Bug#321610: installation completed but with troubles
Package: installation-reports
Debian-installer-version: i386 netinst cd image from cdimages.d.o downloaded 2005-08-06 11:35 +0200
uname -a: Linux saint-ex 2.6.11-9-em64t-p4-smp #1 SMP Mon Jun 27 23:02:54 MDT 2005 x86_64 GNU/Linux
Date: 2005-08-06 12:00 +0200
Method: netinst expert26 vga=795
Machine: Dell 9100
Processor: Intel P4 Dual Core 3.0 GHz
Memory: 1 G
Root Device: sata /dev/sde
Root Size/partition table:
Disk /dev/sde: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 62 497983+ 83 Linux
/dev/sde2 63 305 1951897+ 83 Linux
/dev/sde3 306 19452 153798277+ 5 Extended
/dev/sde5 306 7600 58597056 8e Linux LVM
/dev/sde6 7601 7843 1951866 82 Linux swap / Solaris
/dev/sde7 7844 19452 93249261 8e Linux LVM
installation is on /dev/sde2 (this is a test partition, my real system
will be on other partitions)
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2770
0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2771
0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 27d0 (rev 01)
0000:00:1c.4 PCI bridge: Intel Corp.: Unknown device 27e0 (rev 01)
0000:00:1c.5 PCI bridge: Intel Corp.: Unknown device 27e2 (rev 01)
0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 27c8 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 27c9 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 27ca (rev 01)
0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 27cb (rev 01)
0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 27cc (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 27b8 (rev 01)
0000:00:1f.1 IDE interface: Intel Corp.: Unknown device 27df (rev 01)
0000:00:1f.2 0106: Intel Corp.: Unknown device 27c1 (rev 01)
0000:00:1f.3 SMBus: Intel Corp.: Unknown device 27da (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00c1 (rev a2)
0000:05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:05:04.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:05:04.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)
0000:05:04.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
0000:05:05.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61)
0000:05:08.0 Ethernet controller: Intel Corp.: Unknown device 27dc (rev 01)
lspci -n
0000:00:00.0 0600: 8086:2770
0000:00:01.0 0604: 8086:2771
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1c.4 0604: 8086:27e0 (rev 01)
0000:00:1c.5 0604: 8086:27e2 (rev 01)
0000:00:1d.0 0c03: 8086:27c8 (rev 01)
0000:00:1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7 0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0106: 8086:27c1 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:01:00.0 0300: 10de:00c1 (rev a2)
0000:05:02.0 0200: 10ec:8139 (rev 10)
0000:05:04.0 0401: 1102:0004 (rev 04)
0000:05:04.1 0980: 1102:7003 (rev 04)
0000:05:04.2 0c00: 1102:4001 (rev 04)
0000:05:05.0 0c00: 11c1:5811 (rev 61)
0000:05:08.0 0200: 8086:27dc (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
Comments/Problems:
Config network:
no route set (problem is already known and reported)
I set it up manually
Detect hard drives
I have to select ahci manually
Reboot:
Kernel panic, I investigate a bit and found kernel 2.6.8 as not the
ahci module in its initrd, so
I went back to the installer and tried to configure second stage from
first but it failed (do nothing without error reported), so
I chrooted into /target, and
I installed kernel 2.6.11 from unstable, then
I reboot with new 2.6.11 kernel, but
I got an error:
whiptail [9606]: segfault at 0000000000000000 rip 00000000556f0f3b rsp 00000000ffffce98 error 4
a complain about menu/.mnu file not found and
"Init: Id "1" respawning too fast", so
I touched menu/.mnu in /usr/lib/base-config repository, and
I went back to the installer, chrooted in /target and install whiptail
from unstable, and
I run base-config but it doesn't want to setup a French environment,
I reboot
it succeed!
I upgraded all installed packages and lost aptitude due to a known
dependency problem
I don't have my French environment, but I'll try again this afternoon
BTW:
The onboard ethernet is not found
Regards
Nicolas
--
Reply to: