[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Status of Debian on QNAP



Hello,

I have try to boot my TS-219 with kernel 5.9.0-4-marvell from USB.

Marvell>> fatload usb 0:1 0x800000 kernel
reading kernel

2329698 bytes read
Marvell>> bootm 0x800000
## Booting image at 00800000 ...
   Image Name:   kernel 5.9.0-4-marvell
   Created:      2020-12-05  19:50:52 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2329634 Bytes =  2.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...
...
[    0.060418] Trying to unpack rootfs image as initramfs...
[    0.060445] Initramfs unpacking failed: invalid magic at start of
compressed archive
...
[    1.136226] No filesystem could mount root, tried:
[    1.136228]
[    1.142637] Kernel panic - not syncing: VFS: Unable to mount root fs
on unknown-block(1,0)
[    1.150941] CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-4-marvell
#1 Debian 5.9.11-1
[    1.158888] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[    1.165195] [<c0014a4c>] (unwind_backtrace) from [<c00119d4>]
(show_stack+0x18/0x1c)
[    1.172969] [<c00119d4>] (show_stack) from [<c044bee8>]
(panic+0xdc/0x308)
[    1.179880] [<c044bee8>] (panic) from [<c05c15b4>]
(mount_block_root+0x29c/0x330)
[    1.187395] [<c05c15b4>] (mount_block_root) from [<c05c180c>]
(prepare_namespace+0x148/0x184)
[    1.195957] [<c05c180c>] (prepare_namespace) from [<c044fe94>]
(kernel_init+0x10/0x100)
[    1.203995] [<c044fe94>] (kernel_init) from [<c0008320>]
(ret_from_fork+0x14/0x34)
[    1.211593] Exception stack(0xdf4c3fb0 to 0xdf4c3ff8)
[    1.216661] 3fa0:                                     00000000
00000000 00000000 00000000
[    1.224868] 3fc0: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[    1.233081] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    1.239721] ---[ end Kernel panic - not syncing: VFS: Unable to mount
root fs on unknown-block(1,0) ]---

The initrd is xz compressed.

I would try a non-compressed initrd but I have no idea how to set the
memory addresses in uboot bootargs for the corect size.
root@qnap:/mnt# ls -la
insgesamt 46152
drwxr-xr-x  2 root root     4096  5. Dez 21:18 .
drwxr-xr-x 23 root root     4096  1. Feb 2017  ..
-rwxr-xr-x  1 root root 23948800  5. Dez 21:18 initrd
-rwxr-xr-x  1 root root  9437184  4. Dez 17:13 initrd.old
-rwxr-xr-x  1 root root  9437184  5. Dez 21:17 initrd.xz
-rwxr-xr-x  1 root root  2329698  5. Dez 21:17 kernel
-rwxr-xr-x  1 root root  2097152  4. Dez 17:13 kernel.old
root@qnap:/mnt#

Kernel 4.19 load without problems.

Best Regards


Reply to: