[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#282402: Installation Report

Package: installation-reports


Debian-installer-version: rc1, August 01 16:39 
uname -a: Linux headstrong 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i586 
Date: 21-November-2004 14:30 EST
Method: How did you install?  What did you boot off?  If network
      install, from where?  Proxied? pxeboot from already installed
      Debian testing system, no proxy, network install from

Machine: Compaq Deskpro 4000s 5233MMX
Processor: Pentium 233MMX
Memory: 256MB
Root Device: IDE Maxtor 51536U3
Root Size/partition table: root size 512MB

major minor #blocks  name
3 0 15007608 hda
3 1 15000048 hda1 (PV for LVM)
3 3 7528  hda3 (Compaq Diagnostics partiton)
254 0 512000  dm-0 (/)
254 1 3145728  dm-1 (/usr)
254 2 5242880  dm-2 (/var)
254 3 4194304  dm-3 (/home)
254 4 860160  dm-4 (swap)
254 5 1044480  dm-5 (/tmp)

Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C595/97 [Apollo VP2/97] 
(rev 06)
0000:00:0f.0 VGA compatible controller: S3 Inc. 86c775/86c785 [Trio 64V2/DX 
or /GX] (rev 16)
0000:00:10.0 Network controller: Compaq Computer Corporation Netelligent 
10/100 TX Embedded UTP (rev 10)
0000:00:14.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA 
[Apollo VP] (rev 41)
0000:00:14.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:14.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 02)
0000:00:14.3 Non-VGA unclassified device: VIA Technologies, Inc. VT82C586B 
ACPI (rev 10)

0000:00:00.0 0600: 1106:1595 (rev 06)
0000:00:0f.0 0300: 5333:8901 (rev 16)
0000:00:10.0 0280: 0e11:b011 (rev 10)
0000:00:14.0 0601: 1106:0586 (rev 41)
0000:00:14.1 0101: 1106:0571 (rev 06)
0000:00:14.2 0c03: 1106:3038 (rev 02)
0000:00:14.3 0000: 1106:3040 (rev 10)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [E]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]


Maybe I'm not understanding the point of pxebooting, but the initrd
included in pxeboot.tar.gz doesn't include any ide or lvm modules.
I downloaded kernel-image-2.6.7-1-386_2.6.7-2_i386.deb from the archive,
unpacked it, and copied over ide-core.ko, ide-disk.ko, ide-generic.ko,
ide-pnp.ko, and all of the md directory.  I was really using this
install to teach myself how to set up pxe.  The install itself went very
smoothly.  Thank you for the effort put into this high-quality system!

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

Reply to: