On Fri, 2006-02-24 at 17:02 +0100, Hans wrote: > Hello all, > > I am looking for two solutions with wireless cards. I have a Broadcom bcm4318 > and a realtek rtl8169. > > > - How can I force to use eth0 for the wlan-card, and eth1 for the > hardwired-card ? I use udev, so sometimes theezh0 and eth1 changes at > starting. Hardwired shall have a fixed IP, wlan shall get the ip with dhcp. Use ifrename for resolve your problem! > > - How can I force to use 11MBit on the wlan-card. The wlan-card originally > always is using 54MBit. This my entry in /etc/network/interfaces, but this > does not work: > > # The primary network interface > auto eth0 eth1 > > iface eth0 inet dhcp > wireless-essid myssid > wireless-channel 6 > wireless-key XXXXXXXXX > wireless-mode managed > wireless-rate 11M <--- This should change the rate > > iface eth1 inet static > address xxx.xxx.xxx.y > netmask yyy.yyy.yyy.z > network xxx.xxx.xxx.0 > broadcast xxx.xxx.xxx.255 > gateway xxx.xxx.xxx.x > > Best regards > > Hans > > > > > > > > > -- .''`. ** Debian GNU/Linux ** | Francesco Cecconi ' |BrAnD| ' : :' : The Universal O.S. | brand80@users.sourceforge.net `. `'` | GPG Key ID: 11F6E468 `- | JID brand80@jabber.linux.it
Attachment:
signature.asc
Description: This is a digitally signed message part