6 06 00 00 FF FB EB BF
dmidecode: 	Signature: Type 0, Family 6, Model 15, Stepping 6
dmidecode: 	Flags:
dmidecode: 		FPU (Floating-point unit on-chip)
dmidecode: 		VME (Virtual mode extension)
dmidecode: 		DE (Debugging extension)
dmidecode: 		PSE (Page size extension)
dmidecode: 		TSC (Time stamp counter)
dmidecode: 		MSR (Model specific registers)
dmidecode: 		PAE (Physical address extension)
dmidecode: 		MCE (Machine check exception)
dmidecode: 		CX8 (CMPXCHG8 instruction supported)
dmidecode: 		APIC (On-chip APIC hardware supported)
dmidecode: 		SEP (Fast system call)
dmidecode: 		MTRR (Memory type range registers)
dmidecode: 		PGE (Page global enable)
dmidecode: 		MCA (Machine check architecture)
dmidecode: 		CMOV (Conditional move instruction supported)
dmidecode: 		PAT (Page attribute table)
dmidecode: 		PSE-36 (36-bit page size extension)
dmidecode: 		CLFSH (CLFLUSH instruction supported)
dmidecode: 		DS (Debug store)
dmidecode: 		ACPI (ACPI supported)
dmidecode: 		MMX (MMX technology supported)
dmidecode: 		FXSR (Fast floating-point save and restore)
dmidecode: 		SSE (Streaming SIMD extensions)
dmidecode: 		SSE2 (Streaming SIMD extensions 2)
dmidecode: 		SS (Self-snoop)
dmidecode: 		HTT (Hyper-threading technology)
dmidecode: 		TM (Thermal monitor supported)
dmidecode: 		PBE (Pending break enabled)
dmidecode: 	Version: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz               
dmidecode: 	Voltage: 1.3 V
dmidecode: 	External Clock: 266 MHz
dmidecode: 	Max Speed: 4400 MHz
dmidecode: 	Current Speed: 2394 MHz
dmidecode: 	Status: Populated, Enabled
dmidecode: 	Upgrade: Other
dmidecode: 	L1 Cache Handle: 0x0005
dmidecode: 	L2 Cache Handle: 0x0006
dmidecode: 	L3 Cache Handle: 0x0007
dmidecode: 	Serial Number: To Be Filled By O.E.M.
dmidecode: 	Asset Tag: To Be Filled By O.E.M.
dmidecode: 	Part Number: To Be Filled By O.E.M.
dmidecode: 
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: L1-Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 1
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 32 KB
dmidecode: 	Maximum Size: 32 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Other
dmidecode: 	Installed SRAM Type: Other
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Parity
dmidecode: 	System Type: Data
dmidecode: 	Associativity: 8-way Set-associative
dmidecode: 
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: L2-Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 2
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 4096 KB
dmidecode: 	Maximum Size: 4096 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Other
dmidecode: 	Installed SRAM Type: Other
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Single-bit ECC
dmidecode: 	System Type: Instruction
dmidecode: 	Associativity: 8-way Set-associative
dmidecode: 
dmidecode: Handle 0x0007, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: L3-Cache
dmidecode: 	Configuration: Disabled, Not Socketed, Level 3
dmidecode: 	Operational Mode: Unknown
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 0 KB
dmidecode: 	Maximum Size: 0 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Unknown
dmidecode: 	Installed SRAM Type: Unknown
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Unknown
dmidecode: 	System Type: Unknown
dmidecode: 	Associativity: Unknown
dmidecode: 
dmidecode: Handle 0x0008, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: 	Error Detecting Method: 64-bit ECC
dmidecode: 	Error Correcting Capabilities:
dmidecode: 		None
dmidecode: 	Supported Interleave: One-way Interleave
dmidecode: 	Current Interleave: One-way Interleave
dmidecode: 	Maximum Memory Module Size: 8192 MB
dmidecode: 	Maximum Total Memory Size: 32768 MB
dmidecode: 	Supported Speeds:
dmidecode: 		70 ns
dmidecode: 		60 ns
dmidecode: 		50 ns
dmidecode: 	Supported Memory Types:
dmidecode: 		SIMM
dmidecode: 		DIMM
dmidecode: 	Memory Module Voltage: 3.3 V
dmidecode: 	Associated Memory Slots: 4
dmidecode: 		0x0009
dmidecode: 		0x000A
dmidecode: 		0x000B
dmidecode: 		0x000C
dmidecode: 	Enabled Error Correcting Capabilities:
dmidecode: 		None
dmidecode: 
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM0
dmidecode: 	Bank Connections: 0 1
dmidecode: 	Current Speed: 25 ns
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: 1024 MB (Double-bank Connection)
dmidecode: 	Enabled Size: 1024 MB (Double-bank Connection)
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM1
dmidecode: 	Bank Connections: 2 3
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: Not Installed
dmidecode: 	Enabled Size: Not Installed
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x000B, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM2
dmidecode: 	Bank Connections: 4 5
dmidecode: 	Current Speed: 25 ns
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: 1024 MB (Double-bank Connection)
dmidecode: 	Enabled Size: 1024 MB (Double-bank Connection)
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x000C, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM3
dmidecode: 	Bank Connections: 6 7
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: Not Installed
dmidecode: 	Enabled Size: Not Installed
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: PS/2 Mouse
dmidecode: 	External Connector Type: PS/2
dmidecode: 	Port Type: Mouse Port
dmidecode: 
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: PS/2 Keyboard
dmidecode: 	External Connector Type: PS/2
dmidecode: 	Port Type: Keyboard Port
dmidecode: 
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB1
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB2
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB3
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB4
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB5
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB6
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB7
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB8
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB9
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: USB10
dmidecode: 	External Connector Type: Access Bus (USB)
dmidecode: 	Port Type: USB
dmidecode: 
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: LPT 1
dmidecode: 	External Connector Type: DB-25 male
dmidecode: 	Port Type: Parallel Port ECP/EPP
dmidecode: 
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: COM 1
dmidecode: 	External Connector Type: DB-9 male
dmidecode: 	Port Type: Serial Port 16550A Compatible
dmidecode: 
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Audio Line Out1
dmidecode: 	External Connector Type: Mini Jack (headphones)
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Audio Line Out2
dmidecode: 	External Connector Type: Mini Jack (headphones)
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Audio Line Out3
dmidecode: 	External Connector Type: Mini Jack (headphones)
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Audio Line Out4
dmidecode: 	External Connector Type: Mini Jack (headphones)
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Audio Line Out5
dmidecode: 	External Connector Type: Mini Jack (headphones)
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: Audio Line Out6
dmidecode: 	External Connector Type: Mini Jack (headphones)
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: GbE LAN 1
dmidecode: 	External Connector Type: RJ-45
dmidecode: 	Port Type: Network Port
dmidecode: 
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: FireWire 1
dmidecode: 	External Connector Type: IEEE 1394
dmidecode: 	Port Type: Firewire (IEEE P1394)
dmidecode: 
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: FireWire 2
dmidecode: 	External Connector Type: IEEE 1394
dmidecode: 	Port Type: Firewire (IEEE P1394)
dmidecode: 
dmidecode: Handle 0x0024, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: Not Specified
dmidecode: 	Internal Connector Type: None
dmidecode: 	External Reference Designator: SPDIF_OUT1
dmidecode: 	External Connector Type: On Board Sound Input From CD-ROM
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x0025, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: SB_SATA1
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0026, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: SB_SATA2
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0027, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: SB_SATA3
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0028, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: SB_SATA4
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0029, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: SB_SATA5
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x002A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: SB_SATA6
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x002B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: JMicron_SATA1
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x002C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: JMicron_SATA2
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x002D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: JMicron_IDE
dmidecode: 	Internal Connector Type: On Board IDE
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x002E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: CHA_FAN1
dmidecode: 	Internal Connector Type: Other
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x002F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: CHA_FAN2
dmidecode: 	Internal Connector Type: Other
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0030, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: CD
dmidecode: 	Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x0031, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: FLOPPY
dmidecode: 	Internal Connector Type: On Board Floppy
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0032, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: CPU_FAN
dmidecode: 	Internal Connector Type: Other
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0033, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: PWR_FAN
dmidecode: 	Internal Connector Type: Other
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0034, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: FP_AUDIO
dmidecode: 	Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Audio Port
dmidecode: 
dmidecode: Handle 0x0035, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: TPM_SLOT
dmidecode: 	Internal Connector Type: Other
dmidecode: 	External Reference Designator: Not Specified
dmidecode: 	External Connector Type: None
dmidecode: 	Port Type: Other
dmidecode: 
dmidecode: Handle 0x0036, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCIEX16
dmidecode: 	Type: 32-bit PCI-X
dmidecode: 	Current Usage: In Use
dmidecode: 	Length: Short
dmidecode: 	ID: 0
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0037, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI_1
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Short
dmidecode: 	ID: 1
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0038, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI_2
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Short
dmidecode: 	ID: 2
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0039, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCIEX4
dmidecode: 	Type: 32-bit PCI-X
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Short
dmidecode: 	ID: 3
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x003A, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: 	Type: Ethernet
dmidecode: 	Status: Enabled
dmidecode: 	Description:  Onboard Ethernet
dmidecode: 
dmidecode: Handle 0x003B, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: 	String 1: To Be Filled By O.E.M.
dmidecode: 	String 2: To Be Filled By O.E.M.
dmidecode: 	String 3: To Be Filled By O.E.M.
dmidecode: 	String 4: To Be Filled By O.E.M.
dmidecode: 
dmidecode: Handle 0x003C, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: 	Installable Languages: 1
dmidecode: 		en|US|iso8859-1
dmidecode: 	Currently Installed Language: en|US|iso8859-1
dmidecode: 
dmidecode: Handle 0x003D, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: 	Location: System Board Or Motherboard
dmidecode: 	Use: System Memory
dmidecode: 	Error Correction Type: None
dmidecode: 	Maximum Capacity: 4 GB
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Number Of Devices: 4
dmidecode: 
dmidecode: Handle 0x003E, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x0007FFFFFFF
dmidecode: 	Range Size: 2 GB
dmidecode: 	Physical Array Handle: 0x003D
dmidecode: 	Partition Width: 0
dmidecode: 
dmidecode: Handle 0x003F, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x003D
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: 64 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: 1024 MB
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM0
dmidecode: 	Bank Locator: BANK0
dmidecode: 	Type: SDRAM
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: 800 MHz (1.2 ns)
dmidecode: 	Manufacturer: Manufacturer0
dmidecode: 	Serial Number: SerNum0
dmidecode: 	Asset Tag: AssetTagNum0
dmidecode: 	Part Number: PartNum0
dmidecode: 
dmidecode: Handle 0x0040, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x0003FFFFFFF
dmidecode: 	Range Size: 1 GB
dmidecode: 	Physical Device Handle: 0x003F
dmidecode: 	Memory Array Mapped Address Handle: 0x003E
dmidecode: 	Partition Row Position: 1
dmidecode: 
dmidecode: Handle 0x0041, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x003D
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: Unknown
dmidecode: 	Data Width: Unknown
dmidecode: 	Size: No Module Installed
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM1
dmidecode: 	Bank Locator: BANK1
dmidecode: 	Type: Unknown
dmidecode: 	Type Detail: Unknown
dmidecode: 	Speed: Unknown
dmidecode: 	Manufacturer: Manufacturer1
dmidecode: 	Serial Number: SerNum1
dmidecode: 	Asset Tag: AssetTagNum1
dmidecode: 	Part Number: PartNum1
dmidecode: 
dmidecode: Handle 0x0042, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x000000003FF
dmidecode: 	Range Size: 1 kB
dmidecode: 	Physical Device Handle: 0x0041
dmidecode: 	Memory Array Mapped Address Handle: 0x003E
dmidecode: 	Partition Row Position: 1
dmidecode: 
dmidecode: Handle 0x0043, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x003D
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: 64 bits
dmidecode: 	Data Width: 64 bits
dmidecode: 	Size: 1024 MB
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM2
dmidecode: 	Bank Locator: BANK2
dmidecode: 	Type: SDRAM
dmidecode: 	Type Detail: Synchronous
dmidecode: 	Speed: 800 MHz (1.2 ns)
dmidecode: 	Manufacturer: Manufacturer2
dmidecode: 	Serial Number: SerNum2
dmidecode: 	Asset Tag: AssetTagNum2
dmidecode: 	Part Number: PartNum2
dmidecode: 
dmidecode: Handle 0x0044, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00044000000
dmidecode: 	Ending Address: 0x00083FFFFFF
dmidecode: 	Range Size: 1 GB
dmidecode: 	Physical Device Handle: 0x0043
dmidecode: 	Memory Array Mapped Address Handle: 0x003E
dmidecode: 	Partition Row Position: 1
dmidecode: 
dmidecode: Handle 0x0045, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: 	Array Handle: 0x003D
dmidecode: 	Error Information Handle: Not Provided
dmidecode: 	Total Width: Unknown
dmidecode: 	Data Width: Unknown
dmidecode: 	Size: No Module Installed
dmidecode: 	Form Factor: DIMM
dmidecode: 	Set: None
dmidecode: 	Locator: DIMM3
dmidecode: 	Bank Locator: BANK3
dmidecode: 	Type: Unknown
dmidecode: 	Type Detail: Unknown
dmidecode: 	Speed: Unknown
dmidecode: 	Manufacturer: Manufacturer3
dmidecode: 	Serial Number: SerNum3
dmidecode: 	Asset Tag: AssetTagNum3
dmidecode: 	Part Number: PartNum3
dmidecode: 
dmidecode: Handle 0x0046, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: 	Starting Address: 0x00000000000
dmidecode: 	Ending Address: 0x000000003FF
dmidecode: 	Range Size: 1 kB
dmidecode: 	Physical Device Handle: 0x0045
dmidecode: 	Memory Array Mapped Address Handle: 0x003E
dmidecode: 	Partition Row Position: 1
dmidecode: 
dmidecode: Handle 0x0047, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: 	Status: No errors detected
dmidecode: 
dmidecode: Handle 0x0048, DMI type 129, 8 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		81 08 48 00 01 01 02 01
dmidecode: 	Strings:
dmidecode: 		Intel_ASF
dmidecode: 		Intel ASF_001
dmidecode: 
dmidecode: Handle 0x0049, DMI type 130, 20 bytes
dmidecode: OEM-specific Type
dmidecode: 	Header and Data:
dmidecode: 		82 14 49 00 24 41 4D 54 01 00 00 01 01 00 00 00
dmidecode: 		00 00 00 00
dmidecode: 
dmidecode: Handle 0x004A, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode: 

==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support

Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers

Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb

Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940

Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM

Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support

Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers

Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers

Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules

Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support

Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support

Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers

Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon

Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers

Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers

Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16

Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System

Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules

Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file

Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver

Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers

Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy

Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector

Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer

Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support

Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions

Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables

Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules

Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support

Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem

Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13

Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers

Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20070308
Description: debian installation image

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23

Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.15
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
 This package contains CRC support modules.

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
 dhcp-client-udeb is a minimal dhcp package used by the debian-installer.

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
 This package contains EFI modules.

Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76

Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
 fdisk package

Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-2
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC2440.
 .
 This is GnuPG's signature verification tool, gpgv, packaged in minimal
 form for use in debian-installer.

Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73

Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
 This package contains the JFS filesystem module for the Linux kernel.

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's).
 See RFC 4122 for more information.
 .
 This is a minimal package for debian-installer.

Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75

Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
 This package contains loopback filesystem support for the Linux kernel.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
 This package contains RAID and LVM modules for the Linux kernel.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 arrays (e.g. software RAID, multipath devices).
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
 This package contains rare NIC drivers for the Linux kernel.

Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
 This package contains common NIC drivers for the Linux kernel.

Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
 This package contains common PCMCIA NIC drivers for the Linux kernel.

Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
 This package contains NIC drivers needed by combinations of nic-modules,
 nic-extra-modules, and nic-pcmcia-modules.

Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
 This package contains USB network adapter drivers for the Linux kernel.

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
 Currently this udeb contains only ntfsresize.

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)

Package: pkgsel
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.

Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
 This package contains uncommon SCSI drivers for the Linux kernel.
 This includes SCSI RAID drivers, and some of the less common SCSI
 controllers.

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate the Linux
 Wireless Extensions. The Wireless Extension is an interface allowing you to
 set Wireless LAN specific parameters and get the specific stats.
 .
 This is a udeb of the wireless tools.

Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
 This package contains the XFS filesystem module for the Linux kernel.

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This minimal package includes the shared library
 for use with the Debian installer.

Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
 This package contains the NTFS file system module for the Linux kernel.

Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
 This package contains the QNX4 filesystem module for the Linux kernel.


-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)

installation-report depends on no packages.

Versions of packages installation-report recommends:
pn  pciutils                      <none>     (no description available)
ii  reportbug                     3.31       reports bugs in the Debian distrib

-- no debconf information


--- End Message ---
--- Begin Message ---
I don't have that board anymore, closing.

Thanks,

C.


--- End Message ---

Reply to: