[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Bricked Sheevaplug



On Thu, Feb 09, 2012 at 05:45:03PM +0100, DrEagle wrote:
> Hello,
> 
> It is really hard to brick a sheeva plug.
> You always can use usb console as jtag and flash a new uboot with openocd.
> 
> I have not my notes with me to give more help for now.
> 
> Gérald
> 
> ----- Message d'origine -----
> De: Andrew M.A. Cater <amacater@galactic.demon.co.uk>
> Env: jeudi 9 février 2012 14:45
> À: debian-arm@lists.debian.org
> Objet: Bricked Sheevaplug
> 
> Upated to lastest DENX U-boot and went to install Debian as per Martin's excellent instructions.
> 
> Aborted the install part way through.
> 
> Now can't get back into the plug via U-boot : screen /dev/ttyUSB0 115200 isn't working.
> 
> Have one green light - serial plug, reset are facing you as the plug lies with mains on right had side, Ethernet on left: this is the right hand one of the two green LEDs opposite the SD card.
> 
> There is Ethernet activity.
> 
> Reset button has no apparent effect.
> 
> Nmap doesn't show it at least at 192.168.1.0/24
> 
> Any ideas?
> 
> This is the third or fourth attempt: I've another working Sheevaplug installed last week, but without serial console to this one I can't get any further.
> 
> All best
> 
> AndyC
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> Archive: [🔎] 20120209134519.GA2417@galactic.demon.co.uk">http://lists.debian.org/[🔎] 20120209134519.GA2417@galactic.demon.co.uk
> 

This is precisely the problem: it is _NOT_ coming up with serial console and there's no obvious record of it on the network. I see some activity on hard reset from 
blinking lights - but I can't get any further.

AndyC


Reply to: