Debian with Debian kernel on Pinebook Pro
Hello *,
I am trying to get a Debian (bullseye) installation to work on the
Pinebook Pro with the Debian kernel package. I managed to install Debian
back in February, but back then this was with a custom kernel with a lot
of patches [0]. As far as I know most if not all of the relevant patches
where merged upstream. Yet I am failing to get a working display.
I am building an image for my sdcard using vmdb2 with a config [1] based
on the excellent Raspberry Pi vmdb2 recipes. I tried with the 5.8 kernel
from experimental.
The image boots, but it does not show anything on the display of the
Pinebook Pro. I have attached a serial cable and extracted a the dmesg
output (attached). I am also able to log in on tty1 without seeing any
output- when I type the username and hit enter I can see the user being
logged in on tty1 when checking via the serial connection.
I looked through the dmesg output but was not able to find what the
missing part was. It might have to do with the error message
'rockchip-usb2phy [...] failed to create phy', which occurs multiple times.
I thought maybe someone on debian-arm has an idea? Maybe a kernel module
or some firmware is missing?
thanks and cheers,
Birger
[0] https://bisco.org/notes/installing-debian-on-the-pinebook-pro/
[1] https://paste.debian.net/1161757/
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.8.0-trunk-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.0-5) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.8.3-1~exp1 (2020-08-24)
[ 0.000000] Machine model: Pine64 Pinebook Pro
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x00000000ef400000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xf77eb100-0xf77ecfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] On node 0 totalpages: 1015296
[ 0.000000] DMA zone: 4088 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 261632 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 11776 pages used for memmap
[ 0.000000] DMA32 zone: 753664 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 33 pages/cpu s94552 r8192 d32424 u135168
[ 0.000000] pcpu-alloc: s94552 r8192 d32424 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=LABEL=ROOT console=ttyS2,1500000n8 console=tty1
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 2007060K/4061184K available (11004K kernel code, 1862K rwdata, 3788K rodata, 5184K init, 559K bss, 196108K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x54/0x6f0 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] ftrace: allocating 36060 entries in 141 pages
[ 0.000000] ftrace: allocated 141 pages with 4 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7fd80000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x000000007fd50000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007fd60000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001796] Console: colour dummy device 80x25
[ 0.002461] printk: console [tty1] enabled
[ 0.002632] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002663] pid_max: default: 32768 minimum: 301
[ 0.002917] LSM: Security Framework initializing
[ 0.002969] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003124] AppArmor: AppArmor initialized
[ 0.003147] TOMOYO Linux initialized
[ 0.003290] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003333] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.006289] rcu: Hierarchical SRCU implementation.
[ 0.008244] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.008706] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.008989] fsl-mc MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.011701] EFI services will not be available.
[ 0.012534] smp: Bringing up secondary CPUs ...
[ 0.013437] Detected VIPT I-cache on CPU1
[ 0.013483] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.013499] GICv3: CPU1: using allocated LPI pending table @0x000000007fd70000
[ 0.013555] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.014519] Detected VIPT I-cache on CPU2
[ 0.014552] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.014566] GICv3: CPU2: using allocated LPI pending table @0x000000007fe00000
[ 0.014601] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.015572] Detected VIPT I-cache on CPU3
[ 0.015604] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.015617] GICv3: CPU3: using allocated LPI pending table @0x000000007fe10000
[ 0.015651] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.016576] CPU features: detected: EL2 vector hardening
[ 0.016600] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.016607] Detected PIPT I-cache on CPU4
[ 0.016644] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.016657] GICv3: CPU4: using allocated LPI pending table @0x000000007fe20000
[ 0.016694] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.017660] Detected PIPT I-cache on CPU5
[ 0.017689] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.017701] GICv3: CPU5: using allocated LPI pending table @0x000000007fe30000
[ 0.017731] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.017861] smp: Brought up 1 node, 6 CPUs
[ 0.018133] SMP: Total of 6 processors activated.
[ 0.018150] CPU features: detected: 32-bit EL0 Support
[ 0.018167] CPU features: detected: CRC32 instructions
[ 0.018185] CPU features: detected: 32-bit EL1 Support
[ 0.040912] CPU: All CPU(s) started at EL2
[ 0.041010] alternatives: patching kernel code
[ 0.113898] node 0 deferred pages initialised in 72ms
[ 0.115437] devtmpfs: initialized
[ 0.128057] Registered cp15_barrier emulation handler
[ 0.128090] Registered setend emulation handler
[ 0.128107] KASLR disabled due to lack of seed
[ 0.128650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.128745] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.130839] pinctrl core: initialized pinctrl subsystem
[ 0.131432] thermal_sys: Registered thermal governor 'fair_share'
[ 0.131435] thermal_sys: Registered thermal governor 'step_wise'
[ 0.131974] DMI not present or invalid.
[ 0.132560] NET: Registered protocol family 16
[ 0.133653] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.134123] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.134587] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.134656] audit: initializing netlink subsys (disabled)
[ 0.134920] audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
[ 0.136246] cpuidle: using governor ladder
[ 0.136444] cpuidle: using governor menu
[ 0.136559] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.136750] ASID allocator initialised with 65536 entries
[ 0.137138] Serial: AMBA PL011 UART driver
[ 0.185350] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.185375] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.185389] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.185403] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.861858] ACPI: Interpreter disabled.
[ 0.862258] iommu: Default domain type: Translated
[ 0.864494] vgaarb: loaded
[ 0.865176] EDAC MC: Ver: 3.0.0
[ 0.867590] NetLabel: Initializing
[ 0.867613] NetLabel: domain hash size = 128
[ 0.867627] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.867731] NetLabel: unlabeled traffic allowed by default
[ 0.868110] clocksource: Switched to clocksource arch_sys_counter
[ 0.945052] VFS: Disk quotas dquot_6.6.0
[ 0.945142] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.945892] AppArmor: AppArmor Filesystem Enabled
[ 0.946223] pnp: PnP ACPI: disabled
[ 0.954742] NET: Registered protocol family 2
[ 0.955534] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.955743] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.956353] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.957028] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.957244] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.957424] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.957768] NET: Registered protocol family 1
[ 0.957803] NET: Registered protocol family 44
[ 0.957822] PCI: CLS 0 bytes, default 64
[ 0.958050] Trying to unpack rootfs image as initramfs...
[ 2.920016] Freeing initrd memory: 26832K
[ 2.921034] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.921394] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 2.921961] kvm [1]: IPA Size Limit: 40bits
[ 2.922530] kvm [1]: vgic-v2@fff20000
[ 2.922571] kvm [1]: GIC system register CPU interface enabled
[ 2.922795] kvm [1]: vgic interrupt IRQ10
[ 2.923065] kvm [1]: Hyp mode initialized successfully
[ 2.924988] Initialise system trusted keyrings
[ 2.925033] Key type blacklist registered
[ 2.925314] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 2.931115] zbud: loaded
[ 2.931787] integrity: Platform Keyring initialized
[ 2.931808] Key type asymmetric registered
[ 2.931820] Asymmetric key parser 'x509' registered
[ 2.931862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.932121] io scheduler mq-deadline registered
[ 2.941074] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.953773] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.956163] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[ 2.956353] serial serial0: tty port ttyS0 registered
[ 2.956928] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
[ 3.048086] printk: console [ttyS2] enabled
[ 3.049656] Serial: AMBA driver
[ 3.050398] msm_serial: driver initialized
[ 3.052425] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 3.054066] mousedev: PS/2 mouse device common for all mice
[ 3.057888] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.061318] NET: Registered protocol family 10
[ 3.115466] Segment Routing with IPv6
[ 3.115887] mip6: Mobile IPv6
[ 3.116179] NET: Registered protocol family 17
[ 3.116815] mpls_gso: MPLS GSO support
[ 3.117481] registered taskstats version 1
[ 3.117857] Loading compiled-in X.509 certificates
[ 3.290970] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.291873] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 3.292717] zswap: loaded using pool lzo/zbud
[ 3.293693] Key type ._fscrypt registered
[ 3.294056] Key type .fscrypt registered
[ 3.294408] Key type fscrypt-provisioning registered
[ 3.295036] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.341161] Freeing unused kernel memory: 5184K
[ 3.412972] Checked W+X mappings: passed, no W+X pages found
[ 3.413502] Run /init as init process
[ 3.413834] with arguments:
[ 3.413838] /init
[ 3.413843] with environment:
[ 3.413847] HOME=/
[ 3.413851] TERM=linux
[ 3.783601] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 3.784359] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 3.797824] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 3.798527] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 3.803270] sdhci: Secure Digital Host Controller Interface driver
[ 3.803844] sdhci: Copyright(c) Pierre Ossman
[ 3.813856] Synopsys Designware Multimedia Card Interface Driver
[ 3.815930] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.830849] sdhci-arasan fe330000.sdhci: No phy for arasan,sdhci-5.1.
[ 3.854033] sdhci-arasan fe330000.sdhci: No phy for arasan,sdhci-5.1.
[ 3.854038] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 3.854073] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 3.855860] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 3.856474] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 3.858923] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 3.859603] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 3.860226] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 3.860811] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 3.861130] sdhci-arasan fe330000.sdhci: No phy for arasan,sdhci-5.1.
[ 3.906306] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 3.906993] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 3.907598] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 3.908180] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 3.919578] usbcore: registered new interface driver usbfs
[ 3.920204] usbcore: registered new interface driver hub
[ 3.920260] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 3.920869] usbcore: registered new device driver usb
[ 3.921367] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 3.922365] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 3.922915] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 3.926920] mmc0: CQHCI version 5.10
[ 3.929194] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: failed to create phy
[ 3.931957] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
[ 3.942406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.958297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.963647] ohci-platform: OHCI generic platform driver
[ 3.985160] ehci-platform: EHCI generic platform driver
[ 4.033284] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 4.035308] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 4.039339] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 4.040077] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 4.040734] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 4.041364] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 4.044776] input: gpio-key-lid as /devices/platform/gpio-key-lid/input/input0
[ 4.046248] input: gpio-key-power as /devices/platform/gpio-key-power/input/input1
[ 4.047154] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 4.047865] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 4.048494] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 4.049065] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 4.053127] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: failed to create phy
[ 4.057103] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
[ 4.082681] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 4.086231] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 4.086917] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 4.087523] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 4.087814] vcc_12v: supplied by vcc_sysin
[ 4.088087] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 4.088928] vcc3v3_sys: supplied by vcc_sysin
[ 4.090456] vcc5v0_usb: supplied by vcc_sysin
[ 4.091647] vcc_0v9: supplied by vcc3v3_sys
[ 4.092537] vcca1v8_s3: supplied by vcc3v3_sys
[ 4.093473] vcc3v0_sd: supplied by vcc3v3_sys
[ 4.094673] vcc3v3_panel: supplied by vcc3v3_sys
[ 4.099297] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 4.099983] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 4.100655] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 4.101289] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 4.105328] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: failed to create phy
[ 4.109221] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
[ 4.116993] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 4.121269] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 4.121956] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 4.122562] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 4.123109] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 4.129190] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 4.129872] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 4.130476] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 4.131026] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 4.148812] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[ 4.152608] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: failed to create phy
[ 4.153503] rockchip-vop ff900000.vop: Adding to iommu group 3
[ 4.157047] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
[ 4.160377] cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
[ 4.161323] cdn-dp: probe of fec00000.dp failed with error -22
[ 4.165695] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 4.170707] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 4.171396] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 4.172010] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 4.172677] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 4.178747] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 4.179437] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 4.180044] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 4.180683] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 4.184735] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: failed to create phy
[ 4.185261] rk808 0-001b: chip id: 0x0
[ 4.188862] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
[ 4.189736] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 4.194935] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 4.198100] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 4.200774] vcc3v3_ssd: supplied by vcc3v3_sys
[ 4.202144] vcc5v0_otg: supplied by vcc5v0_usb
[ 4.203410] vbus_5vout: supplied by vcc5v0_usb
[ 4.208529] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 4.209219] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 4.209825] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 4.210376] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 4.216918] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 4.217607] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 4.218215] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 4.218768] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 4.234908] rk808-rtc rk808-rtc: registered as rtc0
[ 4.235984] rk808-rtc rk808-rtc: setting system clock to 2020-02-25T21:13:14 UTC (1582665194)
[ 4.236483] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 4.237361] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 4.237990] DCDC_REG1: supplied by vcc_sysin
[ 4.239625] DCDC_REG2: supplied by vcc_sysin
[ 4.240939] DCDC_REG3: supplied by vcc_sysin
[ 4.241827] DCDC_REG4: supplied by vcc_sysin
[ 4.242423] random: fast init done
[ 4.243150] vdd_cpu_b: supplied by vcc_1v8
[ 4.243546] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 4.243613] vdd_gpu: supplied by vcc_1v8
[ 4.244216] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 1
[ 4.244599] vcc0v9_s3: supplied by vcc_1v8
[ 4.245391] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
[ 4.245692] LDO_REG1: supplied by vcc_sysin
[ 4.247042] LDO_REG2: supplied by vcc_sysin
[ 4.247912] LDO_REG3: supplied by vcc_sysin
[ 4.249887] LDO_REG4: supplied by vcc_sysin
[ 4.251529] LDO_REG5: supplied by vcc_sysin
[ 4.252949] LDO_REG6: supplied by vcc_sysin
[ 4.254475] LDO_REG7: supplied by vcc_sysin
[ 4.256010] LDO_REG8: supplied by vcc_sysin
[ 4.257588] SWITCH_REG1: supplied by vcc3v3_sys
[ 4.258318] SWITCH_REG2: supplied by vcc3v3_sys
[ 4.308562] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 4.309335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.309993] usb usb1: Product: Generic Platform OHCI controller
[ 4.310527] usb usb1: Manufacturer: Linux 5.8.0-trunk-arm64 ohci_hcd
[ 4.311099] usb usb1: SerialNumber: fe3a0000.usb
[ 4.311140] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.312428] hub 1-0:1.0: USB hub found
[ 4.312835] hub 1-0:1.0: 1 port detected
[ 4.313770] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 4.314647] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 4.315539] xhci-hcd xhci-hcd.1.auto: irq 225, io mem 0xfe800000
[ 4.316463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 4.316818] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 4.317207] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.318457] usb usb2: Product: xHCI Host Controller
[ 4.318893] usb usb2: Manufacturer: Linux 5.8.0-trunk-arm64 xhci-hcd
[ 4.319458] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 4.320584] hub 2-0:1.0: USB hub found
[ 4.320962] hub 2-0:1.0: 1 port detected
[ 4.321805] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.321838] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 3
[ 4.322310] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 4.323192] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
[ 4.323702] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.325008] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.325858] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 4.326593] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.327235] usb usb4: Product: xHCI Host Controller
[ 4.327672] usb usb4: Manufacturer: Linux 5.8.0-trunk-arm64 xhci-hcd
[ 4.328252] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 4.329288] hub 4-0:1.0: USB hub found
[ 4.329663] hub 4-0:1.0: 1 port detected
[ 4.330692] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 4.331203] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5
[ 4.332046] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 4.332952] xhci-hcd xhci-hcd.2.auto: irq 226, io mem 0xfe900000
[ 4.333841] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 4.334578] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.335221] usb usb5: Product: xHCI Host Controller
[ 4.335658] usb usb5: Manufacturer: Linux 5.8.0-trunk-arm64 xhci-hcd
[ 4.336238] usb usb5: SerialNumber: xhci-hcd.2.auto
[ 4.337237] hub 5-0:1.0: USB hub found
[ 4.337623] hub 5-0:1.0: 1 port detected
[ 4.338364] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 4.338866] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[ 4.339555] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[ 4.340234] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.341090] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 4.341826] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.342467] usb usb6: Product: xHCI Host Controller
[ 4.342904] usb usb6: Manufacturer: Linux 5.8.0-trunk-arm64 xhci-hcd
[ 4.343468] usb usb6: SerialNumber: xhci-hcd.2.auto
[ 4.344474] hub 6-0:1.0: USB hub found
[ 4.344856] hub 6-0:1.0: 1 port detected
[ 4.388617] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 4.389380] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.390031] usb usb3: Product: Generic Platform OHCI controller
[ 4.390566] usb usb3: Manufacturer: Linux 5.8.0-trunk-arm64 ohci_hcd
[ 4.391148] usb usb3: SerialNumber: fe3e0000.usb
[ 4.392560] hub 3-0:1.0: USB hub found
[ 4.392985] hub 3-0:1.0: 1 port detected
[ 4.395092] ehci-platform fe380000.usb: EHCI Host Controller
[ 4.395642] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 7
[ 4.396578] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
[ 4.412189] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 4.413133] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 4.413886] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.414544] usb usb7: Product: EHCI Host Controller
[ 4.415008] usb usb7: Manufacturer: Linux 5.8.0-trunk-arm64 ehci_hcd
[ 4.415592] usb usb7: SerialNumber: fe380000.usb
[ 4.417011] hub 7-0:1.0: USB hub found
[ 4.417443] hub 7-0:1.0: 1 port detected
[ 4.421258] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 4.421821] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 8
[ 4.422705] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
[ 4.436124] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 4.437048] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 4.437794] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.438443] usb usb8: Product: EHCI Host Controller
[ 4.438886] usb usb8: Manufacturer: Linux 5.8.0-trunk-arm64 ehci_hcd
[ 4.439457] usb usb8: SerialNumber: fe3c0000.usb
[ 4.440711] hub 8-0:1.0: USB hub found
[ 4.441104] hub 8-0:1.0: 1 port detected
[ 4.443252] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 4.776127] usb 8-1: new high-speed USB device number 2 using ehci-platform
[ 4.916123] usb 8-1: device descriptor read/64, error -71
[ 5.000149] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 5.001205] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 5.005614] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 5.006308] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 5.006912] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 5.007458] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 5.012169] usb 1-1: new low-speed USB device number 2 using ohci-platform
[ 5.013008] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 5.013674] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 5.014276] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 5.014820] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 5.015999] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 5.028433] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.046512] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 5.047234] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 5.047841] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 5.048458] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
[ 5.049527] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[ 5.050051] mmc_host mmc2: card is non-removable.
[ 5.128864] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 5.164135] usb 8-1: device descriptor read/64, error -71
[ 5.168385] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.218248] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 5.220336] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 5.222402] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 5.225721] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 5.229677] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 5.243194] usb 1-1: New USB device found, idVendor=258a, idProduct=001e, bcdDevice= 1.00
[ 5.243950] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.244635] usb 1-1: Product: USB KEYBOARD
[ 5.245027] usb 1-1: Manufacturer: HAILUCK CO.,LTD
[ 5.269372] hid: raw HID events driver (C) Jiri Kosina
[ 5.274719] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 112
[ 5.275370] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 5.277488] mmcblk1: mmc1:aaaa SE32G 29.7 GiB
[ 5.284152] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 5.284838] GPT:3071999 != 62333951
[ 5.285155] GPT:Alternate GPT header not at the end of the disk.
[ 5.285692] GPT:3071999 != 62333951
[ 5.286007] GPT: Use GNU Parted to correct GPT errors.
[ 5.286505] mmcblk1: p1 p2
[ 5.293100] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 5.312298] usbcore: registered new interface driver usbhid
[ 5.312807] usbhid: USB HID core driver
[ 5.321945] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.0/0003:258A:001E.0001/input/input2
[ 5.380780] hid-generic 0003:258A:001E.0001: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0
[ 5.384977] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input3
[ 5.386595] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input4
[ 5.388277] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input5
[ 5.400155] usb 8-1: new high-speed USB device number 3 using ehci-platform
[ 5.448495] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input6
[ 5.449935] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input7
[ 5.451760] hid-generic 0003:258A:001E.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[ 5.569559] usb 8-1: unable to read config index 0 descriptor/all
[ 5.570132] usb 8-1: can't read configurations, error -71
[ 5.570693] usb usb8-port1: attempt power cycle
[ 5.676071] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.914313] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 6.065040] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 48
[ 6.069269] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[ 6.177640] systemd[1]: System time before build time, advancing clock.
[ 6.213765] systemd[1]: Inserted module 'autofs4'
[ 6.220156] usb 8-1: new high-speed USB device number 4 using ehci-platform
[ 6.261326] systemd[1]: systemd 246.2-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 6.264364] systemd[1]: Detected architecture arm64.
[ 6.293799] systemd[1]: Set hostname to <pinebook-pro-20200829>.
[ 6.375552] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 6.644143] usb 8-1: device not accepting address 4, error -71
[ 6.737901] systemd[1]: Queued start job for default target Graphical Interface.
[ 6.739528] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.743744] systemd[1]: Created slice system-getty.slice.
[ 6.744784] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.746716] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.747595] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.749648] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.750832] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.752073] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.753988] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.755265] systemd[1]: Reached target Local Encrypted Volumes.
[ 6.756190] systemd[1]: Reached target Paths.
[ 6.756874] systemd[1]: Reached target Remote File Systems.
[ 6.757651] systemd[1]: Reached target Slices.
[ 6.758345] systemd[1]: Reached target Swap.
[ 6.759541] systemd[1]: Listening on Syslog Socket.
[ 6.760961] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.762128] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.763715] systemd[1]: Listening on Journal Audit Socket.
[ 6.765014] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.766362] systemd[1]: Listening on Journal Socket.
[ 6.767734] systemd[1]: Listening on udev Control Socket.
[ 6.768994] systemd[1]: Listening on udev Kernel Socket.
[ 6.769773] systemd[1]: Reached target Sockets.
[ 6.775765] systemd[1]: Mounting Huge Pages File System...
[ 6.781829] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.788598] systemd[1]: Mounting Kernel Debug File System...
[ 6.795287] systemd[1]: Mounting Kernel Trace File System...
[ 6.802190] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.809038] systemd[1]: Starting resize root file system...
[ 6.814786] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.821674] systemd[1]: Starting File System Check on Root Device...
[ 6.831167] systemd[1]: Starting Journal Service...
[ 6.846702] systemd[1]: Starting Load Kernel Modules...
[ 6.853661] systemd[1]: Starting Coldplug All udev Devices...
[ 6.863492] systemd[1]: Mounted Huge Pages File System.
[ 6.865204] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.866907] systemd[1]: Mounted Kernel Debug File System.
[ 6.868454] systemd[1]: Mounted Kernel Trace File System.
[ 6.872469] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.889365] systemd[1]: Started File System Check Daemon to report status.
[ 6.899973] systemd[1]: Finished Load Kernel Modules.
[ 6.902007] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 6.903170] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 6.909031] systemd[1]: Starting Apply Kernel Variables...
[ 6.979003] systemd[1]: Finished File System Check on Root Device.
[ 6.984885] systemd[1]: Finished Apply Kernel Variables.
[ 6.993469] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.060610] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[ 7.075650] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 7.087661] systemd[1]: Starting Rebuild Hardware Database...
[ 7.089160] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 7.097527] systemd[1]: Starting Load/Save Random Seed...
[ 7.100179] usb 3-1: new full-speed USB device number 2 using ohci-platform
[ 7.106404] systemd[1]: Starting Create System Users...
[ 7.296015] systemd[1]: Finished Create System Users.
[ 7.296921] usb 3-1: device descriptor read/64, error -62
[ 7.305461] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.311532] systemd[1]: Finished Coldplug All udev Devices.
[ 7.321456] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 7.349628] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 7.393428] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 7.600149] usb 3-1: device descriptor read/64, error -62
[ 7.896175] usb 3-1: new full-speed USB device number 3 using ohci-platform
[ 7.909577] systemd[1]: Started Journal Service.
[ 8.092167] usb 3-1: device descriptor read/64, error -62
[ 8.392134] usb 3-1: device descriptor read/64, error -62
[ 8.500211] usb usb3-port1: attempt power cycle
[ 9.004140] usb 3-1: new full-speed USB device number 4 using ohci-platform
[ 9.420171] usb 3-1: device not accepting address 4, error -62
[ 9.582354] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
[ 9.583428] energy_model: Created perf domain 0-3
[ 9.593010] energy_model: Created perf domain 4-5
[ 9.608136] usb 3-1: new full-speed USB device number 5 using ohci-platform
[ 9.666936] pwm-regulator: supplied by regulator-dummy
[ 9.668698] rockchip-dp ff970000.edp: no DP phy configured
[ 9.706069] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 9.730568] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.732001] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 9.733947] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 9.735815] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.753975] platform regulatory.0: firmware: failed to load regulatory.db (-2)
[ 9.754651] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 9.755499] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 9.756311] cfg80211: failed to load regulatory.db
[ 9.793095] spi-nor spi0.0: gd25q128 (16384 Kbytes)
[ 9.813505] panfrost ff9a0000.gpu: clock rate = 500000000
[ 9.816306] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[ 9.817014] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[ 9.817743] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 9.818785] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[ 9.839288] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[ 9.840437] brcmfmac mmc2:0001:1: firmware: failed to load brcm/brcmfmac43456-sdio.bin (-2)
[ 9.841176] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.bin failed with error -2
[ 9.843835] usbcore: registered new interface driver brcmfmac
[ 9.859675] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[ 9.912433] cryptd: max_cpu_qlen set to 1000
[ 9.917675] Bluetooth: Core ver 2.22
[ 9.918072] NET: Registered protocol family 31
[ 9.918074] Bluetooth: HCI device and connection manager initialized
[ 9.918086] Bluetooth: HCI socket layer initialized
[ 9.918091] Bluetooth: L2CAP socket layer initialized
[ 9.918099] Bluetooth: SCO socket layer initialized
[ 9.947131] Bluetooth: HCI UART driver ver 2.3
[ 9.947551] Bluetooth: HCI UART protocol H4 registered
[ 9.948214] Bluetooth: HCI UART protocol LL registered
[ 9.948688] Bluetooth: HCI UART protocol ATH3K registered
[ 9.949245] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.950190] Bluetooth: HCI UART protocol Intel registered
[ 9.951124] Bluetooth: HCI UART protocol Broadcom registered
[ 9.951705] Bluetooth: HCI UART protocol QCA registered
[ 9.952217] Bluetooth: HCI UART protocol AG6XX registered
[ 9.952789] Bluetooth: HCI UART protocol Marvell registered
[ 10.008507] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input8
[ 10.010022] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input9
[ 10.011478] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input10
[ 10.028169] usb 3-1: device not accepting address 5, error -62
[ 10.028826] usb usb3-port1: unable to enumerate USB device
[ 10.072258] dw-apb-uart ff180000.serial: failed to request DMA
[ 10.073022] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input11
[ 10.075704] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb1/1-1/1-1:1.1/0003:258A:001E.0002/input/input12
[ 10.077833] hid-multitouch 0003:258A:001E.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
[ 10.313062] Bluetooth: hci0: BCM: chip id 130
[ 10.313820] Bluetooth: hci0: BCM: features 0x0f
[ 10.316363] Bluetooth: hci0: BCM4345C5
[ 10.316709] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[ 10.317315] bluetooth hci0: firmware: failed to load brcm/BCM4345C5.hcd (-2)
[ 10.317990] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2)
[ 10.318573] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 10.319159] Bluetooth: hci0: BCM: 'brcm/BCM4345C5.hcd'
[ 10.319615] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[ 10.854634] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 10.886507] random: crng init done
[ 10.886842] random: 7 urandom warning(s) missed due to ratelimiting
[ 17.274491] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[ 17.552512] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 17.553288] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 17.789774] audit: type=1400 audit(1597696100.608:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=402 comm="apparmor_parser"
[ 17.842193] audit: type=1400 audit(1597696100.660:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=403 comm="apparmor_parser"
[ 17.844192] audit: type=1400 audit(1597696100.664:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=403 comm="apparmor_parser"
[ 33.764129] vcc3v3_ssd: disabling
[ 33.764437] vbus_5vout: disabling
[ 33.764730] vcc0v9_s3: disabling
Reply to: