Bug#264632: debian-installer: report on laptop HP nc6000
Package: installation-reports
Debian-installer-version: 2004-08-07 around 15:00 CEST netinst from
cdimage.debian.org/cdimage-testing/daily/i386
uname -a: Linux phonic 2.6.7-1-686 #1 Thu Jul 8 05:36:53 EDT 2004 i686
GNU/Linux
Date: 2004-08-07 around 15:30 CEST
Method: booted from netinst CD. No proxy
Machine: HP/Compaq nc6000
Processor:
vendor_id : GenuineIntel
cpu family : 6
model : 9
model name : Intel(R) Pentium(R) M processor 1600MHz
stepping : 5
cpu MHz : 1395.698
cache size : 1024 KB
Memory: 512 MB
Root Device: /dev/hda4
Root Size/partition table: Partition Table for /dev/hda
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
1 0x80 1 1 0 0x07 254 63 1023 63 62332137
2 0x00 254 63 1023 0x82 254 63 1023 62332200 2056320
3 0x00 254 63 1023 0x83 254 63 1023 64388520 192780
4 0x00 254 63 1023 0x83 254 63 1023 64581300 52628940
hda1 is WinXP (ntfs), hda2 is swap, hda3 is /boot (ext3), hda4 is /
(xfs)
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller
(rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-
L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-
L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-
L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA
Storage Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10]
0000:02:04.0 Ethernet controller: Atheros Communications, Inc. AR5212
802.11abg NIC (rev 01)
0000:02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus
MultiMediaBay Controller
0000:02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus
MultiMediaBay Controller
0000:02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay
Accelerator
0000:02:06.3 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus
MultiMediaBay Controller
0000:02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5705M_2 Gigabit Ethernet (rev 03)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [E]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I installed using the kernel 2.6 option.
Since this laptop initially had windows on the whole disk, I had to
resize. To do so, I used the SuSE installer. Therefore, i didn't have to
do the partitioning in d-i.
The module tg3 supports the Broadcom NetXtreme BCM5705M_2 Gigabit NIC,
but it was not loaded automatically. Once selected manually from the
module list which d-i showed me ("module could not be loaded"), it
worked immediately.
I selected packages in bulk, using "Desktop computer"
X was configured, using the ati driver, but I was never asked about the
screen resolution I want. So I ended up with 800x600, although the LCD
supports 1024x768. I had to change that afterwards.
While using the installation kernel, X started. (after switching to
2.6.7-1-686, I had to load psmouse in /etc/modules)
Alsa did not work, but using oss output worked. To get alsa going, I had
to load snd-intel8x0 in /etc/modules
For WLAN, the wavelan_cs module was loaded, but didn't work. I have to
use madwifi.
ACPI: kernel says that it supports supports S0 S3 S4 S4bios S5, but so
far no luck with going to suspend or standby. Some buttons work (volume,
display brightness, )
2 Battery Slots, AC Adapter, Power Button, Sleep Button, Lid Switch,
Fan, and Thermal Zone are reported
USB: out of the box
Reply to: