--- Begin Message ---
Package: installation-reports
Version: 2.28
Severity: wishlist
-- Package-specific info:
Boot method: CD
Image version: testing, dvd-image, i386, 20060821, from debian ftp server
Date: 2006-11-29
Machine: HP Compaq NX7400 (RH387EA)
Partitions: <df -Tl will do; the raw partition table is preferred>
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 2996 24065338+ 7 HPFS/NTFS
/dev/sda2 2997 9729 54082822+ 5 Extended
/dev/sda5 2997 3091 763056 82 Linux swap / Solaris
/dev/sda6 3092 8190 40957686 83 Linux
/dev/sda7 8191 9538 10827778+ 83 Linux
/dev/sda8 9539 9729 1534176 b W95 FAT32
FAT32 is NOT used as ntfs-3g works.
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
HDD: GTK installer didn't work (failed to recognize hdd), however
this seems to be a problem with my image, as it also failed on an
other machine. Text based install worked very well.
NETWORKCARD: Internal Broadcom BCM4311 (PCIe) WLAN didn't work as the
kerneldriver for this card was not ready at the time of the install.
Now there is a patch that makes it work (probably included in 2.6.21)
However the ndiswrapper solution seems more reliable.
A pcmcia PRISM2 WLAN card worked out of the box.
The BCM4401 also works out of the box.
A detailed description of the installation is available at
http://r2d2.stefanm.com/nx7400.html
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060806)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux nx7400 2.6.16-2-486 #1 Sat Jul 15 21:23:01 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub
lspci -v -t: +-02.0 Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
lspci -v -t: +-02.1 Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
lspci -v -t: +-1b.0 Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller
lspci -v -t: +-1c.0-[0000:08]--
lspci -v -t: +-1c.1-[0000:10]----00.0 Broadcom Corporation Unknown device 4311
lspci -v -t: +-1c.3-[0000:20]--
lspci -v -t: +-1d.0 Intel Corporation 82801G (ICH7 Family) USB UHCI #1
lspci -v -t: +-1d.1 Intel Corporation 82801G (ICH7 Family) USB UHCI #2
lspci -v -t: +-1d.2 Intel Corporation 82801G (ICH7 Family) USB UHCI #3
lspci -v -t: +-1d.3 Intel Corporation 82801G (ICH7 Family) USB UHCI #4
lspci -v -t: +-1d.7 Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller
lspci -v -t: +-1e.0-[0000:02-03]--+-06.0 Texas Instruments Unknown device 8039
lspci -v -t: | +-06.1 Texas Instruments Unknown device 803a
lspci -v -t: | \-0e.0 Broadcom Corporation BCM4401-B0 100Base-TX
lspci -v -t: +-1f.0 Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
lspci -v -t: +-1f.1 Intel Corporation 82801G (ICH7 Family) IDE Controller
lspci -v -t: \-1f.2 Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI
lspci -n: 00:00.0 0600: 8086:27a0 (rev 03)
lspci -n: 00:02.0 0300: 8086:27a2 (rev 03)
lspci -n: 00:02.1 0380: 8086:27a6 (rev 03)
lspci -n: 00:1b.0 0403: 8086:27d8 (rev 01)
lspci -n: 00:1c.0 0604: 8086:27d0 (rev 01)
lspci -n: 00:1c.1 0604: 8086:27d2 (rev 01)
lspci -n: 00:1c.3 0604: 8086:27d6 (rev 01)
lspci -n: 00:1d.0 0c03: 8086:27c8 (rev 01)
lspci -n: 00:1d.1 0c03: 8086:27c9 (rev 01)
lspci -n: 00:1d.2 0c03: 8086:27ca (rev 01)
lspci -n: 00:1d.3 0c03: 8086:27cb (rev 01)
lspci -n: 00:1d.7 0c03: 8086:27cc (rev 01)
lspci -n: 00:1e.0 0604: 8086:2448 (rev e1)
lspci -n: 00:1f.0 0601: 8086:27b9 (rev 01)
lspci -n: 00:1f.1 0101: 8086:27df (rev 01)
lspci -n: 00:1f.2 0106: 8086:27c5 (rev 01)
lspci -n: 02:06.0 0607: 104c:8039
lspci -n: 02:06.1 0c00: 104c:803a
lspci -n: 02:0e.0 0200: 14e4:170c (rev 02)
lspci -n: 10:00.0 0280: 14e4:4311 (rev 01)
lspci -v: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Capabilities: [e0] Vendor Specific Information
lspci -v:
lspci -v: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: fast devsel, IRQ 10
lspci -v: Memory at f4400000 (32-bit, non-prefetchable) [size=512K]
lspci -v: I/O ports at 4000 [size=8]
lspci -v: Memory at e0000000 (32-bit, prefetchable) [size=256M]
lspci -v: Memory at f4480000 (32-bit, non-prefetchable) [size=256K]
lspci -v: Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Memory at f4500000 (32-bit, non-prefetchable) [size=512K]
lspci -v: Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 10
lspci -v: Memory at f4580000 (64-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
lspci -v: Capabilities: [70] Express Unknown type IRQ 0
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [130] Unknown (5)
lspci -v:
lspci -v: 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
lspci -v: Memory behind bridge: f4000000-f40fffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
lspci -v: I/O behind bridge: 00002000-00003fff
lspci -v: Memory behind bridge: f0000000-f3ffffff
lspci -v: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v: Capabilities: [100] Virtual Channel
lspci -v: Capabilities: [180] Unknown (5)
lspci -v:
lspci -v: 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -v: I/O ports at 4020 [size=32]
lspci -v:
lspci -v: 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -v: I/O ports at 4040 [size=32]
lspci -v:
lspci -v: 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 193
lspci -v: I/O ports at 4060 [size=32]
lspci -v:
lspci -v: 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -v: I/O ports at 4080 [size=32]
lspci -v:
lspci -v: 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -v: Memory at f4584000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] Debug port
lspci -v:
lspci -v: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
lspci -v: I/O behind bridge: 00005000-00005fff
lspci -v: Memory behind bridge: f4100000-f43fffff
lspci -v: Prefetchable memory behind bridge: 0000000020000000-0000000021f00000
lspci -v: Capabilities: [50] #0d [0000]
lspci -v:
lspci -v: 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: Capabilities: [e0] Vendor Specific Information
lspci -v:
lspci -v: 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at 40a0 [size=16]
lspci -v:
lspci -v: 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01) (prog-if 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 50
lspci -v: I/O ports at 13f0 [size=8]
lspci -v: I/O ports at 15f4 [size=4]
lspci -v: I/O ports at 1370 [size=8]
lspci -v: I/O ports at 1574 [size=4]
lspci -v: I/O ports at 40d0 [size=16]
lspci -v: Memory at f4585000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [70] Power Management version 2
lspci -v:
lspci -v: 02:06.0 CardBus bridge: Texas Instruments Unknown device 8039
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 168, IRQ 193
lspci -v: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
lspci -v: Memory window 0: 20000000-21fff000 (prefetchable)
lspci -v: Memory window 1: 22000000-23fff000
lspci -v: I/O window 0: 00005000-000050ff
lspci -v: I/O window 1: 00005400-000054ff
lspci -v: 16-bit legacy interface ports at 0001
lspci -v:
lspci -v: 02:06.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a (prog-if 10)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 185
lspci -v: Memory at f4101000 (32-bit, non-prefetchable) [size=2K]
lspci -v: Memory at f4104000 (32-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 30a2
lspci -v: Flags: bus master, fast devsel, latency 64, IRQ 169
lspci -v: Memory at f4108000 (32-bit, non-prefetchable) [size=8K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 10:00.0 Network controller: Broadcom Corporation Unknown device 4311 (rev 01)
lspci -v: Subsystem: Hewlett-Packard Company Unknown device 1364
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -v: Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v: Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [d0] Express Legacy Endpoint IRQ 0
lspci -v: Capabilities: [100] Advanced Error Reporting
lspci -v: Capabilities: [13c] Virtual Channel
lspci -v:
lspci -x: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
lspci -x: 00: 86 80 a0 27 06 00 90 20 03 00 00 06 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
lspci -x: 00: 86 80 a2 27 03 00 90 00 03 00 00 03 00 00 80 00
lspci -x: 10: 00 00 40 f4 01 40 00 00 08 00 00 e0 00 00 48 f4
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
lspci -x: 00: 86 80 a6 27 07 00 90 00 03 00 80 03 00 00 80 00
lspci -x: 10: 00 00 50 f4 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
lspci -x: 00: 86 80 d8 27 06 00 10 00 01 00 03 04 10 00 00 00
lspci -x: 10: 04 00 58 f4 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -x: 00: 86 80 d0 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 08 08 00 f0 00 00 20
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
lspci -x:
lspci -x: 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
lspci -x: 00: 86 80 d2 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 10 10 00 f0 00 00 20
lspci -x: 20: 00 f4 00 f4 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 04 00
lspci -x:
lspci -x: 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
lspci -x: 00: 86 80 d6 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 20 20 00 20 30 00 00
lspci -x: 20: 00 f0 f0 f3 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 04 00
lspci -x:
lspci -x: 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -x: 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 21 40 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -x: 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 40 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -x: 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 61 40 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
lspci -x:
lspci -x: 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -x: 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 40 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00
lspci -x:
lspci -x: 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
lspci -x: 00: 86 80 cc 27 06 00 90 02 01 20 03 0c 00 00 00 00
lspci -x: 10: 00 40 58 f4 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
lspci -x: 00: 86 80 48 24 07 01 10 00 e1 01 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 03 20 50 50 80 22
lspci -x: 20: 10 f4 30 f4 01 20 f1 21 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
lspci -x:
lspci -x: 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
lspci -x: 00: 86 80 b9 27 07 01 10 02 01 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
lspci -x: 00: 86 80 df 27 05 00 88 02 01 8a 01 01 00 00 00 00
lspci -x: 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
lspci -x: 20: a1 40 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
lspci -x: 00: 86 80 c5 27 07 00 b0 02 01 01 06 01 00 00 00 00
lspci -x: 10: f1 13 00 00 f5 15 00 00 71 13 00 00 75 15 00 00
lspci -x: 20: d1 40 00 00 00 50 58 f4 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00
lspci -x:
lspci -x: 02:06.0 CardBus bridge: Texas Instruments Unknown device 8039
lspci -x: 00: 4c 10 39 80 07 00 10 02 00 00 07 06 20 a8 82 00
lspci -x: 10: 00 00 10 f4 a0 00 00 02 02 03 06 b0 00 00 00 20
lspci -x: 20: 00 f0 ff 21 00 00 00 22 00 f0 ff 23 00 50 00 00
lspci -x: 30: fc 50 00 00 00 54 00 00 fc 54 00 00 0b 01 c0 05
lspci -x: 40: 3c 10 a2 30 01 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 02:06.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a
lspci -x: 00: 4c 10 3a 80 06 00 10 02 00 10 00 0c 10 40 80 00
lspci -x: 10: 00 10 10 f4 00 40 10 f4 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 04
lspci -x:
lspci -x: 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
lspci -x: 00: e4 14 0c 17 06 00 10 00 02 00 00 02 00 40 00 00
lspci -x: 10: 00 80 10 f4 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a2 30
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 10:00.0 Network controller: Broadcom Corporation Unknown device 4311 (rev 01)
lspci -x: 00: e4 14 11 43 07 00 10 00 01 00 80 02 10 00 00 00
lspci -x: 10: 00 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 64 13
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: nls_cp437 5888 1
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 1
lsmod: jfs 158556 0
lsmod: ext3 115976 1
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 1
lsmod: fat 46876 1 vfat
lsmod: eth1394 18180 0
lsmod: b44 22156 0
lsmod: mii 5248 1 b44
lsmod: nls_iso8859_1 4224 3
lsmod: sbp2 19588 0
lsmod: isofs 32192 0
lsmod: ide_disk 14976 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: usb_storage 69696 0
lsmod: vga16fb 11528 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28364 0
lsmod: usbhid 32352 0
lsmod: usbkbd 6656 0
lsmod: thermal 13192 0
lsmod: processor 21952 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 1 ide_cd
lsmod: generic 4356 0 [permanent]
lsmod: sd_mod 16528 5
lsmod: pcmcia 35132 0
lsmod: firmware_class 9728 1 pcmcia
lsmod: piix 9092 0 [permanent]
lsmod: ide_core 111280 30 ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,generic,piix
lsmod: ahci 12676 4
lsmod: libata 52752 1 ahci
lsmod: scsi_mod 122444 5 sbp2,usb_storage,sd_mod,ahci,libata
lsmod: ehci_hcd 27144 0
lsmod: uhci_hcd 27152 0
lsmod: usbcore 111008 7 usb_storage,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd
lsmod: yenta_socket 24076 1
lsmod: rsrc_nonstatic 12160 1 yenta_socket
lsmod: pcmcia_core 37392 3 pcmcia,yenta_socket,rsrc_nonstatic
lsmod: ohci1394 29488 0
lsmod: ieee1394 85816 3 eth1394,sbp2,ohci1394
lsmod: parport_pc 31728 0
lsmod: parport 31944 1 parport_pc
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 254372 436 253936 0% /dev
df: tmpfs 254372 436 253936 0% /dev
df: tmpfs 254372 436 253936 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part7 10657712 1927120 8730592 18% /target
df: /dev/scsi/host0/bus0/target0/lun0/part6 40956376 32840 40923536 0% /target/home
df: /dev/scsi/host0/bus0/target0/lun0/part8 1531168 4 1531164 0% /target/windows/D
free: total used free shared buffers
free: Mem: 508748 484084 24664 0 46672
free: Swap: 763048 432 762616
free: Total: 1271796 484516 787280
cardctl status: Socket 0:
cardctl status: no card
cardctl ident: Socket 0:
cardctl ident: no product info available
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 14
/proc/cpuinfo: model name : Intel(R) Celeron(R) M CPU 430 @ 1.73GHz
/proc/cpuinfo: stepping : 8
/proc/cpuinfo: cpu MHz : 1729.363
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx constant_tsc pni monitor tm2 xtpr
/proc/cpuinfo: bogomips : 3468.10
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 04d0-04d1 : pnp 00:0a
/proc/ioports: 0778-077a : parport0
/proc/ioports: 1000-107f : motherboard
/proc/ioports: 1000-1003 : PM1a_EVT_BLK
/proc/ioports: 1004-1005 : PM1a_CNT_BLK
/proc/ioports: 1008-100b : PM_TMR
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1020-1020 : PM2_CNT_BLK
/proc/ioports: 1028-102f : GPE0_BLK
/proc/ioports: 1100-113f : motherboard
/proc/ioports: 1100-113f : pnp 00:0a
/proc/ioports: 1200-121f : motherboard
/proc/ioports: 1200-121f : pnp 00:0a
/proc/ioports: 1370-1377 : 0000:00:1f.2
/proc/ioports: 1370-1377 : ahci
/proc/ioports: 13f0-13f7 : 0000:00:1f.2
/proc/ioports: 13f0-13f7 : ahci
/proc/ioports: 1574-1577 : 0000:00:1f.2
/proc/ioports: 1574-1577 : ahci
/proc/ioports: 15f4-15f7 : 0000:00:1f.2
/proc/ioports: 15f4-15f7 : ahci
/proc/ioports: 2000-3fff : PCI Bus #20
/proc/ioports: 4000-4007 : 0000:00:02.0
/proc/ioports: 4020-403f : 0000:00:1d.0
/proc/ioports: 4020-403f : uhci_hcd
/proc/ioports: 4040-405f : 0000:00:1d.1
/proc/ioports: 4040-405f : uhci_hcd
/proc/ioports: 4060-407f : 0000:00:1d.2
/proc/ioports: 4060-407f : uhci_hcd
/proc/ioports: 4080-409f : 0000:00:1d.3
/proc/ioports: 4080-409f : uhci_hcd
/proc/ioports: 40a0-40af : 0000:00:1f.1
/proc/ioports: 40a0-40a7 : ide0
/proc/ioports: 40d0-40df : 0000:00:1f.2
/proc/ioports: 40d0-40df : ahci
/proc/ioports: 5000-5fff : PCI Bus #02
/proc/ioports: 5000-50ff : PCI CardBus #03
/proc/ioports: 5400-54ff : PCI CardBus #03
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1f7cffff : System RAM
/proc/iomem: 00100000-00273102 : Kernel code
/proc/iomem: 00273103-00301c23 : Kernel data
/proc/iomem: 1f7d0000-1f7e55ff : reserved
/proc/iomem: 1f7e5600-1f7f7fff : ACPI Non-volatile Storage
/proc/iomem: 1f7f8000-1f7fffff : reserved
/proc/iomem: 20000000-21ffffff : PCI Bus #02
/proc/iomem: 20000000-21ffffff : PCI CardBus #03
/proc/iomem: 22000000-23ffffff : PCI CardBus #03
/proc/iomem: e0000000-efffffff : 0000:00:02.0
/proc/iomem: f0000000-f3ffffff : PCI Bus #20
/proc/iomem: f4000000-f40fffff : PCI Bus #10
/proc/iomem: f4000000-f4003fff : 0000:10:00.0
/proc/iomem: f4100000-f43fffff : PCI Bus #02
/proc/iomem: f4100000-f4100fff : 0000:02:06.0
/proc/iomem: f4100000-f4100fff : yenta_socket
/proc/iomem: f4101000-f41017ff : 0000:02:06.1
/proc/iomem: f4101000-f41017ff : ohci1394
/proc/iomem: f4104000-f4107fff : 0000:02:06.1
/proc/iomem: f4108000-f4109fff : 0000:02:0e.0
/proc/iomem: f4108000-f4109fff : b44
/proc/iomem: f4400000-f447ffff : 0000:00:02.0
/proc/iomem: f4480000-f44bffff : 0000:00:02.0
/proc/iomem: f4500000-f457ffff : 0000:00:02.1
/proc/iomem: f4580000-f4583fff : 0000:00:1b.0
/proc/iomem: f4584000-f45843ff : 0000:00:1d.7
/proc/iomem: f4584000-f45843ff : ehci_hcd
/proc/iomem: f4585000-f45853ff : 0000:00:1f.2
/proc/iomem: f4585000-f45853ff : ahci
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fed20000-fed9afff : reserved
/proc/iomem: feda0000-fedbffff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ffb00000-ffbfffff : reserved
/proc/iomem: fff00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 432992 IO-APIC-edge timer
/proc/interrupts: 1: 958 IO-APIC-edge i8042
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 526 IO-APIC-level acpi
/proc/interrupts: 14: 15608 IO-APIC-edge ide0
/proc/interrupts: 50: 83239 PCI-MSI libata
/proc/interrupts: 169: 0 IO-APIC-level eth0
/proc/interrupts: 177: 0 IO-APIC-level uhci_hcd:usb2
/proc/interrupts: 185: 1 IO-APIC-level ohci1394, uhci_hcd:usb4
/proc/interrupts: 193: 0 IO-APIC-level yenta, uhci_hcd:usb3
/proc/interrupts: 233: 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 432938
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 508748 kB
/proc/meminfo: MemFree: 24464 kB
/proc/meminfo: Buffers: 46672 kB
/proc/meminfo: Cached: 377244 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 229808 kB
/proc/meminfo: Inactive: 208920 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 508748 kB
/proc/meminfo: LowFree: 24464 kB
/proc/meminfo: SwapTotal: 763048 kB
/proc/meminfo: SwapFree: 762616 kB
/proc/meminfo: Dirty: 4160 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 16624 kB
/proc/meminfo: Slab: 37952 kB
/proc/meminfo: CommitLimit: 1017420 kB
/proc/meminfo: Committed_AS: 18568 kB
/proc/meminfo: PageTables: 216 kB
/proc/meminfo: VmallocTotal: 786128 kB
/proc/meminfo: VmallocUsed: 7076 kB
/proc/meminfo: VmallocChunk: 778308 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.4 present.
dmidecode: 23 structures occupying 1029 bytes.
dmidecode: Table at 0x000F3F50.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 24 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Hewlett-Packard
dmidecode: Version: 68YGU Ver. F.07
dmidecode: Release Date: 07/28/2006
dmidecode: Address: 0xE0000
dmidecode: Runtime Size: 128 kB
dmidecode: ROM Size: 1024 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PC Card (PCMCIA) is supported
dmidecode: PNP is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: Smart battery is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode: Targeted content distribution is supported
dmidecode: BIOS Revision: 15.7
dmidecode: Firmware Revision: 64.22
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 27 bytes
dmidecode: System Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Product Name: HP Compaq nx7400 (RH387EA#ABD)
dmidecode: Version: F.07
dmidecode: Serial Number: CNU6421BYP
dmidecode: UUID: EDB43279-97D7-DD11-2B88-6D990C4F5D29
dmidecode: Wake-up Type: Power Switch
dmidecode: SKU Number: RH387EA#ABD
dmidecode: Family: 103C_5336AN
dmidecode:
dmidecode: Handle 0x0040, DMI type 126, 33 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Product Name: 30A2
dmidecode: Version: KBC Version 40.16
dmidecode: Serial Number: Not Specified
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Type: Notebook
dmidecode: Lock: Not Present
dmidecode: Version: Not Specified
dmidecode: Serial Number: CNU6421BYP
dmidecode: Asset Tag: CNU6421BYP
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: External Interface Enabled
dmidecode:
dmidecode: Handle 0x0041, DMI type 126, 32 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: U10
dmidecode: Type: Central Processor
dmidecode: Family: Pentium M
dmidecode: Manufacturer: Intel(R)
dmidecode: ID: E8 06 00 00 FF FB E9 AF
dmidecode: Signature: Type 0, Family 6, Model 14, Stepping 8
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz
dmidecode: Voltage: 1.1 V
dmidecode: External Clock: 133 MHz
dmidecode: Max Speed: 1733 MHz
dmidecode: Current Speed: 1733 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: None
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 64 KB
dmidecode: Maximum Size: 64 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: External
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: None
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PC CARD-Slot 0
dmidecode: Type: 32-bit PC Card (PCMCIA)
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: Adapter 0, Socket 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PC Card-16 is supported
dmidecode: Cardbus is supported
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0008, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: 8
dmidecode:
dmidecode: Handle 0x0009, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: www.hp.com
dmidecode: String 2: ABS 70/71 79 7A 7B 7C
dmidecode:
dmidecode: Handle 0x000A, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: No Error
dmidecode: Number Of Devices: 2
dmidecode:
dmidecode: Handle 0x000B, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x000A
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: SODIMM
dmidecode: Set: None
dmidecode: Locator: DIMM #1
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer:
dmidecode: Serial Number:
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x000C, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x000A
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: SODIMM
dmidecode: Set: None
dmidecode: Locator: DIMM #2
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode: Manufacturer: AD00000000000000
dmidecode: Serial Number: 00003259
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: HYMP564S64BP6-Y5
dmidecode:
dmidecode: Handle 0x000D, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Array Handle: 0x000A
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x000E, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x000F, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x000C
dmidecode: Memory Array Mapped Address Handle: 0x000D
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0010, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0085, DMI type 133, 34 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 85 22 85 00 01 A0 0F 32 10 32 10 02 00 02 00 18
dmidecode: 00 E6 30 00 00 30 2A 02 E0 40 00 00 49 10 4B 10
dmidecode: 52 10
dmidecode: Strings:
dmidecode: 01729 10/19/2006
dmidecode: HP
dmidecode:
dmidecode: Handle 0x0086, DMI type 126, 34 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0011, DMI type 144, 26 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 90 1A 11 00 FF FF FF FF FF FF FF FF FF FF FF FF
dmidecode: FF FF FF FF FF FF FF FF 00 00
dmidecode:
dmidecode: Handle 0x0012, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB storage support
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-common-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Description: Very common SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.22
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.07
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: floppy-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: floppy-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Floppy driver
Package: lowmemcheck
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: serial-modules
Depends: kernel-image-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Serial drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: Common PCMCIA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Core SCSI subsystem
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Core FireWire drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: PCMCIA storage drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: load-cdrom
Status: install ok installed
Version: 1.11
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-core-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Description: CDROM support
Package: fat-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fat-modules
Depends: kernel-image-2.6.16-2-486-di
Description: FAT filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: ide-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Description: IDE drivers
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: input-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: input-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Input devices support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: scsi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: SCSI drivers
Package: hw-detect
Status: install ok installed
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Firmware request modules
Package: sata-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: sata-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Description: SATA drivers
Package: cdrom-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-modules
Depends: ide-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Esoteric CDROM drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.17
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: usb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: USB support
Package: usb-serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB serial drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.16
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: parport-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: parport-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Parallel port support
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-2.6-20060806
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.04
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: crypto-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: ext3-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 668
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.5-1
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1592
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2648
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, crc-modules-2.6.16-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, firewire-core-modules-2.6.16-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 588
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, nic-extra-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: David Mart?nez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 228
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-8
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.10-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: ntfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.19
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---