Bug#291974: Debian-Installer Report
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-2.6-20041118
Description: debian installation image
uname -a: Linux gnomus 2.6.8-1-386 #1 Thu Nov 25 04:24:08 UTC 2004 i686 GNU/Linux
Date: 2005-01-04 18:51
Method: How did you install?: CDROM LITE-ON LTR-48246S;/dev/hdd
What did you boot off? bios --> CDROM
"Debian GNU/Linux testing _Sarge_ - Official Snapshot i386 Binary-1 (20041225)"
Machine: Desktop mini tower
Processor:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 4
cpu MHz : 3015.554
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni monitor ds_cpl cid
bogomips : 5980.16
Memory:
MemTotal: 516624 kB
MemFree: 225832 kB
Buffers: 25280 kB
Cached: 216840 kB
SwapCached: 0 kB
Active: 169092 kB
Inactive: 80292 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 516624 kB
LowFree: 225832 kB
SwapTotal: 128480 kB
SwapFree: 128480 kB
Dirty: 16 kB
Writeback: 0 kB
Mapped: 8684 kB
Slab: 36468 kB
Committed_AS: 39004 kB
PageTables: 160 kB
VmallocTotal: 516016 kB
VmallocUsed: 3320 kB
VmallocChunk: 511756 kB
Root Device: ST340014A;/dev/hda
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 26200 76200 26% /
df: /dev/ide/host0/bus0/target0/lun0/part17 933361 63583 819979 7% /target
df: /dev/ide/host0/bus0/target0/lun0/part18 1874267 82812 1691452 5% /target/usr
df: /dev/ide/host0/bus0/target0/lun0/part16 233335 51160 169727 23% /target/var
Root Size/partition table:
Feel free to paste the full partition table, with notes on which partitions are mounted where.
Output of lspci :
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 51)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 0003
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
0000:00:0d.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01)
NB: The "Dolphin PCI4027 Ultra high speed serial" was advertized as 16C650 UART 921.6 kbps 32byte fifo
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5940 (rev 01)
NB: the Graphics Accelerator card installed was advertized as Radeon 9200SE,
the manual (Gigabyte GV-R925128T) described it as 9250
(it only runs on vesa driver so far.)
and lspci -n:
0000:00:00.0 0600: 1039:0648 (rev 51)
0000:00:01.0 0604: 1039:0003
0000:00:02.0 0601: 1039:0963 (rev 25)
0000:00:02.1 0c05: 1039:0016
0000:00:02.5 0101: 1039:5513
0000:00:02.7 0401: 1039:7012 (rev a0)
0000:00:03.0 0c03: 1039:7001 (rev 0f)
0000:00:03.1 0c03: 1039:7001 (rev 0f)
0000:00:03.3 0c03: 1039:7002
0000:00:04.0 0200: 1039:0900 (rev 90)
0000:00:0d.0 0700: 1409:7168 (rev 01)
0000:01:00.0 0300: 1002:5960 (rev 01)
0000:01:00.1 0380: 1002:5940 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.>
Would like each package to mail it's "please change ..." to root (unless I missed this option)
Had problems with video card as it was un/incorrectly recognized depending on probe utillity
The 2.6.8.1 kernal detected things better than any of the woody 2.4 kernal installs
and I determined why i486 wouldn't comunicate with Ulta serial card:
it is installed as ttyS14 on this machine not as ttyS3 as manual suggested
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
--
:::::::::::::::::::::::::::::::::::::::::
"Paul" <paje@virtual.net.au>
<http://www.virtual.net.au/~paje>
:::::::::::::::::::::::::::::::::::::::::
Reply to: