Bug#246705: marked as done (Network driver stops autoloading after install)
Your message dated Mon, 3 May 2004 20:01:45 -0400
with message-id <20040504000145.GA23677@kitenet.net>
and subject line fixed
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--------------------------------------
Received: (at submit) by bugs.debian.org; 22 Apr 2004 03:27:52 +0000
>From bruno@pubnix.qc.ca Wed Apr 21 20:27:52 2004
Return-path: <bruno@pubnix.qc.ca>
Received: from tomts20.bellnexxia.net (tomts20-srv.bellnexxia.net) [209.226.175.74]
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1BGUsS-0000zM-00; Wed, 21 Apr 2004 20:27:52 -0700
Received: from THINKBOX8.pubnix.qc.ca ([64.230.18.153])
by tomts20-srv.bellnexxia.net
(InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with ESMTP
id <20040422032739.PRCB15811.tomts20-srv.bellnexxia.net@THINKBOX8.pubnix.qc.ca>
for <submit@bugs.debian.org>; Wed, 21 Apr 2004 23:27:39 -0400
Message-Id: <5.1.0.14.2.20040421232051.025817a8@POP2.sympatico.ca>
X-Sender: b1ftad75@POP2.sympatico.ca
X-Mailer: QUALCOMM Windows Eudora Version 5.1
Date: Wed, 21 Apr 2004 23:27:03 -0400
To: submit@bugs.debian.org
From: Bruno Majewski <bruno@pubnix.qc.ca>
Subject: installation report (d-i 20040421)
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Delivered-To: submit@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2004_03_25
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-7.0 required=4.0 tests=BAYES_00,HAS_PACKAGE
autolearn=no version=2.60-bugs.debian.org_2004_03_25
X-Spam-Level:
X-CrossAssassin-Score: 1
Package: installation-reports
Debian-installer-version: 2004.04.21
gluck.debian.org/cdimage/testing/daily/i386
uname -a:
Linux debtst7 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686
GNU/Linux
Date: 2004.04.21
Method:
Using the Sarge netinst ISO image downloaded from
http://gluck.debian.org/cdimage/testing/daily/i386/20040421/
Machine:
x86 "wintel" clone: Gigabyte GA-7VT600-P-L motherboard, plus
ASUS Radeon 9200SE AGP 64MB video card.
The built-in SATA controller was not turned off.
Processor:
Duron 1.4 GHz, 266MHz FSB.
Memory:
256MB RAM DDR (PC3200)
Root Device:
EIDE (1 HD)
WDC WD400EB-00CPF0
Root Size/partition table:
Command (m for help): p
Disk /dev/hda: 40.0 GB, 40019582464 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 1304 10474348+ c W95 FAT32
(LBA)
/dev/hda2 1305 1368 514080 82 Linux swap
/dev/hda3 * 1369 4865 28089652+ 83 Linux
Command (m for help): q
Output of lspci:
*** START ***
lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:0a.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871
(rev 03)
0000:00:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
0000:00:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device
3149 (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800
South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon
9200 SE] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200
SE] (Secondary) (rev 01)
-----
lspci -n:
0000:00:00.0 Class 0600: 1106:3189 (rev 80)
0000:00:01.0 Class 0604: 1106:b198
0000:00:0a.0 Class 0100: 9004:7178 (rev 03)
0000:00:0c.0 Class 0400: 109e:036e (rev 11)
0000:00:0c.1 Class 0480: 109e:0878 (rev 11)
0000:00:0f.0 Class 0104: 1106:3149 (rev 80)
0000:00:0f.1 Class 0101: 1106:0571 (rev 06)
0000:00:10.0 Class 0c03: 1106:3038 (rev 81)
0000:00:10.1 Class 0c03: 1106:3038 (rev 81)
0000:00:10.2 Class 0c03: 1106:3038 (rev 81)
0000:00:10.3 Class 0c03: 1106:3038 (rev 81)
0000:00:10.4 Class 0c03: 1106:3104 (rev 86)
0000:00:11.0 Class 0601: 1106:3227
0000:00:11.5 Class 0401: 1106:3059 (rev 60)
0000:00:13.0 Class 0200: 10ec:8139 (rev 10)
0000:01:00.0 Class 0300: 1002:5964 (rev 01)
0000:01:00.1 Class 0380: 1002:5d44 (rev 01)
*** END ***
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [E]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
* During install, while the base system was being copied/installed, I
switched to
another virtual console to see what modules were loaded. I re-did the check
after the
first reboot (between base system install and system post-install
configuration).
While I knew the network hw had been detected and configured via dhcp right
from the bat,
the sound hardware was not. This is a regression from installer 20040408,
where both the
nic and sound hw were detected.
* Actually, while the built-in NIC (matching module: 8139too) was
loaded and
properly configured (DHCP) during the first stage of the install, once the
system has been
rebooted, I saw that the nic's modules were no longer configured nor even
loaded.
The file /etc/modules contained no entries for the built-in nic, the
built-in audio
or even the system's tvcard. (The tvcard issue was already reported in bug
report
#243233.) It is like if the installer forgot to write to /etc/modules
after detecting the hw.
* This motherboard (and another used, see below) is "apm capable",
i.e. apmd
_can_ fully shut down the machine. Yet the installer did not notice that
and did not try
to load apmd. It should.
* There are other issues (usability of manual partition, etc.), but
right now
the bigger issue is to get all the hardware recognized and all the required
drivers/kernel
modules loaded in a "persistent" fashion (survives a reboot). There has
been clear
regression in that dept. since d-i 20040408.
* These issues also occured on a machine using a Gigabyte 7VAXP (uses
a VIA KT400).
Such a motherboard uses the same NIC & sound kernel modules. It has the
same video card
(ASUS Radeon 9200SE 64MB AGP).
Bruno Majewski
bruno@pubnix.qc.ca
---------------------------------------
Received: (at 245452-done) by bugs.debian.org; 4 May 2004 00:03:02 +0000
>From joey@kitenet.net Mon May 03 17:03:02 2004
Return-path: <joey@kitenet.net>
Received: from kitenet.net [64.62.161.42] (postfix)
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1BKnOo-0003DX-00; Mon, 03 May 2004 17:03:02 -0700
Received: from dragon.kitenet.net (216-98-94-198.access.naxs.com [216.98.94.198])
(using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits))
(Client CN "Joey Hess", Issuer "Joey Hess" (verified OK))
by kitenet.net (Postfix) with ESMTP id 5533618191
for <245452-done@bugs.debian.org>; Tue, 4 May 2004 00:03:01 +0000 (GMT)
Received: by dragon.kitenet.net (Postfix, from userid 1000)
id EB6436E733; Mon, 3 May 2004 20:01:45 -0400 (EDT)
Date: Mon, 3 May 2004 20:01:45 -0400
From: Joey Hess <joeyh@debian.org>
To: 245452-done@bugs.debian.org
Subject: fixed
Message-ID: <20040504000145.GA23677@kitenet.net>
Mime-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha1;
protocol="application/pgp-signature"; boundary="r5Pyd7+fXNt84Ff3"
Content-Disposition: inline
User-Agent: Mutt/1.5.5.1+cvs20040105i
Delivered-To: 245452-done@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2004_03_25
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-2.0 required=4.0 tests=BAYES_00 autolearn=no
version=2.60-bugs.debian.org_2004_03_25
X-Spam-Level:
X-CrossAssassin-Score: 1
--r5Pyd7+fXNt84Ff3
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
This was transient breakage in testing; a bad discover/discover-data
combination failed to detect any hardware. It is now fixed, we recommend
you apt-get install discover1 to fix it. Or, try a new installation with
beta4 of the debian-installer.
--=20
see shy jo
--r5Pyd7+fXNt84Ff3
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: Digital signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAlt1pd8HHehbQuO8RArCZAKCXJGP2iyiQpkVWABe9hKi8VaeddwCggAO1
9JVM+BK6lMhN0b8wOSrItMo=
=SVNL
-----END PGP SIGNATURE-----
--r5Pyd7+fXNt84Ff3--
Reply to: