Bug#498710: lenny install created etch sources.list
X-Debbugs-CC: qjb@debian.org
Package: installation-reports
Boot method: grub, hard drive
Image version: lenny daily image, vmlinuz, gtk/initrd.gz from "other
images", 2008-09-06
14c952393386b41fd358b343267a3007 vmlinuz
5d476f9962126e3f8530fe374a49880c gtk-initrd.gz
Date: September 6, 2008
Machine: Dell Latitude D810
Processor: Pentium M, 2 GHz
Memory: 1 GB
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg1-lenny--root
xfs 6281216 4800960 1480256 77% /
tmpfs tmpfs 517972 0 517972 0% /lib/init/rw
udev tmpfs 10240 96 10144 1% /dev
tmpfs tmpfs 517972 0 517972 0% /dev/shm
/dev/sda2 ext3 46665 21168 23088 48% /boot
/dev/mapper/vg1-home
xfs 15718400 14671360 1047040 94% /home
/dev/mapper/vg1-u1
xfs 1038336 4428 1033908 1% /u1
---------
Disk /dev/sda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
/dev/sda1 1 7 56196 6 FAT16
/dev/sda2 * 8 13 48195 83 Linux
/dev/sda3 14 1473 11727450 7 HPFS/NTFS
/dev/sda4 1474 7296 46773247+ 8e Linux LVM
---------
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
etch-root vg1 -wi-a- 6.00G
home vg1 -wi-ao 15.00G
lenny-root vg1 -wi-ao 6.00G
swap vg1 -wi-ao 2.00G
u1 vg1 -wi-ao 1.00G
---------
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03)
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03)
Kernel driver in use: ata_piix
Kernel modules: ahci, ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M22 [Mobility Radeon X300] [1002:5460]
Kernel modules: radeonfb
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Kernel driver in use: tg3
Kernel modules: tg3
03:01.0 CardBus bridge [0607]: Texas Instruments PCI6515 Cardbus Controller [104c:8036]
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
03:01.5 Communication controller [0780]: Texas Instruments PCI6515 SmartCard Controller [104c:8038]
03:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG Network Connection [8086:4223] (rev 05)
Kernel driver in use: ipw2200
Kernel modules: ipw2200
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [E]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
I have a local debian mirror. When I configured apt, I selected it
from the installation menu. The resulting /etc/apt/sources.list file
was configured for etch even though I used the lenny installer image.
I didn't investigate whether this was related to my having chosen a
local mirror, though my mirror has etch, lenny, and sid on it. As a
result, the first attempt to install, when I ran tasksel from the
installer, installed a mixture of etch and lenny packages, and an
aptitude full-upgrade ran into some trouble. On my second
installation attempt, I installed the base system only. Then, once I
booted, I edited my sources.list to point to lenny instead of etch,
ran aptitude full-upgrade, and then ran tasksel manually. That
resulted in a fully working system.
--
Jay Berkenbilt <qjb@debian.org>
Reply to: