Bug#283286: ASUS AP140R-E1
Package: installation-reports
INSTALL REPORT
Debian-installer-version: RC2 from cd.debian.org
uname -a: Linux neoduik 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux
Date: Sat, 27 Nov 2004 14:42:28 +0100
Method: from CD-rom, apt stuff by HTTP, not proxied.
Machine: ASUS AP140R-E1, 1U Rackmount server
Processor: Intel Pentium 4
Memory: 1G
Root Device: SATA harddisk
Root Size/partition table:
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 34 273073+ 83 Linux
/dev/sda2 35 2802 22233960 5 Extended
/dev/sda3 2803 24321 172851367+ 83 Linux
/dev/sda5 35 642 4883728+ 83 Linux
/dev/sda6 643 1007 2931831 83 Linux
/dev/sda7 1008 1335 2634628+ 82 Linux swap
/dev/sda8 1336 1343 64228+ 83 Linux
/dev/sda9 1344 2802 11719386 83 Linux
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 255912 63764 178495 27% /
tmpfs 453368 8 453360 1% /dev/shm
/dev/sda3 170138780 32860 161463352 1% /data
/dev/sda5 4807056 144180 4418692 4% /usr
/dev/sda6 2885780 84444 2654748 4% /var
/dev/sda8 60185 4142 52832 8% /tmp
/dev/sda9 11535344 32880 10916496 1% /home
Output of `(lspci ; lspci -n) | sort -n`:
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
0000:00:03.0 0604: 8086:257b (rev 02)
0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02)
0000:00:1c.0 0604: 8086:25ae (rev 02)
0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02)
0000:00:1d.0 0c03: 8086:25a9 (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.1 0c03: 8086:25aa (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02)
0000:00:1d.4 0880: 8086:25ab (rev 02)
0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02)
0000:00:1d.5 0800: 8086:25ac (rev 02)
0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02)
0000:00:1d.7 0c03: 8086:25ad (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 0a)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a)
0000:00:1f.0 0601: 8086:25a1 (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
0000:00:1f.1 0101: 8086:25a2 (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02)
0000:00:1f.2 0104: 8086:25b0 (rev 02)
0000:00:1f.2 RAID bus controller: Intel Corp. 6300ESB SATA RAID Controller (rev 02)
0000:00:1f.3 0c05: 8086:25a4 (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
0000:01:01.0 0200: 8086:1075
0000:01:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet Controller
0000:02:03.0 0200: 10b7:9200 (rev 74)
0000:02:03.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
0000:03:03.0 0300: 1002:4752 (rev 27)
0000:03:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:03:05.0 0200: 8086:1076
0000:03:05.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E/O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E/O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E/O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
It is the 2.6 kernel that has a driver for the disk controller.
(booting with 'linux26' is the trick to detect hard drives)
The computer has several NICs, only had a cable connected during install.
To let debian-installer selecting the right NIC, I appended
"netcfg/choose_interface=auto", but then d-i failed on
configuring the device 'auto'.
(not appending what I see in the preseeding example
and manual selecting the NIC works fine)
I got "no space left on device" during the install of the kernel.
First not being able to see which device was full, it turned
out that I choose the /tmp partition too small...
At the end an installed computer :-)
Cheers
Geert Stappers
Reply to: