[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problem installing Potato on an Amiga 1200



Christian T. Steigies:

> it usually gives you some information on the third(?) console. what does it
> day?

It doesn't give any errors.

> Did you set the partition types to linux and swap? Can you show us the
> kernel boot log or fdisk -l /dev/hda ?

fdisk -l /dev/hda:

===[ cut ]===
Disk /dev/hda: 16 heads, 17471 sectors, 18613 cylinders, RDB: 3
Logical Cylinders from 1 to 22364, 143122432  bytes/Cylinder

   Device  Boot Mount   Begin      End     Size   Pri  BBlks    System
/dev/hda1    *    *         1     3667   205352     3      0  Amiga FFS
/dev/hda2         *      3668    21193   981456     0      0  Linux native
/dev/hda3         *     21194    22364    65576     0      0  Linux swap
===[ cut ]===

dmesg:

===[ cut ]===
Linux version 2.2.10 (root@aahz) (gcc version 2.7.2.3) #1 Mon Nov 27 20:50:14 CET 2000
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO
Console: colour dummy device 80x25
Calibrating delay loop... 26.52 BogoMIPS
Memory: 30012k/32768k available (1168k kernel code, 664k data, 68k init)
kmem_create: Forcing size word alignment - filp
VFS: Diskquotas version dquot_6.4.0 initialized
kmem_create: Forcing size word alignment - dquot
POSIX conformance testing by UNIFIX
Zorro: Probing AutoConfig expansion devices: 1 device
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
kmem_create: Forcing size word alignment - skbuff_head_cache
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
kmem_create: Forcing size word alignment - tcp_open_request
Initializing RT netlink socket
Starting kswapd v 1.5
Console: switching to colour frame buffer device 80x32
fb0: Amiga AGA frame buffer device, using 1280K of video memory
>clgenfb_init()
clgen: Driver for Cirrus Logic based graphic boards, v1.4 ?
clgen: no supported board found.
M68K Serial driver version 1.01
Probing for HyperCOM1, version 1.13 date 8.7.99
HyperCOM1 A1200 serial port not found
pty: 256 Unix98 ptys configured
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
ide0: Gayle IDE interface (A1200 style)
hda: ST51270A, ATA DISK drive
ide0 at 80da0000 on irq 0x0000000c
ide0: unexpected interrupt, status=0x51, count=1
hda: ST51270A, 1223MB w/128kB Cache, CHS=2485/16/63
FD: probing units
found <5>fd: drive 0 didn't identify, setting default ffffffff
fd0
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: RDSK hda1 hda2 hda3
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
===[ cut ]===

-- 
\\//
peter - http://www.softwolves.pp.se/

  Statement concerning unsolicited e-mail according to Swedish law:
  http://www.softwolves.pp.se/peter/reklampost.html



Reply to: