[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#379182: Installation Report

Package: installation-reports

Boot method: 3.1r2 binary cd
Image version: 2006 jun 30 debian.org
Date: 2006 duly 20

Machine: HP Vectra VL400
Processor: Intel PIII 933MHz
Memory: 384MB
Partitions:

Output of "sfdisk -d /dev/hda" :
# partition table of /dev/hda
unit: sectors

/dev/hda1 : start=       63, size=   192717, Id=83
/dev/hda2 : start=   192780, size=  1012095, Id=82
/dev/hda3 : start=  1204875, size= 38636325, Id=8e
/dev/hda4 : start=        0, size=        0, Id= 0

Output of "df -Tl":
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/mapper/debian-base
         reiserfs    14073420    585708  13487712   5% /
tmpfs        tmpfs      192964         0    192964   0% /dev/shm
/dev/hda1     ext3       90297     10768     74712  13% /boot
/dev/mapper/debian-home
         reiserfs     5242716     32856   5209860   1% /home


Output of lspci and lspci -n:

Output of "lspci":
lspci
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 02) 
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:01:04.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 

Outpus of "lspci -n"
0000:00:00.0 0600: 8086:1130 (rev 02)
0000:00:02.0 0300: 8086:1132 (rev 02)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f.1 0101: 8086:2411 (rev 02)
0000:00:1f.2 0c03: 8086:2412 (rev 02)
0000:00:1f.3 0c05: 8086:2413 (rev 02)
0000:01:04.0 0200: 10b7:9200 (rev 78)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:
No problems, all worked well.

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature

Reply to: