[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Debian on OpenRD-Ultimate

Le Sun, Jun 20, 2010 at 02:06:56PM +0100, Martin Michlmayr a écrit :
> Download the installer files and store them on your TFTP server:
> wget http://merkel.debian.org/~tbm/tmp/kernel/uImage-kirkwood_2.6.32-16
> wget http://people.debian.org/~joeyh/d-i/armel/images/daily/kirkwood/netboot/marvell/openrd/uInitrd
> Load them from the TFTP server and start the installer:

Hi Martin,

I tested the images, but unfortunately there is again a problem with the
network card. During detection, I have the choice between no ethernet card,
libphy, mv643xx_eth, or none of the above. When I chose libphy, I am sent
again to the network hardware detection screen. When I chose mv643xx_eth,
I am sent to the main menu, but if I chose Configure the network, it sends
me again to the hardware detection screen. The syslog contains many lines
like this:

Jun 20 10:07:13 ethdetect: insmod /lib/modules/2.6.32-5-kirkwood/kernel/drivers/net/mv643xx_eth.ko 
Jun 20 10:07:13 kernel: [  222.099773] mv643xx_eth: Unknown symbol lro_flush_all
Jun 20 10:07:13 kernel: [  222.101367] mv643xx_eth: Unknown symbol lro_receive_skb
Jun 20 10:07:13 ethdetect: FATAL: Error inserting mv643xx_eth (/lib/modules/2.6.32-5-kirkwood/kernel/drivers/net/mv643xx_eth.ko): Unknown symbol in module, or unknown parameter (see dmesg)

I have attached the dmsg, syslog and hardware-summary as gzipped files to this email.



Attachment: Plessy-OpenRD-Ultimate-2010-06-20-2.dmesg.gz
Description: Binary data

Attachment: Plessy-OpenRD-Ultimate-2010-06-20-2.hardware-summary.gz
Description: Binary data

Attachment: Plessy-OpenRD-Ultimate-2010-06-20-2.syslog.gz
Description: Binary data

Reply to: