Bug#278392: installation-reports: CD-rom not detected after installation - no ide module in /etc/modules
Package: installation-reports
Severity: normal
Debian-installer-version: Oct 13 i386 net installer cd
uname -a: Linux parus 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i686 GNU/Linux
Date: 2004-10-15
Method: net installer cd
Machine: Shuttle SN85G4V2
Processor: AMD64
Memory: 1Gig
Root Device: Seagate 200 GB serial ATA
Root Size/partition table: irrelevant
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev
a4)
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
0000:00:05.0 Ethernet controller: nVidia Corporation nForce3 Ethernet
(rev a5)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3
Audio (rev a2)
0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
0000:01:07.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev
01)
0000:02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce
FX 5200] (rev a1)
0000:00:00.0 0600: 10de:00d1 (rev a4)
0000:00:01.0 0601: 10de:00d0 (rev a6)
0000:00:01.1 0c05: 10de:00d4 (rev a4)
0000:00:02.0 0c03: 10de:00d7 (rev a5)
0000:00:02.1 0c03: 10de:00d7 (rev a5)
0000:00:02.2 0c03: 10de:00d8 (rev a2)
0000:00:05.0 0200: 10de:00d6 (rev a5)
0000:00:06.0 0401: 10de:00da (rev a2)
0000:00:08.0 0101: 10de:00d5 (rev a5)
0000:00:0a.0 0604: 10de:00dd (rev a2)
0000:00:0b.0 0604: 10de:00d2 (rev a4)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:06.0 0c00: 1106:3044 (rev 80)
0000:01:07.0 0104: 1095:3512 (rev 01)
0000:02:00.0 0300: 10de:0322 (rev a1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
1 problem: The installed OS was unable to detect the CD rom. I was able to fix
this by adding 'ide-generic' to /etc/modules.
I did a basic sarge install before upgrading to sid, which is what I run
on my other 3 Debian machines.
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-1-386
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Reply to: