[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#406008: marked as done (Installation Report - etch RC1 on Fujitsu-Siemens MS-6309)

Your message dated Fri, 12 Jan 2007 20:56:50 +0100
with message-id <200701122056.51200.elendil@planet.nl>
and subject line Bug#406008: Installation Report - etch RC1 on Fujitsu-Siemens MS-6309
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: installation-reports

Boot method: netinst.iso  CD
Image version: http://cdimage.debian.org/cdimage/etch_di_rc1/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 7 Jan 2007 circa 7pm

Machine: Desktop Computer
    product: MS-6309
    vendor: Fujitsu Siemens

Processor:Pentium III (Coppermine) 1 GHz
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
              ext3      273674     72003    187540  28% /
tmpfs        tmpfs      388284         0    388284   0% /lib/init/rw
udev         tmpfs       10240        56     10184   1% /dev
tmpfs        tmpfs      388284         0    388284   0% /dev/shm
/dev/hda1     ext3      241116     13247    215421   6% /boot
/dev/mapper/Saturn-home ext3    27371388    176248  25804756   1% /home
/dev/mapper/Saturn-tmp ext3      388741     10288 358383   3% /tmp
/dev/mapper/Saturn-usr ext3     4922684 345996   4326628 8% /usr
/dev/mapper/Saturn-var ext3 2955216 132240 2672860 5% /var

Output of lspci -nn and lspci -vnn:

cma@Saturn:~$ lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x
[Apollo PRO133x] [1106:0691] (rev c4)
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] [1106:8598]
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super
South] [1106:0686] (rev 22)
00:07.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev
00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 10)
00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 10)
00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] [1106:3057] (rev 30)
00:10.0 Multimedia audio controller [0401]: Ensoniq 5880 AudioPCI
[1274:5880] (rev 02)
00:11.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102
[Rhine-II] [1106:3065] (rev 43)
00:12.0 Communication controller [0780]: Ambient Technologies Inc HaM
controllerless modem [1813:4000] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11
[GeForce2 MX/MX 400] [10de:0110] (rev a1)

Output of $ lspci -vnn attached

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]


Apart from having to disable autodetect of the Cdrom to get the media to
boot, the installation was very smooth/slick; particularly impressive
was the guided LVM partitioning with separate partitions for /, /home,
/usr, /var and /tmp.

Minor issues:  I didn't install anything at the tasksel stage but when I
went to use aptitude after reboot, it wanted a CD inserted.  When
editing the sources.list there were two CD lines: one commented and the
other uncommented.  Commenting the second allowed aptitude to proceed as

The public key was missing until I upgraded gnupg but I guess I wouldn't
have encountered this if I'd accepted some packages at the tasksel

pciutils wasn't installed by default.

Overall, d-i gets better everytime I use it - great work! ... and many
thanks to all!



www.clivemenzies.co.uk ...
...strategies for business

--- End Message ---
--- Begin Message ---
On Friday 12 January 2007 20:18, Clive Menzies wrote:
> So I disabled 'autodetect' in the BIOS for the DVDrom and booted off
> the CDRW.  The box is now a functioning file and IMAP server and I'd
> rather avoid rebooting it to give you the exact BIOS details but if you
> still need them, let me know.  The DVDrom seems to be detected at boot
> with the installed OS; I re-enabled autodetect afterwards; I'm not sure
> it made any difference.

OK. No, no problem.

> It shouldn't except that when I was completing the installation report
> I needed it to give the output of lspci :)

Right, that is why installation-report now recommends pciutils.

Don't think we can beat anything more out of this one. Let's close it.
Thanks for your quick follow-ups


Attachment: pgp2HsBtMiRqH.pgp
Description: PGP signature

--- End Message ---

Reply to: