Bug#404718: Installation Report [sparc64] [daily-20061227] [Failure] Sun Ultra-10 Creator3D
Op 27-12-2006 om 21:37 schreef Frans Pop:
>
> This still looks like a known problem with dual video cards.
> Please try booting the installer with parameter "video=atyfb:off"
> (assuming the onboard is an ATI card).
Another suggestion, from #305230
| > What memory configuration do you have? What CPU speed? If 4 sticks,
| > try removing 2. If 2, try moving to the other pair of slots. (Mine
| > had 4x32M, d-i worked with 2x32M in slots closest to disk. After
| > install the system booted fine with all 4 sticks.)
|
| Thanks a lot. I have performed (with David, the initial submitter) two
| new attempts, on Ultra 5 and Ultra 10 both with 384 MB of RAM (2 x 64
| + 2 x 128).
|
| The bug does occur in these configuration in both cases with default
| RC3 kernel 2.4.
|
| Your workaround (removing the 2 x 64 MB sticks) worked both times.
HtH
GSt
Reply to: