Bug#288280: sarge cd install hangs in reboot
I´ve tried to rectify this problem, but
realised I need some further guidance...
I can not find the information I need; when the system
boot, the screen fills to fast to read and then, when
it hangs, the information I´m looking for is gone
above the visible screen.
Also, going to /target/var/log there is no kern.log.
The logs that are available are: auth.log btmp
debian-installer exim4 ksymoops lastlog news syslog
wtmp. I couldn´t find any relevant information from
any of these.
Any suggestions?
Thank you,
Johan
--- Frans Pop <aragorn@tiscali.nl> skrev:
> On Sunday 02 January 2005 21:27, Johan Ebbinghaus
> wrote:
> > Comments/Problems:
> > During reboot the system hangs. This is what can
> be
> > seen on the screen when the boot hangs:
> > -------------------------------------------
> > /etc/rcS.d/S38discover: line 204: 389 segmentation
> > fault modprobe $MODULE
> > usb-uhci disabled in configuration
> > Loading ehci-hcd module.
> > <6>usb.c: registered new driver usbdevfs
> > usb.c: registered new driver hub
> > -------------------------------------------
>
> Just before this point, there should be a line
> listing which module was
> going to be installed.
> Before that, there should also be a line enumerating
> the modules that
> discover is going to try to install (and the
> sequence in which it will do
> this).
> From that you may be able to determine which module
> is causing the
> problems.
>
> Next step is to blacklist these modules in
> /etc/discover/...
> See our FAQ [1] - question 28 - for instructions on
> how to use the
> installer for this. (You can also check
> /target/var/log/kern.log for any
> messages from the failed boot while you're at it.)
>
> Note: you may also have to blacklist the same module
> for hotplug.
>
> Please let us know the results so we can reassign
> this report to the
> kernel.
>
> [1]
> http://wiki.debian.net/index.cgi?DebianInstallerFAQ
>
> Cheers,
> FJP
>
>
Reply to: