Bug#225793: INSTALL REPORT
Package: installation-reports
Version: unknown
INSTALL REPORT
Debian-installer-version:
http://people.debian.org/~manty/testing/netinst/powerpc/daily/sarge-powerpc-netinst.iso
31 December 2003
uname -a: Linux (none) 2.4.22-powerpc #1 Lun dACc 15 15:03:39 CET 2003 ppc unknown
Date: 1 January 2004
Method: from cd, no proxy
Machine: Powermac
Processor: G4 1.33 Mhz
Memory: 512 Mbyte
Root Device: IDE Hitachi HTS548080M9AT00/ 76319MB
Root Size/partition table:
sorry, I don't know how to copy it
/dev/ide/host0/bus0/target0/part1 Apple_partition_map
/dev/ide/host0/bus0/target0/part2 Apple_Boot
/dev/ide/host0/bus0/target0/part3 Apple_UNIX_SRV2 Linux 60798080 @ 17472 (29.0G) Linux Native
....
part3 mounted on /
Output of lspci:
/bin/sh: lspci: not found
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Missing modules: ide-scsi, usb-storage (I try to continue)
Selected "chose mirror to install from" in installer modules list
(I try some other time without selecting a mirror whith
http://people.debian.org/~manty/testing/netinst/powerpc/sarge-powerpc-netinst.iso
file date: 30 December 2003 and installer fails,
deboostrap.log reports that it "cannot find lcq").
Selectd mirror http://ftp.it.debian.org
(how can i test if the installer uses the network connection?)
I can see (tail -f /target/var/log/debootstrap.log ) a relevant number
of dependency problems during install, but i don't have a
floppy disk on the powerbook. What can I do to send to you
a copy of that file?
debootstrap.err.log is empty
The last error is: "/usr/sbin/debootstrap: 1: sleep: not found"
But in /target/bin/ there is a file named "sleep"
I do a integrity test on CD, the result is an error in
/dists/sarge/main/binary-powerpc/Release
If I continue (restarting from base system install) it fails with the error:
"ln: /target/usr/bin/awk: File exists"
I'm pleased to do more installation test.
Thanks a lot
Edoardo Panfili
Reply to: