Bug#260449: Package: installation-reports
Package: installation-reports
INSTALL REPORT
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
uname -a: uname -a: Linux ledzep 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux
Date: 19/07/2004 - 18h
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
Boot from installer CD, network install, mirror ftp://ftp.pucpr.br, proxy on
Machine: Compaq Armada E500
Processor: Pentium III 600MHz
Memory: 128MB
Root Device: IDE, IBM Travelstar 5GB
Root Size/partition table:
proc /proc proc defaults 0 0
/dev/hda2 none swap sw 0 0
/dev/hda3 / reiserfs defaults 0 1
/dev/hdb /media/cdrom iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy auto rw,user,noauto 0 0
/dev/hdb /cdrom iso9660 ro,user,noauto 0 0
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
0000:00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09)
0000:00:09.1 Serial controller: Lucent Microelectronics LT WinModem
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
lspci -n:
0000:00:00.0 Class 0600: 8086:7190 (rev 03)
0000:00:01.0 Class 0604: 8086:7191 (rev 03)
0000:00:04.0 Class 0607: 104c:ac1c (rev 01)
0000:00:04.1 Class 0607: 104c:ac1c (rev 01)
0000:00:07.0 Class 0680: 8086:7110 (rev 02)
0000:00:07.1 Class 0101: 8086:7111 (rev 01)
0000:00:07.2 Class 0c03: 8086:7112 (rev 01)
0000:00:07.3 Class 0680: 8086:7113 (rev 03)
0000:00:08.0 Class 0401: 125d:1978 (rev 10)
0000:00:09.0 Class 0200: 8086:1229 (rev 09)
0000:00:09.1 Class 0700: 11c1:0445
0000:01:00.0 Class 0300: 1002:4c4d (rev 64)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [E] - Windows partition not mounted
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
- In general, a very good installation, found almost any hardware, including
sound and video.
- I don't know why two entries were included in fstab for the cdrom.
- Network detection ok, including DHCP configuration.
- Didn't test advanced power management, infrared devices,
PCMCIA and modem.
- Problems with Brazilian keyboard (abnt2 model): one key changed, one doesn't
work
- Synaptics touch pad required further install of apropriated
package.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: