Bug#306358: (no subject)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: netinst rc3 powerpc
uname -a: Linux arkadia 2.6.11-powerpc #1 Mon Apr 4 04:03:40 CEST 2005 ppc GNU/Linux
Date: 2005-04-08 21:00 (GMT)
Method: Booted from CD, did a clean install, and used the whole disk.
Machine: WindTunnel PowerMac (with nVidia card)
Processor: G4 PPC 1.0 GHz (Single processor)
Memory: 768 MB PC2100
Root Device: hda: ST360015A, ATA DISK drive (60 GB disk, factory original)
Root Size/partition table:
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 1954 @ 64 (977.0k) NewWorld bootblock
/dev/hda3 Apple_UNIX_SVR2 untitled 112693360 @ 2018 ( 53.7G) Linux native
/dev/hda4 Apple_UNIX_SVR2 swap 4536030 @ 112695378 ( 2.2G) Linux swap
Block size=512, Number of Blocks=117231408
DeviceType=0x0, DeviceId=0x0
Output of lspci and lspci -n:
/ % sudo lspci
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: nVidia Corporation: Unknown device 0184 (rev a2)
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:10:17.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:20:0d.0 ff00: Apple Computer Inc. UniNorth 2 ATA/100
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 01)
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM)
/ % sudo lspci -n
0000:00:0b.0 0600: 106b:0034
0000:00:10.0 0300: 10de:0184 (rev a2)
0001:10:0b.0 0600: 106b:0035
0001:10:17.0 ff00: 106b:0022 (rev 03)
0001:10:18.0 0c03: 106b:0019
0001:10:19.0 0c03: 106b:0019
0001:10:1b.0 0c03: 1033:0035 (rev 43)
0001:10:1b.1 0c03: 1033:0035 (rev 43)
0001:10:1b.2 0c03: 1033:00e0 (rev 04)
0002:20:0b.0 0600: 106b:0036
0002:20:0d.0 ff00: 106b:0033
0002:20:0e.0 0c00: 106b:0031 (rev 01)
0002:20:0f.0 0200: 106b:0032
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O] (No DHCP used)
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Very nice - but then, I was one of those who didn't have a problem with
boot-floppies either. I had no problems with the installation at all. The only
question I have - why isn't alsa-base part of the base system?
Reply to: