|
Hi all, I've tried installing the latest version on my Thermaltake Muse. The system's hardware is recognized as XScale-IOP8032x Family rev 0 (v5l). The installer seems to load fine but as soon as it reaches the first "screen" the output becomes unreadable. Please read below for an output. I've tried disconnect/reconnect the serial cable, changing RS-232 parameters to no avail. Any hints would be appreciated. Thanks, Mello ======= Ethernet eth0: MAC address 00:40:d0:8a:1f:99 IP: 192.168.1.11/255.255.255.0, Gateway: 192.168.1.1 Default server: 192.168.1.122, DNS server IP: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROM] Intel IOP RedBoot release version 2.2.V6-IOP-RedBoot built 13:51:51, Jan 12 2006 Platform: EP80219 (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x20000000, 0x00021790-0x1ffd1000 available FLASH: 0xf0000000 - 0xf0800000, 64 blocks of 0x00020000 bytes each. == Executing boot script in 1.000 seconds - enter ^C to abort ^C RedBoot> load -v -r -h 192.168.1.101 -b 0x01800000 -m tftp initrd.gz -----------<suppressed output>------------- Raw file loaded 0x01800000-0x01bcae63, assumed entry at 0x01800000 Redboot> load -r -v -h 192.168.1.101 -b 0x01008000 -m tftp zImage -----------<suppressed output>------------- Raw file loaded 0x01008000-0x0113a6a7, assumed entry at 0x01008000 Redboot> exec -c "console=ttyS0,115200n8 rw root=/dev/ram mem=512M@0xa0000000" -r 0x01800000 Using base address 0x01008000 and length 0x001326a8 The boot tags are located at 0xA0000100 Booting the kernel... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-iop32x (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Fri Dec 10 19:47:27 UTC 2010 [ 0.000000] CPU: XScale-80219 [69052e20] revision 0 (ARMv5TE), cr=0000397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Lanner EM7210 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rw root=/dev/ram mem=512M@0xa0000000 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 511744KB available (3080K code, 444K data, 112K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:32 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 398.95 BogoMIPS (lpj=1994752) [ 0.210000] Security Framework initialized [ 0.210000] SELinux: Disabled at boot. [ 0.210000] Mount-cache hash table entries: 512 [ 0.210000] Initializing cgroup subsys ns [ 0.210000] Initializing cgroup subsys cpuacct [ 0.210000] Initializing cgroup subsys devices [ 0.210000] Initializing cgroup subsys freezer [ 0.210000] Initializing cgroup subsys net_cls [ 0.210000] CPU: Testing write buffer coherency: ok [ 0.210000] devtmpfs: initialized [ 0.210000] regulator: core version 0.5 [ 0.210000] NET: Registered protocol family 16 [ 0.220000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.220000] pci 0000:00:01.0: PME# disabled [ 0.220000] PCI: bus0: Fast back to back transfers disabled [ 0.220000] bio: create slab <bio-0> at 0 [ 0.220000] vgaarb: loaded [ 0.240000] NET: Registered protocol family 2 [ 0.240000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.240000] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.240000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.240000] TCP: Hash tables configured (established 16384 bind 16384) [ 0.240000] TCP reno registered [ 0.240000] NET: Registered protocol family 1 [ 0.240000] Unpacking initramfs... [ 1.440000] Freeing initrd memory: 4096K [ 1.450000] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.450000] audit: initializing netlink socket (disabled) [ 1.450000] type=2000 audit(1.450:1): initialized [ 1.460000] VFS: Disk quotas dquot_6.5.2 [ 1.470000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.470000] msgmni has been set to 1007 [ 1.470000] alg: No test for stdrng (krng) [ 1.470000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.470000] io scheduler noop registered [ 1.470000] io scheduler anticipatory registered [ 1.470000] io scheduler deadline registered [ 1.470000] io scheduler cfq registered (default) [ 1.480000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.490000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 28) is a 16550A [ 1.800000] console [ttyS0] enabled [ 1.800000] physmap platform flash device: 02000000 at f0000000 [ 1.810000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank [ 1.810000] Intel/Sharp Extended Query Table at 0x0031 [ 1.820000] Intel/Sharp Extended Query Table at 0x0031 [ 1.820000] Using buffer write method [ 1.830000] cfi_cmdset_0001: Erase suspend on write enabled [ 1.830000] Searching for RedBoot partition table in physmap-flash.0 at offset 0x7e0000 [ 2.160000] 6 RedBoot partitions found on MTD device physmap-flash.0 [ 2.160000] Creating 6 MTD partitions on "physmap-flash.0": [ 2.170000] 0x000000000000-0x000000040000 : "RedBoot" [ 2.180000] 0x000000040000-0x000000240000 : "zImage" [ 2.180000] 0x000000240000-0x000000640000 : "ramdisk.gz" [ 2.190000] 0x0000007a0000-0x0000007c0000 : "vendor" [ 2.200000] 0x0000007c0000-0x0000007c1000 : "RedBoot config" [ 2.200000] mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only [ 2.210000] 0x0000007e0000-0x000000800000 : "FIS directory" [ 2.220000] mice: PS/2 mouse device common for all mice [ 2.230000] i2c /dev entries driver [ 2.230000] rtc-rs5c372 0-0032: can't read registers [ 2.240000] rtc-rs5c372: probe of 0-0032 failed with error -5 [ 2.260000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr ) [ 2.280000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr ) [ 2.280000] TCP cubic registered [ 2.290000] NET: Registered protocol family 17 [ 2.290000] XScale DSP coprocessor detected. [ 2.300000] registered taskstats version 1 [ 2.300000] /build/buildd-linux-2.6_2.6.32-29-armel-2LYIJf/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.320000] Initalizing network drop monitor service [ 2.320000] Freeing init memory: 112K [ 3.220000] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 3.220000] Copyright (c) 1999-2006 Intel Corporation. [ 3.540000] e1000: 0000:00:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:40:d0:8a:1f:99 [ 3.800000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Starting system log daemon: syslogd, klogd. ┌─────────────────────┤ [!] C⎺┼°␋±┤⎼␊ ├␊ ┼␊├┬⎺⎼┐ ├─────────────────────┐ │ │ │ P┌␊▒⎽␊ ␊┼├␊⎼ ├␊ ⎺⎽├┼▒└␊ °⎺⎼ ├␋⎽ ⎽≤⎽├␊└. │ │ │ │ T␊ ⎺⎽├┼▒└␊ ␋⎽ ▒ ⎽␋┼±┌␊ ┬⎺⎼␍ ├▒├ ␋␍␊┼├␋°␋␊⎽ ≤⎺┤⎼ ⎽≤⎽├␊└ ├⎺ ├␊ │ │ ┼␊├┬⎺⎼┐. I° ≤⎺┤ ␍⎺┼'├ ┐┼⎺┬ ┬▒├ ≤⎺┤⎼ ⎺⎽├┼▒└␊ ⎽⎺┤┌␍ ␉␊, ␌⎺┼⎽┤┌├ ≤⎺┤⎼ │ │ ┼␊├┬⎺⎼┐ ▒␍└␋┼␋⎽├⎼▒├⎺⎼. I° ≤⎺┤ ▒⎼␊ ⎽␊├├␋┼± ┤⎻ ≤⎺┤⎼ ⎺┬┼ ⎺└␊ ┼␊├┬⎺⎼┐, │ │ ≤⎺┤ ␌▒┼ └▒┐␊ ⎽⎺└␊├␋┼± ┤⎻ ␊⎼␊. │ │ │ │ H⎺⎽├┼▒└␊: │ │ │ │ ␍␊␉␋▒┼▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮▮ │ │ │ │ <G⎺ B▒␌┐> <C⎺┼├␋┼┤␊> │ │ │ └───────────────────────────────────────────────────────────────────────┘ <T▒␉> └⎺┴␊⎽; <S⎻▒␌␊> ⎽␊┌␊␌├⎽; <E┼├␊⎼> ▒␌├␋┴▒├␊⎽ ␉┤├├⎺┼⎽ |