Bug#385398: Fwd: Re: Bug#385398: thinkpad 380Z installation problems with Syba 10/100 pcmcia NIC realtek 8139 chipset Testing
On Fri, 15 Sep 2006 05:35:01 +0200, "Frans Pop" <elendil@planet.nl>
said:
> (Please reply below the text you respond to; makes reading more natural.
> Also, please reply to the bug report and not privately; reply-to set this
> time.)
>
> On Friday 15 September 2006 04:59, you wrote:
> > On Thu, 14 Sep 2006 00:00:42 +0200, "Frans Pop" said:
> > > On Thursday 31 August 2006 04:06, John Kerr Anderson wrote:
> > > > The install went well until it got to ethernet configuration and it
> > > > refused to recognise any driver I used. 8139cp or 8139too.
> > > > Suprised that this card will not work in Debian as I have had PCI
> > > > NIC that worked flawless. It works in Xubuntu fine, but I prefer
> > > > Debian anyday!
> > >
> > > With which kernel version and which module does it work in ubuntu?
> >
> > It works with 8139too in Ubuntu kernel 2.6.15.23-386 the Syba, realtek
> > based 8139 pcmcia ethernet adapter. thank you for your questions, hope
> > this sheds some light on the issue.
>
> Hmm. Knowing that it worked with an older kernel version does not really
> help I'm afraid.
>
> What I'm wondering if the problem could be that the pcmcia layer is not
> loaded or initialized correctly. However, I have no idea how you could
> check that. Maybe you could check the syslog and output of dmesg to see
> if the card is recognized.
>
> Do you know if that driver needs firmware loaded? If that is the case,
> then that is almost certainly the cause.
Hi, sorry it has been a little while, was on holiday and not readily
equipped to respond. The first bit is from dmesg command whilst running
Xubuntu Dapper. The 2nd is the dmesg output from the daily build of
Debian testing 24 sept. 2006.
------------------------------------------------------------------------
17179569.184000] Linux version 2.6.15-26-686 (buildd@terranova) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:13:28
UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000009fd0000
(usable)
[17179569.184000] BIOS-e820: 0000000009fd0000 - 0000000009fdf000 (ACPI
data)
[17179569.184000] BIOS-e820: 0000000009fdf000 - 0000000009fe0000 (ACPI
NVS)
[17179569.184000] BIOS-e820: 0000000009fe0000 - 000000000a000000
(reserved)
[17179569.184000] BIOS-e820: 00000000fffe0000 - 0000000100000000
(reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 159MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 40912
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 36816 pages, LIFO batch:7
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.0 present.
[17179569.184000] ACPI: RSDP (v000 IBM
) @ 0x000fd6e0
[17179569.184000] ACPI: RSDT (v001 IBM TP380Z 0x00000001
0x00000000) @ 0x09fd0000
[17179569.184000] ACPI: FADT (v001 IBM TP380Z 0x00000001
0x00000000) @ 0x09fd0100
[17179569.184000] ACPI: BOOT (v001 IBM TP380Z 0x00000001
0x00000000) @ 0x09fd0040
[17179569.184000] ACPI: DSDT (v001 IBM TP380Z 0x0000000a MSFT
0x0100000a) @ 0x00000000
[17179569.184000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force
is required to enable ACPI
[17179569.184000] ACPI: Disabling ACPI support
[17179569.184000] Allocating PCI resources starting at 10000000 (gap:
0a000000:f5fe0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can
enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (011a9000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[ 0.000000] Detected 298.471 MHz processor.
[ 636.928914] Using tsc for high-res timesource
[ 636.931007] Console: colour VGA+ 80x25
[ 636.932534] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 636.933792] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 636.976296] Memory: 150888k/163648k available (2110k kernel code,
12208k reserved, 595k data, 332k init, 0k highmem)
[ 636.976324] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 637.055570] Calibrating delay using timer specific routine.. 598.17
BogoMIPS (lpj=1196341)
[ 637.055851] Security Framework v1.0.0 initialized
[ 637.055912] SELinux: Disabled at boot.
[ 637.056023] Mount-cache hash table entries: 512
[ 637.056754] CPU: After generic identify, caps: 0183f9ff 00000000
00000000 00000000 00000000 00000000 00000000
[ 637.056806] CPU: After vendor identify, caps: 0183f9ff 00000000
00000000 00000000 00000000 00000000 00000000
[ 637.056863] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 637.056881] CPU: L2 cache: 512K
[ 637.056902] CPU: After all inits, caps: 0183f9ff 00000000 00000000
00000040 00000000 00000000 00000000
[ 637.057007] mtrr: v2.0 (20020519)
[ 637.057039] Enabling fast FPU save and restore... done.
[ 637.057064] Checking 'hlt' instruction... OK.
[ 637.071736] SMP alternatives: switching to UP code
[ 637.073184] checking if image is initramfs... it is
[ 640.743909] Freeing initrd memory: 6809k freed
[ 640.819496] CPU0: Intel Pentium II (Deschutes) stepping 02
[ 640.819554] SMP motherboard not detected.
[ 640.819574] Local APIC not detected. Using dummy APIC emulation.
[ 640.820145] Brought up 1 CPUs
[ 640.822550] NET: Registered protocol family 16
[ 640.822755] EISA bus registered
[ 640.825512] PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=0
[ 640.825558] PCI: Using configuration type 1
[ 640.828499] ACPI: Subsystem revision 20051216
[ 640.828516] ACPI: Interpreter disabled.
[ 640.828540] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 640.828590] pnp: PnP ACPI: disabled
[ 640.828613] PnPBIOS: Scanning system for PnP BIOS support...
[ 640.828801] PnPBIOS: Found PnP BIOS installation structure at
0xc00fe700
[ 640.828824] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe724, dseg
0xf0000
[ 640.967333] PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by
driver
[ 640.967432] PCI: Probing PCI hardware
[ 640.967457] PCI: Probing PCI hardware (bus 00)
[ 640.968220] Boot video device is 0000:00:03.0
[ 640.968724] PCI quirk: region ef00-ef3f claimed by PIIX4 ACPI
[ 640.968745] PCI quirk: region efa0-efaf claimed by PIIX4 SMB
[ 640.968774] PIIX4 devres I PIO at 002e-002f
[ 640.968791] PIIX4 devres J PIO at 15e8-15ef
[ 640.971883] PCI: Using IRQ router PIIX/ICH [8086/7110] at
0000:00:06.0
[ 640.975155] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 640.975179] pnp: 00:0a: ioport range 0x15e0-0x15ef has been reserved
[ 640.975201] pnp: 00:0a: ioport range 0xef00-0xefaf could not be
reserved
[ 640.976993] PCI: Ignore bogus resource 6 [0:0] of 0000:00:03.0
[ 640.977056] PCI: Bus 1, cardbus bridge: 0000:00:02.0
[ 640.977073] IO window: 00001000-000010ff
[ 640.977094] IO window: 00001400-000014ff
[ 640.977115] PREFETCH window: 10000000-11ffffff
[ 640.977135] MEM window: 12000000-13ffffff
[ 640.977154] PCI: Bus 5, cardbus bridge: 0000:00:02.1
[ 640.977169] IO window: 00001800-000018ff
[ 640.977187] IO window: 00001c00-00001cff
[ 640.977207] PREFETCH window: 14000000-15ffffff
[ 640.977227] MEM window: 16000000-17ffffff
[ 640.977290] PCI: Found IRQ 11 for device 0000:00:02.0
[ 640.977319] PCI: Sharing IRQ 11 with 0000:00:03.0
[ 640.977383] PCI: Found IRQ 11 for device 0000:00:02.1
[ 640.977841] Simple Boot Flag at 0x33 set to 0x1
[ 640.981496] audit: initializing netlink socket (disabled)
[ 640.981563] audit(1159131496.156:1): initialized
[ 640.982456] VFS: Disk quotas dquot_6.5.1
[ 640.982632] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 640.983028] Initializing Cryptographic API
[ 640.983058] io scheduler noop registered
[ 640.983120] io scheduler anticipatory registered
[ 640.983156] io scheduler deadline registered
[ 640.983239] io scheduler cfq registered
[ 640.983264] Limiting direct PCI/PCI transfers.
[ 640.984349] isapnp: Scanning for PnP cards...
[ 641.338624] isapnp: No Plug & Play device found
[ 641.480111] Real Time Clock Driver v1.12
[ 641.481545] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq
1,12
[ 641.491524] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 641.492701] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 641.493082] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
[ 641.493622] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 641.509856] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 641.515004] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 641.515410] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 641.515438] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 641.516316] mice: PS/2 mouse device common for all mice
[ 641.519095] EISA: Probing bus 0 at eisa.0
[ 641.519131] Cannot allocate resource for EISA slot 1
[ 641.519193] Cannot allocate resource for EISA slot 8
[ 641.519208] EISA: Detected 0 cards.
[ 641.519796] NET: Registered protocol family 2
[ 641.536778] input: AT Translated Set 2 keyboard as
/class/input/input0
[ 641.558652] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 641.559679] TCP established hash table entries: 8192 (order: 4, 98304
bytes)
[ 641.560644] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[ 641.561624] TCP: Hash tables configured (established 8192 bind 8192)
[ 641.561644] TCP reno registered
[ 641.562524] TCP bic registered
[ 641.562591] NET: Registered protocol family 1
[ 641.562636] NET: Registered protocol family 8
[ 641.562651] NET: Registered protocol family 20
[ 641.562792] Using IPI No-Shortcut mode
[ 641.563093] Freeing unused kernel memory: 332k freed
[ 641.916525] vga16fb: initializing
[ 641.916561] vga16fb: mapped to 0xc00a0000
[ 642.077179] Console: switching to colour frame buffer device 80x25
[ 642.077212] fb0: VGA16 VGA frame buffer device
[ 643.411399] Capability LSM initialized
[ 646.735274] PIIX4: IDE controller at PCI slot 0000:00:06.1
[ 646.735363] PIIX4: chipset revision 1
[ 646.735378] PIIX4: not 100% native mode: will probe irqs later
[ 646.735427] ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings:
hda:DMA, hdb:DMA
[ 646.735504] Probing IDE interface ide0...
[ 647.024275] hda: TOSHIBA MK6015MAP, ATA DISK drive
[ 647.472130] hdb: SANYO CRD-S372BV, ATAPI CD/DVD-ROM drive
[ 647.528516] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 647.578025] hda: max request size: 128KiB
[ 648.285919] hda: 11733120 sectors (6007 MB), CHS=12416/15/63,
UDMA(33)
[ 648.285964] hda: cache flushes not supported
[ 648.287187] hda: hda1 hda2
[ 648.335152] hdb: ATAPI 24X CD-ROM drive, 256kB Cache, DMA
[ 648.335199] Uniform CD-ROM driver Revision: 3.20
[ 649.167774] usbcore: registered new driver usbfs
[ 649.169851] usbcore: registered new driver hub
[ 649.185936] USB Universal Host Controller Interface driver v2.3
[ 649.188229] PCI: Found IRQ 11 for device 0000:00:06.2
[ 649.188318] uhci_hcd 0000:00:06.2: UHCI Host Controller
[ 649.190741] uhci_hcd 0000:00:06.2: new USB bus registered, assigned
bus number 1
[ 649.190798] uhci_hcd 0000:00:06.2: irq 11, io base 0x00008000
[ 649.193570] hub 1-0:1.0: USB hub found
[ 649.193655] hub 1-0:1.0: 2 ports detected
[ 649.402491] Probing IDE interface ide1...
[ 650.166464] Attempting manual resume
[ 650.318437] EXT3-fs: mounted filesystem with ordered data mode.
[ 650.318972] kjournald starting. Commit interval 5 seconds
[ 669.687089] piix4_smbus 0000:00:06.3: Found 0000:00:06.3 device
[ 669.687121] piix4_smbus 0000:00:06.3: IBM Laptop detected; this
module may corrupt your serial eeprom! Refusing to load module!
[ 669.687152] piix4_smbus: probe of 0000:00:06.3 failed with error -1
[ 669.858725] IBM TrackPoint firmware: 0x0b, buttons: 2/3
[ 669.894296] input: TPPS/2 IBM TrackPoint as /class/input/input1
[ 669.915965] PCI: Found IRQ 11 for device 0000:00:02.0
[ 669.916005] PCI: Sharing IRQ 11 with 0000:00:03.0
[ 669.916070] Yenta: CardBus bridge found at 0000:00:02.0 [1014:0092]
[ 669.916156] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 669.916171] Yenta: Routing CardBus interrupts to PCI
[ 669.916193] Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl
0x62
[ 669.930058] input: PC Speaker as /class/input/input2
[ 670.193159] Yenta: ISA IRQ mask 0x06b8, PCI irq 11
[ 670.193184] Socket status: 30000020
[ 670.193908] PCI: Found IRQ 11 for device 0000:00:02.1
[ 670.194016] Yenta: CardBus bridge found at 0000:00:02.1 [1014:0092]
[ 670.194068] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 670.194083] Yenta: Routing CardBus interrupts to PCI
[ 670.194105] Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl
0x62
[ 670.425048] Yenta: ISA IRQ mask 0x06b8, PCI irq 11
[ 670.425073] Socket status: 30000010
[ 670.827874] pccard: CardBus card inserted into slot 0
[ 671.127742] pccard: PCMCIA card inserted into slot 1
[ 671.658222] Floppy drive(s): fd0 is 1.44M
[ 671.673044] FDC 0 is a National Semiconductor PC87306
[ 672.332685] pnp: Device 00:0b activated.
[ 672.332712] parport: PnPBIOS parport detected.
[ 672.332775] parport0: PC-style at 0x3bc, irq 7 [PCSPP]
[ 674.349071] pnp: Device 00:10 activated.
[ 674.368256] gameport: NS558 PnP Gameport is pnp00:10/gameport0, io
0x200, speed 677kHz
[ 674.580344] irda_init()
[ 674.580460] NET: Registered protocol family 23
[ 674.677195] pnp: Device 00:13 activated.
[ 674.677232] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ;
irq 5 ; dma 1.
[ 674.677294] nsc-ircc, chip->init
[ 674.677310] nsc-ircc, Found chip at base=0x02e
[ 674.677353] nsc-ircc, driver loaded (Dag Brattli)
[ 674.680489] IrDA: Registered device irda0
[ 674.680572] nsc-ircc, Found dongle: Reserved
[ 674.680590] nsc_ircc_init_dongle_interface(), Reserved not defined by
irda yet
[ 674.803990] cs: IO port probe 0x100-0x3af: clean.
[ 674.805401] cs: IO port probe 0x3e0-0x4ff: clean.
[ 674.806103] cs: IO port probe 0x820-0x8ff: clean.
[ 674.806847] cs: IO port probe 0xc00-0xcf7: clean.
[ 674.808123] cs: IO port probe 0xa00-0xaff: clean.
[ 675.185396] ts: Compaq touchscreen protocol output
[ 675.484394] cs: IO port probe 0x100-0x3af: clean.
[ 675.485809] cs: IO port probe 0x3e0-0x4ff: clean.
[ 675.486560] cs: IO port probe 0x820-0x8ff: clean.
[ 675.487192] cs: IO port probe 0xc00-0xcf7: clean.
[ 675.488481] cs: IO port probe 0xa00-0xaff: clean.
[ 675.489247] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 675.500091] pcmcia: registering new device pcmcia1.0
[ 675.717173] 8139too Fast Ethernet driver 0.9.27
[ 675.722591] PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
[ 675.722663] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 675.724603] eth0: RealTek RTL8139 at 0xca956000, 00:e0:4c:00:03:d3,
IRQ 11
[ 675.724623] eth0: Identified 8139 chip type 'RTL-8139C'
[ 675.846005] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[ 676.716767] 1.0: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
[ 676.783565] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 678.033391] NET: Registered protocol family 17
[ 678.398468] lp0: using parport0 (interrupt-driven).
[ 679.009760] Adding 168672k swap on /dev/hda2. Priority:-1 extents:1
across:168672k
[ 679.820992] EXT3 FS on hda1, internal journal
[ 680.547874] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 680.547901] md: bitmap version 4.39
[ 682.590857] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel@redhat.com
[ 682.933645] NET: Registered protocol family 10
[ 682.934593] lo: Disabled Privacy Extensions
[ 682.935703] IPv6 over IPv4 tunneling driver
[ 684.082804] cdrom: open failed.
[ 693.639856] eth0: no IPv6 routers present
[ 707.669492] ppdev: user-space parallel port driver
[ 708.595684] IBM machine detected. Enabling interrupts during APM
calls.
[ 708.597180] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 713.117452] hdb: drive_cmd: status=0x51 { DriveReady SeekComplete
Error }
[ 713.117501] hdb: drive_cmd: error=0x04 { AbortedCommand }
[ 713.117520] ide: failed opcode was: 0xec
[ 718.099655] Non-volatile memory driver v1.2
[ 718.143790] input: /usr/sbin/thinkpad-keys as /class/input/input3
--------------------------------------------------------------------
Output from booting Debian Testing daily buildnetinst CD 22 Sept.
version.
---------------------------------------------------------------------
ACPI: PCI Interrupt Link [LNKB] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP Hash tables configured (established 8192 bind 4096)
TCP reno registered
Simple Boot Flag at 0x33 set to 0x1
* Found PM-Timer Bug on this chipset. Due to workarounds for a bug,
* this time source is slow. Consider trying other time sources (clock=)
audit: intializing netlink socket (disabled)
audit(1159134108.704:1): intialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192k size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol fmaily 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
AcPI wakeup devices:
LID0 SLPB PCI0 UAR1 BAT0 USB0
ACPI: (supports S0 S1 S2 S3 S4 S5)
Freeing unused kernel memory: 252k freed
input: AT Translated Set 2 Keyboard as /class/input/input0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver 3.0
ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug.
ACPI: PCI Interrupt Link [LNKD} BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:06.2[D] -> Link [LNKD] -> GSI 10 (level,
low) -> IRQ 10
uhci_hcd 0000:00:06.2: UHCI Controller
uhci_hcd 0000:00:06.2: new USB bus registered, assigned bus number 1
irq 10: nobody cared (try booting with the "irqpoll" option)
<b012f163> __report_bad_irq+0x2b/0x69 <b012f30b>
note_interrupt+0x16a/0x197
<b012ed4a> handle_IRQ_event+0x23/0x4c <b012eddd> __do_IRQ+0x6a/0x91
<b01105149> do_IRQ+0x19/0x24 <b01039da> common_interrupt+0x1e/0x24
<b012007b> sys_setresuid+0xf0/0x1a7 <b0118f84> __do_softirq+0x2c/0x7f
<b0118ff9> do_softirq+0x22/0x26 <b010514e> do_IRQ+0x1e/0x24
<b01039da> common_interrupt+0x1a/0x20 <b012efcb> setup_irq+0x97/0xed
<ba84b3a9> usb_hcd_irq+0x0/0x4a [usbcore] <b012f08c>
request_irq+0x6b/0x86
<b084b023> usb_add_hvf+0x250/0x4e8 [usbcore] <ba851e13>
usb_hcd_pci_probe+0x1ec/0x285 [usbcore]
<b01f9c1e> __driver_attach+0x0/0x59 <b01aef13>
pci_device_probe+0x36/0x57
<b01f9b81> driver_probe_device+0x42/0x8b <b01f9c54>
__driver_attach+0x36/0x59
<b01f96ac> bus_for_each_dev+037/0x59 <b01f9aeb> driver_attach+0x11/0x13
<b01f9c1e> __pci_register_driver+90x34/0x4e <ba80b055>
uhci_hcd_init+0x55/0x88 [uhci_hcd]
<b012846b> sys_init_module+_0x1213/0x136f <b0143e06>
kmem_cache_destroy+0x0/0xea
<b0102977> syscall_call+0x7/0xb
handlers:
[<ba84b3a9>] (usb_hcd_irq+0x0/0x4a [usbcore])
Disabled IRQ #10
uhci_hcd 0000:00:06.2: IRQ 10, io base 0x00008000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E0IDE driver Revision: 7.00alpha2
ide: Assuming 33Mhz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:06.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
-----------------------
John Kerr Anderson
johnan@fmail.co.uk
Tel: 989 793 7720
Mobile: 989 482 8115
Reply to: