Bug#280845: Debian Installation Report
Package: installation-reports
Debian-installer-version: Obtained on 9 Nov 2004 from
http://www.debian.org/devel/debian-installer/
Full URL downloaded:
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso
uname -a: Linux toshi 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i686
GNU/Linux
Date: 9 Nov 2004, 1700 EST
Method: Booted off netinst debian-installer CD/sarge pre-rc2;
subsequent network install from ftp.debian.org; no proxy
Machine: Toshiba Tecra M2 laptop
Processor: Pentium Centrino 1.6 GHz
Memory: 1024 MB
Root Device: IDE - hda2
Root Size/partition table:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda2 / ext3 defaults,errors=remount-ro 0
1
/dev/hda5 /windows vfat rw,umask=0000 0 2
/dev/hda3 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O
Controller (rev 21)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller
(rev 21)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA
Storage Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34M
[GeForce FX Go 5200] (rev a1)
0000:02:05.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev
05)
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (MOB)
Ethernet Controller (rev 83)
0000:02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to
Cardbus Bridge with ZV Support (rev 32)
0000:02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to
Cardbus Bridge with ZV Support (rev 32)
0000:02:0d.0 System peripheral: Toshiba America Info Systems SD TypA
Controller (rev 03)
lspci -n
0000:00:00.0 0600: 8086:3340 (rev 21)
0000:00:01.0 0604: 8086:3341 (rev 21)
0000:00:1d.0 0c03: 8086:24c2 (rev 03)
0000:00:1d.1 0c03: 8086:24c4 (rev 03)
0000:00:1d.2 0c03: 8086:24c7 (rev 03)
0000:00:1d.7 0c03: 8086:24cd (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev 83)
0000:00:1f.0 0601: 8086:24cc (rev 03)
0000:00:1f.1 0101: 8086:24ca (rev 03)
0000:00:1f.5 0401: 8086:24c5 (rev 03)
0000:00:1f.6 0703: 8086:24c6 (rev 03)
0000:01:00.0 0300: 10de:0328 (rev a1)
0000:02:05.0 0280: 8086:4220 (rev 05)
0000:02:08.0 0200: 8086:103d (rev 83)
0000:02:0b.0 0607: 1179:0617 (rev 32)
0000:02:0b.1 0607: 1179:0617 (rev 32)
0000:02:0d.0 0880: 1179:0805 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [ ] (used partition magic prior... didn't create
fs)
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Installed with options "linux26"
Noted the "red screen" bug noted in the Errata
First boot ran fsck (on ext3) and forced reboot
Second boot successful - taken to Debian base system configuration
Connection successful to http://debian.oregonstate.edu/ (35kb/s)
Subsequent attempts to "Configure apt" are unsuccessful (it says
"testing apt sources... http://debian.oregonstate.edu/...
http://debian.oregonstate.edu/... and returns to the system config
screen)
Re-run apt-setup - picked ftp.debian.org (250kb/s)
re-run base-config - selected desktop system
I do get a message on boot about backup superblock being
invalid--possible result of partition magic
System running well--love it!
Reply to: