Bug#513565: post install bugs
Package: installation-reports
Boot method: network
Image version:
http://cdimage.debian.org/cdimage/lenny_di_rc1/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 26th Jan 2009
Machine: Thinkpad T40, T42, T43
Processor: Intel Pentium M
Memory:1GB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda2 ext3 6728312 3561008 2825524 56% /
tmpfs tmpfs 513436 0 513436 0% /lib/init/rw
udev tmpfs 10240 92 10148 1% /dev
tmpfs tmpfs 513436 0 513436 0% /dev/shm
/dev/sda6 ext3 29459020 8003456 19959112 29% /home
Output of lspci -knn:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 03)
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 [8086:2660] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 3 [8086:2664] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e]
(rev 03)
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) AC'97 Modem Controller [8086:266d] (rev 03)
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC
Interface Bridge [8086:2641] (rev 03)
Kernel modules: iTCO_wdt, intel-rng
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 03)
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) SMBus Controller [8086:266a] (rev 03)
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11)
Kernel driver in use: tg3
Kernel modules: tg3
04:00.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus
Controller [104c:ac56]
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
04:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
[Calexico2] Network Connection [8086:4220] (rev 05)
Kernel driver in use: ipw2200
Kernel modules: ipw2200
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
When asked to load IPW2200 firmware from USB stick, clicked OK,
scanned the hard disk for around 10 minutes, did not find the USB stick.
After install these keys have been mapped incorrectly:
Shift+2, should be @ symbol but gave " which is actually Shift+' key
Shift+£ should be # symbol but is now on the fwd slash key (3rd right
of P key).
Hash symbol is on Shift + fwd slash key.
~ key outputs ¬
Shift+
maybe more ??
Reply to: