Bug#325728: Positive Installation Report
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
ftp://mirror.switch.ch/mirror/debian-cd/current/i386/iso-cd/debian-31r0a-i386-binary-1.iso
uname -a: Linux blackmesa 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005
i686 GNU/Linux
Date: 28.08.2005, at around 17:00h
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
Machine: built from different parts
Processor: AMD Athlon(tm) XP 1800+
Memory: 768 MB DDR-DIMM
Root Device: IDE, /dev/hda
Root Size/partition table:
/dev/hda1 on / type reiserfs (rw)
/dev/hda2 on /boot type ext2 (rw)
/dev/hda7 on /home type reiserfs (rw)
/dev/hda8 on /home/vmail type reiserfs (rw,noatime)
/dev/hda6 on /tmp type reiserfs (rw,noatime)
/dev/hda10 on /var/lib/mysql type reiserfs (rw,noatime)
/dev/hda9 on /var/log type reiserfs (rw)
/dev/hda11 on /var/www type reiserfs (rw,noatime)
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
0000:00:05.0 Unknown mass storage controller: Promise Technology, Inc.:
Unknown device 3d18 (rev 02)
0000:00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128
RF/SG AGP
Info: "unknown mass storage controller" = Promise PDC20518 SATAII150 TX4
0000:00:00.0 0600: 1106:3099
0000:00:01.0 0604: 1106:b099
0000:00:05.0 0180: 105a:3d18 (rev 02)
0000:00:07.0 0200: 10ec:8139 (rev 10)
0000:00:11.0 0601: 1106:3074
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:01:00.0 0300: 1002:5246
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Couldn't get Promise PDC20518 SATAII150 TX4 to work with a 2.6 kernel. So i
had to use Promises' proprietary driver with a 2.4 kernel from
http://www.promise.com/support/file/driver/1_SATAII%20Linux%20source%20code.tgz.
But this SATA-card isn't being used although it works with a 2.4 kernel.
P.S. Thanks to the whole Debian Team for your great work.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
--
E-Mail: oli@lugh.ch
WWW: http://www.lugh.ch
Reply to: