Help needed after updating Debian on QNAP TS-109 Pro II
Hi,
I have been happily running Squeeze from a USB stick on my QNAP TS-109 Pro II for a long time. Today, I decided to update my system with 'apt-get upgrade'. Some packages were updated but I saw that some files were "kept back" by apt-get - so I decided to run 'apt-get dist-upgrade' without knowing any better.
This is when problems started. Would anyone be able to help?
Apparently the update changed the mgmt of hard disks to some UUID-based plot that I am not familiar with. For example, my /etc/fstab was changed as follows:
kaappikone# less /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda2 / ext3 errors=remount-ro,noatime 0 1
UUID=59c82707-e5bd-4538-a2ad-b697635e9313 / ext3 errors=remount-ro,noatime 0 1
# /dev/sda1 /boot ext2 defaults 0 2
UUID=42cacc9b-4dfd-4cd9-85dc-8810a82af109 /boot ext2 defaults 0 2
# /dev/sda5 none swap sw 0 0
UUID=0f4c0b92-afd9-45de-b9b1-40b93d458ffa none swap sw 0 0
# /dev/sdb2 /bigdisk ext3 noatime 0 1
UUID=af48689a-1f86-4a8b-ab86-be90915b37d9 /bigdisk ext3 noatime 0 1
The bit that worries me is that the upgrade program gave me the following warning:
│ Boot loader configuration check needed │
│ │
│ The boot loader configuration for this system was not recognized. These │
│ settings in the configuration may need to be updated: │
│ │
│ * The root device ID passed as a kernel parameter; │
│ * The boot device ID used to install and update the boot loader. │
│ │
│ │
│ You should generally identify these devices by UUID or label. However, │
│ on MIPS systems the root device must be identified by name.
Would anyone be able to help me how to do that? Or, more generally, how to ensure that my QNAP box will be able to boot again?
I have not yet rebooted since the update. I am able to login with SSH but for some reason smb crashes as soon as I try to connect to it. This did not happen before the update.
Thanks!
Juha
Reply to: