Bug#224398: (no subject)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: sarge-i386-netinst.iso from
rw-aachen.de/sebastian.ley/d-i (downloaded after compromise, circa 12 Dec)
uname -a: Linux localhost 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686
GNU/Linux
(why is the hostname not properly set? I set it during the base config,
yet my prompt is "localhost:~")
Date: 18 Dec 2003 14:24 GMT
Method: burned iso onto bootable CD and installed from there
Machine: home-made Asus P2B-LS rev 1.2 (slot 1)
Processor: Intel Celeron 500MHz (Mendocino core, socket 370 on no-name
plug-in card)
Memory: 392Mb SDRAM (1x256Mb PC133, 1x128 PC100)
Root Device: sdb8 (2Gb)
Root Size/partition table: two identical Quantum Atlas IV 9Gb HDs
sda 9105Mb (1106/255/63) -
sda1 3068Mb (1-382 cyl) NTFS (WinXP boot)
sda2 5807Mb (383-1105 cyl) Extended
sda5 3068Mb (383-764 cyl) NTFS
free space (inside Extended partition) 765-1105 cyl
sdb 9105Mb (1106/255/63) -
sdb1 490Mb (1-61 cyl) unused (destined for DOS6.22)
sdb2 6345Mb (62-851 cyl) Extended
sdb5 1951Mb (62-304 cyl) unused (probably FAT16 for shared space)
sdb6 1951Mb (305-547 cyl) unused
sdb7 490Mb (548-608 cyl) swap
sdb8 1951Mb (609-851 cyl) ext2 (/)
free space (outside Extended partition) 852-1105 cyl
Output of lspci:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:06.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891
00:07.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 03)
00:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV4 [RIVA TNT] (rev 04)
Base System Installation Checklist:
Initial boot worked: [ok]
Configure network HW: [ok]
Config network: [E] *1
Detect CD: [ok]
Load installer modules: [ok]
Detect hard drives: [ok]
Partition hard drives: [ok]
Create file systems: [ok]
Mount partitions: [ok]
Install base system: [ok]
Install boot loader: [E] *2
Reboot: [ok]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
*1 You already know it was a bad idea to default to DHCP. The manual net
config was fine.
*2 The boot loader install defaults to the disk containing /, not the
"first" hard disk (which will be booted). Having not noticed this, I was
then unable to use the installer CD as a rescue disk, to mount my sdb8
filesystem and re-run LILO. Is this intentional or did I miss something?
I tried several variations of "linux root=/dev/sdb8" (including
root=/dev/scsi/host0/bus0/target1/lun0/part8) and nothing worked, so I had
to re-run the entire install. This strikes me as a bit unnecessary, given
that the install had worked and it was simply a typo which caused LILO to
install on the wrong disk. Also, LILO does not scan for windoze partitions
and install a default "other" image, which it did in previous versions.
Anyway, congratulations on a working installer (I tried an alpha version a
month or two ago and it failed on both machines - this one because I have
no IDE HDs and the other one because it lacked SiI3112 support). This is
my 2nd install report - the first install is still in progress
(downloading 424Mb of packages), so I'll send that report when it's
finished.
Regards,
CC
Reply to: