[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#405971: Installation report: works on SGI 02 (mips r5k-ip32)



Package: installation-reports

Boot method: netboot
Image version: http://people.debian.org/~ths/d-i/mips/images/daily/r5k-ip32/netboot-boot.img
Date: Sun Jan  7 18:06:53 CET 2007

Machine: SGI O2
Processor: r5k,195 Mhz
Memory: 64 MB
Partitions: 
    erwin:~# fdisk -l /dev/sda

    Disk /dev/sda (SGI disk label): 141 heads, 62 sectors, 1016 cylinders
    Units = cylinders of 8742 * 512 bytes

    ----- partitions -----
    Pt#    Device  Info     Start       End   Sectors  Id  System
    1: /dev/sda1  boot         5       960   8357352  83  Linux native
    2: /dev/sda2  swap       961      1015    480810  83  Linux native
    9: /dev/sda3               0         4     43710   0  SGI volhdr
    11: /dev/sda4               0      1015   8881872   6  SGI volume
    ----- Bootinfo -----
    Bootfile: /unix
    ----- Directory Entries -----
    0: arcboot    sector    4 size   70376


Output of lspci -nn and lspci -vnn:

    erwin:~# lspci -nn
    00:01.0 SCSI storage controller [0100]: Adaptec AIC-7880U [9004:8078]
    00:02.0 SCSI storage controller [0100]: Adaptec AIC-7880U [9004:8078]
    erwin:~# lspci -vnn
    00:01.0 SCSI storage controller [0100]: Adaptec AIC-7880U [9004:8078]
	    Flags: bus master, medium devsel, latency 16, IRQ 9
	    I/O ports at 1000 [disabled] [size=256]
	    Memory at 280020000 (32-bit, non-prefetchable) [size=4K]
	    [virtual] Expansion ROM at 280000000 [disabled] [size=64K]

    00:02.0 SCSI storage controller [0100]: Adaptec AIC-7880U [9004:8078]
	    Flags: bus master, medium devsel, latency 16, IRQ 10
	    I/O ports at 1400 [disabled] [size=256]
	    Memory at 280021000 (32-bit, non-prefetchable) [size=4K]
	    [virtual] Expansion ROM at 280010000 [disabled] [size=64K]

    erwin:~# 


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Install base system:    [O]
Clock/timezone setup:   [ ]
User/password setup:    [O]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [O]

Comments/Problems:

The machine has 64M of RAM and the d-i installs in a low-memory-mode, which
results in directly using fdisk to create the partitions. Does Debian now
need > 64M RAM to offer a decent partition interface?

mfg

Joerg Hoh

Attachment: signature.asc
Description: Digital signature


Reply to: