Package: installation-reports Debian-installer-version: <sarge-net-install.iso April 3 2005> uname -a: Linux totem 2.4.27-2-686-smp #1 SMP Thu Jan 20 11:02:39 JST 2005 i686 GNU/Linux Date: April 9th 2005 Method: <Netinstall, boot cd-rom, swiss mirror with http> Machine: <IBM xServer 206, PN: 8432-3SG> Processor: Pentium 4, 3.2Ghz Memory: 1280Mo Root Device: <SCSI Ibm ServeRaid 7t ( Adaptec 2410s ) 4 Sata ports /dev/sda> Root Size/partition table: # <file system> <mount point> <type> <options> <dump> <pass> <size> proc /proc proc defaults 0 0 /dev/sda5 / jfs defaults,errors=remount-ro 0 1 20Go /dev/sda1 /boot ext3 defaults 0 2 100Mo /dev/sdb1 /home xfs defaults 0 2 250Go /dev/sda6 /var jfs defaults 0 2 57Go /dev/sda2 none swap sw 0 0 2Go /dev/hda /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02) 0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02) 0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02) 0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02) 0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a) 0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02) 0000:02:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet Controller 0000:03:02.0 RAID bus controller: Adaptec AAC-RAID (rev 01) 0000:04:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] lspci -n 0000:00:00.0 0600: 8086:2578 (rev 02) 0000:00:03.0 0604: 8086:257b (rev 02) 0000:00:1c.0 0604: 8086:25ae (rev 02) 0000:00:1d.0 0c03: 8086:25a9 (rev 02) 0000:00:1d.1 0c03: 8086:25aa (rev 02) 0000:00:1d.4 0880: 8086:25ab (rev 02) 0000:00:1d.5 0800: 8086:25ac (rev 02) 0000:00:1d.7 0c03: 8086:25ad (rev 02) 0000:00:1e.0 0604: 8086:244e (rev 0a) 0000:00:1f.0 0601: 8086:25a1 (rev 02) 0000:00:1f.1 0101: 8086:25a2 (rev 02) 0000:00:1f.3 0c05: 8086:25a4 (rev 02) 0000:02:01.0 0200: 8086:1075 0000:03:02.0 0104: 9005:0285 (rev 01) 0000:04:02.0 0300: 1002:5159 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [E] with the linux26 boot Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] with the linux26 error with grub and lilo, ok with 2.4 Reboot: [O] Comments/Problems: Everything working nice (just this problem with the 2.6x initialization mostly i suppose there some crash, with using the wrong drivers in 2.6, you should see the real right module from IBM) During a reinstall, the partitionner should disabled mounting point that are already use. The actual present in netinstall, permit use of 2 or more / :-))) Thanks for your job. -- Bruno Friedmann <bruno@ioda-net.ch> Ioda-Net Sàrl c/o RFV, H. Vauclair SA Rue de l'Avenir 12 2800 Delémont - Switzerland Tél : ++41 32 435 7175 Fax : ++41 32 435 7172 gsm : ++41 78 802 6760 www.ioda-net.ch www.cfcel.com
Attachment:
signature.asc
Description: OpenPGP digital signature