Bug#301478: [sparc][rc3][netinst] installation fails on u1/140
> Is there any chance you could try booting an RC2 CD on this machine as well,
> just for the sake of confirming whether this is a regression? (It probably
> isn't, but the more information we have, the better.)
I tested with the following -
TC1 netinst 2004.06.15 md5 0084e8c472e7a901c503a11648d76a58
daily netinst 2004.10.24 md5 ?
"siloNMU" 2004.10.27 md5 ?
RC2 netinst 2004.11.24 md5 b69043246ee19c5f8a7a40c17b3f497f
daily netinst 2005.03.12 md5 d4f7f8c0969d8bd1c9d51f71296f78b2
RC3 netinst 2005.03.23 md5 95042ee7c74ce5a512ecaba41cea225d
gentoo 2004.3 release (install-sparc64-universal)
No idea where the "siloNMU" disk came from, maybe joshk.
TC1 uses SILO 1.4.5, RC3 uses 1.4.9, the others use 1.4.8
All these failed with the MMU miss, except for RC2. It failed in a
different way.
typical output:
# halt
ok setenv auto-boot? false
ok reset-all
[reboots]
[insert cdrom ]
ok
ok boot cdrom
Boot device: /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f File and
args:
SILO 1.4.8
Fast Data Access MMU miss
ok boot cdrom
[ reboots ]
[ runs memory test ]
Boot device: /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f File and
args:
SILO 1.4.8
Fast Data Access MMU miss
ok reset-all
[give up on that disk]
On RC2, I get this
ok boot cdrom
Boot device: /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f File and
args:
Bad magic number in disk label
Can't open disk label package
Can't open boot device
ok
ok boot cdrom
[ resets, run memory check ]
Boot device: /sbus/espdma@e,8400000/esp@e,8800000/sd@6,0:f File and
args:
Bad magic number in disk label
Can't open disk label package
Can't open boot device
ok
This box is installed with solaris 2.6, so it has a normal sun disklabel.
It's never been installed with anything else, not even a different solaris
version.
More info about the hardware.
Sparc Ultra1 SBUS 143MHz, 128Mb memory, OpenBoot 3.25
Standard sun 17" monitor
Sun Type 5 keyboard
No mouse (hmm, maybe I should...)
probe-scsi-all shows two targets:
0 Seagate ST32430W 2.1G hard disk
6 Matshitacd-rom CR-504-J SS17
I checked on the memory layout, with the 'memconf' script
Sun Ultra 1 SBus (UltraSPARC 143MHz)
socket U0701 has a 64MB DIMM
socket U0601 has a 64MB DIMM
empty sockets: U0702 U0602 U0703 U0603 U0704 U0604
total memory = 128MB
So I think the first sockets are populated (this seems to be necessary
for linux on sparc).
% /usr/platform/SUNW,Ultra-1/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 1 SBus
(UltraSPARC 143MHz)
System clock frequency: 71 MHz
Memory size: 128 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 0 0 143 0.5 US-I 2.2
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- --------------------------------
----------------------
0 SBus 25 2 cgsix SUNW,501-2253
0 SBus 25 14 espdma/esp (scsi)
0 SBus 25 14 ledma/le (network)
0 SBus 25 14 SUNW,bpp
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
---------------
SBus: sbus Rev 1
System PROM revisions:
----------------------
OBP 3.25.0 1999/12/03 11:36 POST 3.10.6 1996/10/18 10:19
Reply to: