The simpler solution would be to execute modprobe -f sk98lin :-) worked
for me ))
By the way, I had similar issues with ext3 module not loading. Do the
same to fix it
On Mon, 2005-01-31 at 10:28 +0000, Daniel James wrote:
> Hi Morten,
>
> > My computer, a Shuttle SN95G5, has an ethernet controller with
> > a Marvell 8001 chipset. This is supported by the sk98lin
> > module, but when I try to install with this image
> >
> >
> > ftp://ftp.caliu.info/pub/distribucions/debian-amd64/install-images/
> > \ sarge-amd64-netinst.iso
> >
> > (image is dated Jan. 16 2005)
> >
> > it fails to load the module
>
> I had the same problem with the sid pure64 netinst iso image. The
> workaround was to exit base-config, reboot to the installed kernel
> (which did have the module) then edit /etc/network/interfaces
> and /etc/resolv.conf by hand. Then I did ifup eth0 and tried
> base-config again - I was then able to configure apt using one of the
> pure64 mirrors.
>
> I agree this is an unfortunate bug in the installer, as so many amd64
> machines seem to have that ethernet chipset.
>
> Cheers
>
> Daniel
>
>
--
Andrei Mikhailovsky
Arhont Ltd - Information Security
Web: http://www.arhont.com
http://www.wi-foo.com
Tel: +44 (0)870 4431337
Fax: +44 (0)117 9690141
PGP: Key ID - 0xFF67A4F4
PGP: Server - keyserver.pgp.com
Attachment:
signature.asc
Description: This is a digitally signed message part