Bug#99185: Problem installing Potato on an Amiga 1200
Resubmitting this against the bug for records...
peter karlsson <peter@softwolves.pp.se> writes:
> Christian T. Steigies:
>
> > it usually gives you some information on the third(?) console. what does it
> > day?
>
> It doesn't give any errors.
>
> > Did you set the partition types to linux and swap? Can you show us the
> > kernel boot log or fdisk -l /dev/hda ?
>
> fdisk -l /dev/hda:
>
> ===[ cut ]===
> Disk /dev/hda: 16 heads, 17471 sectors, 18613 cylinders, RDB: 3
> Logical Cylinders from 1 to 22364, 143122432 bytes/Cylinder
>
> Device Boot Mount Begin End Size Pri BBlks System
> /dev/hda1 * * 1 3667 205352 3 0 Amiga FFS
> /dev/hda2 * 3668 21193 981456 0 0 Linux native
> /dev/hda3 * 21194 22364 65576 0 0 Linux swap
> ===[ cut ]===
>
> dmesg:
>
> ===[ cut ]===
> Linux version 2.2.10 (root@aahz) (gcc version 2.7.2.3) #1 Mon Nov 27 20:50:14 CET 2000
> Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO
> Console: colour dummy device 80x25
> Calibrating delay loop... 26.52 BogoMIPS
> Memory: 30012k/32768k available (1168k kernel code, 664k data, 68k init)
> kmem_create: Forcing size word alignment - filp
> VFS: Diskquotas version dquot_6.4.0 initialized
> kmem_create: Forcing size word alignment - dquot
> POSIX conformance testing by UNIFIX
> Zorro: Probing AutoConfig expansion devices: 1 device
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> kmem_create: Forcing size word alignment - sock
> kmem_create: Forcing size word alignment - skbuff_head_cache
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> kmem_create: Forcing size word alignment - tcp_open_request
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Console: switching to colour frame buffer device 80x32
> fb0: Amiga AGA frame buffer device, using 1280K of video memory
> >clgenfb_init()
> clgen: Driver for Cirrus Logic based graphic boards, v1.4 ?
> clgen: no supported board found.
> M68K Serial driver version 1.01
> Probing for HyperCOM1, version 1.13 date 8.7.99
> HyperCOM1 A1200 serial port not found
> pty: 256 Unix98 ptys configured
> RAM disk driver initialized: 16 RAM disks of 4096K size
> loop: registered device at major 7
> ide0: Gayle IDE interface (A1200 style)
> hda: ST51270A, ATA DISK drive
> ide0 at 80da0000 on irq 0x0000000c
> ide0: unexpected interrupt, status=0x51, count=1
> hda: ST51270A, 1223MB w/128kB Cache, CHS=2485/16/63
> FD: probing units
> found <5>fd: drive 0 didn't identify, setting default ffffffff
> fd0
> md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
> scsi : 0 hosts.
> scsi : detected total.
> Partition check:
> hda: RDSK hda1 hda2 hda3
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem).
> ===[ cut ]===
>
> --
> \\//
> peter - http://www.softwolves.pp.se/
>
> Statement concerning unsolicited e-mail according to Swedish law:
> http://www.softwolves.pp.se/peter/reklampost.html
>
>
> --
> To UNSUBSCRIBE, email to debian-boot-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
--
.....Adam Di Carlo....adam@onshore.com.....<URL:http://www.onshored.com/>
Reply to: