Bug#129940: boot-floppies: S/390 (hercules): Can't find CTC adapter

[Jochen Hein <jochen@jochen.org>]

>>>>> "Stefan" == Stefan Gybas <gybas@trustsec.de> writes:

 Stefan> Jochen Hein wrote:
 >> No CTC or ESCON connections were detected. Please make sure that
 >> you have set them up correctly or chose a differnt network driver:

 Stefan> Could you send me (or debian-s390) the output of "cat
 Stefan> /proc/chandev"?

cat /proc/chandev
chan_type key bitfield ctc=0x1,escon=0x2,lcs=0x4,osad=0x8,qeth=0x10,claw=0x20
*'s for cu/dev type/models indicate don't cares
cautious_auto_detect: on
persist = 0x00
use_devno_names: off
Channels enabled for detection
  chan     cu      cu     dev   dev    max     checksum  use hw  auto recovery
  type    type    model  type  model  port_no. received   stats      type
  ==============================================================================
  0x02   0x3088   0x1e      *        *     0 no      no      not_operational,no_
path,revalidate,device_gone
  0x20   0x3088   0x61      *        *     0 no      no      not_operational,no_
path,revalidate,device_gone                                                    
  0x08   0x3088   0x62      *        *     0 no      no      not_operational,no_
path,revalidate,device_gone
  0x10   0x1731   0x05   0x1732   0x05    0 no      no      not_operational,no_p
ath,revalidate,device_gone
  0x10   0x1731   0x01   0x1732   0x01    0 no      no      not_operational,no_p
ath,revalidate,device_gone
  0x04   0x3088   0x60      *        *     1 no      no      not_operational,no_
path,revalidate,device_gone
  0x06   0x3088   0x1f      *        *    15 no      no      not_operational,no_
path,revalidate,device_gone
  0x05   0x3088   0x08      *        *    15 no      no      not_operational,no_
path,revalidate,device_gone
  0x04   0x3088   0x01      *        *    15 no      no      not_operational,no_
path,revalidate,device_gone
channels detected
              chan    cu    cu   dev    dev                          in chandev
  irq  devno  type   type  model type  model pim      chpids         use  reg.
===============================================================================
0x000a 0x0400 0x05  0x3088 0x08  0x3088 0x01 0x80 0x0400000000000000  no   no
0x000b 0x0401 0x05  0x3088 0x08  0x3088 0x01 0x80 0x0400000000000000  no   no


 Stefan> What happens if you
 Stefan> select "0 (no network)" and manually do "insmod ctc"?

The module is loaded, but no ctc0 available to ifconfig.

Kernel-Messages when loading ctc.o:
CTC driver Version: 1.55 with CHANDEV support initialized

# cat /proc/devices
Character devices:
  1 mem
  2 pty/m%d
  3 pty/s%d
  4 ttyS
  5 ptmx
 10 misc
 43 ctc/ctctty%d
128 ptm
136 pts/%d
162 raw
227 tty3270
228 fs3270
Block devices:
  1 ramdisk
 94 dasd

# ifconfig ctc0
ctc0: error fetching interface information: Device not found

Jochen

-- 
#include <~/.signature>: permission denied