[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 2.6.8-12-amd64-k8 raid1 freezes with spurious interrupts

On Wed, Aug 09, 2006 at 08:05:05AM -0400, hendrik@topoi.pooq.com wrote:
> Not a fix for your problem, but isn't it better the have the drives 
> in your RAID on *different* IDE chains?

If they are SATA drives, then they are on seperate interfaces (since
SATA doesn't have shared connections, well unless you use a bus expander
on a controller that supports it).

For IDE it is essential to not have more than one drive per raid per
channel.  You can run two independant raids sharing channels if you
want, but never put two drives in the same raid if they share an ide

Len Sorensen

Reply to: