Re: Serial Consoles
Am Dienstag, 28. Dezember 2021, 11:35:03 CET schrieb Uwe Kleine-König:
> Hi Rainer,
>
> On 12/28/21 01:17, Rainer Dorsch wrote:
>
> > I am using a serial console to connect to a cubox-i. As terminal program
> > I
> > either use "screen -fn /dev/ttyUSB0 115200" or minicom. If I paste some
> > text
in the terminal, after about 30 characters the content gets lost.
>
> The problem is likely that the characters come in more quickly than the
> soft- and hardware on the cubox-i can work through them. On i.MX6 you
> might be able to tune the water mark level of the FIFO so somewhat
> lessen the problem.
>
> The microcom built into busybox can delay submission, e.g.
>
> busybox microcom -d 20 /dev/ttyUSB0
>
> The other programs to drive a serial console, don't support this AFAIK.
Thanks for the explanation and the microcom reference.
Excellent advise that makes u-boot a lot easier :-)
Thanks
Rainer
--
Rainer Dorsch
http://bokomoko.de/
Reply to: