Bug#283547: INSTALL REPORT
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://http.us.debian.org/debian/dists/testing/main/installer-sparc/current/images/sparc32/netboot/2.6/boot.img
uname -a: Linux sparc4.homeunix.net 2.6.8-1-sparc32 #1 Sun Oct 17
18:03:22 EDT 2004 sparc GNU/Linux
Date: Nov 28 2004
Method:
How did you install? rarpd/tftpd running on i386 debiain
What did you boot off? rarpd/tftpd running on i386 debiain
If network install, from where? ftp.funet.fi
Proxied? no
Machine: sparcstation4
Processor: Fujitsu MB86904
Memory: 64M
Root Device:
SCSI subsystem initialized
esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167
NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
Vendor: SEAGATE Model: ST39173WC Rev: 5698
Type: Direct-Access ANSI SCSI revision: 02
esp0: target 3 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target3/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 3, lun 0
Root Size/partition table:
sparc4:~# fdisk -l
Disk /dev/sda (Sun disk label): 64 heads, 32 sectors, 8683 cylinders
Units = cylinders of 2048 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sda1 0 95 97280 1 Boot
/dev/sda2 95 8517 8624128 83 Linux native
/dev/sda3 0 8683 8891392 5 Whole disk
/dev/sda4 8517 8683 169984 82 Linux swap
sparc4:~# mount | grep sda
/dev/sda2 on / type ext3 (rw,errors=remount-ro)
/dev/sda1 on /boot type ext3 (rw)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
console was in black&white mode during installation and the menus were
unusable
since you couldn't see what item you had selected in the list.
Reply to: