Bug#274459: installation report
uname -a: Linux talibox 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i586
Date: Fri Sep 30 19:30:00 GMT-2 2004
I used the boot and root floppies. Net install (http) from another
machine in the local network with sarge-i386-netinst.iso mounted via
loop and served by Apache. No proxy.
Machine: generic computer
Processor: Pentium 75mhz
Root Device: NA
Root Size/partition table: NA
Output of lspci and lspci -n: lspci is not present in the d-i shell.
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: 
Configure network HW: 
Config network: 
Detect CD: 
Load installer modules: 
Detect hard drives: [E]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
The packages were downloaded from the remote netinstall iso via http and
were uncompressed ok.
The "Partition disks" stage fails with the message:
No partitionable media were found. Please check that a hard disk is
attached to this machine.
I found only the following IDE information:
Uniform Multi-Platform E-IDE driver REvision: 7.00beta4-2.4
Assuming 33Mhz system bus speed for PIO modes; override with idebus=xx
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 430FX - 82437FX TSC [Triton I] (rev 2).
Master Capable. Latency=32
Bus 0, device 7, function 0:
ISA bridge: Intel Corp. 82437FX PIIX ISA [Triton I] (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corp. 82371FB PIIX IDE [Triton I] (rev 2).
Master Capable. Latency=32.
I/O at 0x3000 [0x300f].
ide0 and ide1 not present in /proc/interrupts
/proc/ide has only one file "drivers" containing: ide-default version
Marcelo Ramos | \/ __ |
Fedora Core 2 | Linux 22.214.171.124 | |_/ /
Socio UYLUG Nro 125 | \
Linux registered user #118109 |____|\/|____|\______\