Bug#283555: INSTALL REPORT
Package: installation-reports
Version: Sarge
INSTALL REPORT
Debian-installer-version: sarge-i386-netinst.iso from 28-Nov-2004 23:10
uname -a: Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux
Date: Mo Nov 29 20:58:15 CET 2004
Method: netinstall from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/;
no Proxy
Machine: TAGRA Visionary 811A 3000+
Processor: Detected 1805.060 MHz processor
Memory: Memory: 511108k/523200k available (1330k kernel code, 11348k
reserved, 726k data, 204k init, 0k highmem)
Root Device: IDE (hda7)
Root Size/partition table:
Disk /dev/hda: 60.0 GB, 60060155904 bytes
255 heads, 63 sectors/track, 7301 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1912 15358108+ 7 HPFS/NTFS
/dev/hda2 1913 6758 38925495 f W95 Ext'd (LBA)
/dev/hda3 6759 7301 4361647+ 1c Hidden W95 FAT32
(LBA)
/dev/hda5 1913 3187 10241406 b W95 FAT32
/dev/hda6 3188 3309 979933+ 82 Linux swap
/dev/hda7 3310 6630 26675901 83 Linux
/dev/hda8 6631 6758 1028128+ b W95 FAT32
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP]
Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800 South]
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus
Controller (rev 01)
0000:00:0c.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus
Reference Card (rev 01)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537
[AC97 Modem] (rev 80)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
0000:00:13.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10]
and lspci -n:
000:00:00.0 0600: 1106:3188 (rev 01)
0000:00:01.0 0604: 1106:b188
0000:00:0a.0 0607: 1524:1410 (rev 01)
0000:00:0c.0 0280: 1814:0201 (rev 01)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:11.6 0780: 1106:3068 (rev 80)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:00:13.0 0c00: 1106:3044 (rev 80)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 1002:4e50
Base System Installation Checklist:
Initial boot worked: [ok]
Configure network HW: [ok]
Config network: [ok]
Detect CD: [ok]
Load installer modules: [ok]
Detect hard drives: [ok]
Partition hard drives: [ok]
Create file systems: [ok]
Mount partitions: [ok]
Install base system: [ok]
Install boot loader: [ok]
Reboot: [ok]
Comments/Problems:
I could not find out any problems during the installation-process.
sarge works fine.
I started the installation-process with linux26 and installed the
packages: x-window-system, kde, kdm, gnome, apach, php and mysql and
some others.
Only two little things I noticed:
The installer could not find automaticly the proper frequency and
resolution for the LCC.
And I hade no idea wich package I had to install or wich module I hade
to load for a proper working touchpade.
thanx for all. M.W.
Reply to: