On Jun 18, 2009, at 4:46 PM, I wrote:
I needed to move my SheevaPlug to a different part of the lab.
So I logged into the console port.
Issued a "shutdown -h now".
Waited til it said it was shutdown.
Unplugged it.
Moved it.
Plugged it back in.
The little green light comes on, but...
The little blue light never does come on.
I can "connect" to the console port with cu from a close-by Linux
box.
But it never says anything.
I've pushed the "reset" thingie with a paperclip (felt a definite
click)
but to no avail. Still no blue light.
it was running fine (Debian Lenny based on Martin's tarball,
booting from a 16GB USB stick) before I shut it down...
On Jun 18, 2009, at 5:05 PM, Steve Pirk wrote:
Rick, do you still have the original os on the internal flash? If
so, try removing the usb drive and boot. Mine has died twice with
corrupt SD or usb memory. Once I get the system up, fdisk does not
even see a partition on the external mem.
I replied:
So far as I know, I haven't touched the internal flash. I did try
unplugging everything from the USB and SD slots (and the ethernet
too, on the off chance) and powering off/resetting. No go. Still
only the green light and no response (but with connection) from the
console port.
On Jun 18, 2009, at 5:22 PM, Tzafrir Cohen wrote:
How can you tell that you actually connected and got the right
terminal
definitions? Did those work before?
I replied:
Well... I do
cu -s 115200 -l /dev/ttyUSB1
which is what I've always done -- and has always worked before.
cu prints "connected" which indicates that it is seeing the
equivalent of what with RS-232 would be DSR asserted (USB is
different, I know...)
But when I hit <cr> or otherwise bang on the keyboard, I get
nothing. I would expect to see "Marvell>>" at least, but... nothing.
And no little blue light. Anybody know what turns that on? At
what stage of the initialization process should I expect to see it?
On Jun 18, 2009, at 7:28 PM, David Given wrote:
If all else fails you can hook up OpenOCD via USB and reprogram it
using the JTAG interface (/dev/ttyUSB0), so don't panic!
http://www.openplug.org/plugwiki/index.php/Setting_Up_OpenOCD_Under_Linux