[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#288280: sarge cd install hangs in reboot

On Sunday 02 January 2005 21:27, Johan Ebbinghaus wrote:
> Comments/Problems:
> During reboot the system hangs. This is what can be
> seen on the screen when the boot hangs:
> -------------------------------------------
> /etc/rcS.d/S38discover: line 204: 389 segmentation
> fault modprobe $MODULE
> usb-uhci disabled in configuration
> Loading ehci-hcd module.
> <6>usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> -------------------------------------------

Just before this point, there should be a line listing which module was 
going to be installed.
Before that, there should also be a line enumerating the modules that 
discover is going to try to install (and the sequence in which it will do 
From that you may be able to determine which module is causing the 

Next step is to blacklist these modules in /etc/discover/...
See our FAQ [1] - question 28 - for instructions on how to use the 
installer for this. (You can also check /target/var/log/kern.log for any 
messages from the failed boot while you're at it.)

Note: you may also have to blacklist the same module for hotplug.

Please let us know the results so we can reassign this report to the 

[1] http://wiki.debian.net/index.cgi?DebianInstallerFAQ


Reply to: