Bug#388591: nobootloader: [powerpc]

[Sven Luther <sven.luther@wanadoo.fr>]

Patch attached ...


Index: debian/nobootloader.templates
===================================================================
--- debian/nobootloader.templates	(revision 40806)
+++ debian/nobootloader.templates	(working copy)
@@ -7,10 +7,10 @@
 Type: note
 #flag:translate!:3,6
 _Description: Setting firmware variables for automatic boot
- Some variables need to be set in the Pegasos OpenFirmware in order for
- your system to boot linux automatically.  At the end of the installation,
- the system will reboot.  At the Pegasos OpenFirmware prompt, set the
- following OpenFirmware variables to enable auto-booting:
+ Some variables need to be set in the Genesi firmware in order for your
+ system to boot automatically.  At the end of the installation, the
+ system will reboot.  At the firmware prompt, set the following
+ firmware variables to enable auto-booting:
  .
   setenv boot-device ${OF_BOOT_DEVICE}
   setenv boot-file ${OF_BOOT_FILE}
@@ -18,13 +18,14 @@
   setenv auto-boot? true
  .
  You will only need to do this once.  Afterwards, enter the "boot" command
- or reboot the system to proceed to the next installation stage.
+ or reboot the system to proceed to your newly installed Debian GNU/Linux
+ system.
  .
  Alternatively, you will be able to boot the kernel manually by entering :
  .
   ${KERNEL_BOOT}
  .
- at the OpenFirmware prompt.
+ at the firmware prompt.
 
 Template: nobootloader/confirmation_arm_netwinder_nettrom
 Type: note
@@ -45,7 +46,8 @@
     save-all
  .
  You will only need to do this once.  Afterwards, enter the "boot" command
- or reboot the system to proceed to the next installation stage.
+ or reboot the system to proceed to your newly installed Debian GNU/Linux
+ system.
 
 Template: nobootloader/confirmation_common
 Type: note