[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#231402: installation-reports

Package: installation-reports

Debian-installer-version: http://gluck.debian.org/cdimage/testing/netinst/i386/20040205/sarge-i386-netinst.iso uname -a: Linux beep 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 unknown
Date: 6 Feb 2004 12:30
Method: normal cdrom

Machine: <Description of machine (eg, IBM Thinkpad R32)>
Processor: athlon xp 2200+
Memory: 512mb ddr
Root Device: /dev/ida / /dev/ide/host0/bus0/target0/lun0/disc
Root Size/partition table:
disc1 primary ntfs 41940.71mb
disc5 logical ntfs 41940.71mb
disc3 primary linux 1003.49mb
disc6 logical linux 6999.72mb
disc7 logical linux 1998.75mb
disc8 logical linux 8003.20mb
disc9 logical swap 509.97mb
free 20538.53mb
Output of lspci:
via tECHNOLOGIES, inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PI PC Bus Master IDE (rev 6)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [E]
Mount partitions:       [E]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Unable to configure and mount partitions:
The hdd is a normal maxtor 120gb IDE hdd. The partitions are pre-partitioned - installing over another distribution. Parition a hard drive (cfdisk) detected all of them and showed them as "Linux ReiserFS", but when going to configure and mount partitions it errors: "No partitions found".

Reply to: