Re: INIT problems continue
Eric Sharkey <sharkey@netrics.com> writes:
D> > Stephen Waters <debian@luy.info> writes:
> >
> > > On Thu, 2004-02-05 at 08:39, Goswin von Brederlow wrote:
> > > > Maybe you could read the FAQ first.
> > >
> > > With all due respect, I read the FAQ, too, and it's not nearly as clear
> > > as the instructions you write below:
> > >
> > > > Use woody i386 as base and install biarch tools to compile the
> > > > kernel. Once you have a 64bit kernel bootet you can do things right.
> > > >
> > > > Use cdebootstrap, debootstrap is crap. Use sarge on alioth and not
> > > > sid. Don't mix in debians sarge/sid packages (and never libc6)
> > > > untill alioth has a newer libc6 that works for biarch.
> > >
> > > ...
> > >
> > > -s
> >
> > The FAQ has more elaborate instructions. Why don't you follow them?
>
> I've read the FAQ. Several times. I do not posts to lists without
> reading the FAQ.
>
> It is *not* clear.
Ok, where are you stuck?
> > Correction to the FAQ are welcome
>
> I'll send a patch. I'd feel more comfortable if I'd managed to
> successfully complete the process described in the FAQ first, though.
>
> The helpful reader who suggested using woody several days ago did
> get me past that part, but I still haven't gotten through the Perl
> dependency issue.
Lets try to follow the FAQ instructions:
----------------------------------------------------------------------
opteron:/# mkdir -p /chroot/sarge-amd64
opteron:/# cdebootstrap -a amd64 sarge /chroot/sarge-amd64 http://debian-amd64.alioth.debian.org/
I: Download indices...
P: Downloading dists/sarge/Release
P: Parsing debian-amd64.alioth.debian.org_dists_sarge_Release
P: Downloading dists/sarge/main/binary-amd64/Packages.gz
P: Validating debian-amd64.alioth.debian.org_dists_sarge_main_binary-amd64_Packages.gz
P: Parsing debian-amd64.alioth.debian.org_dists_sarge_main_binary-amd64_Packages
I: Download packages...
P: Downloading pool/sarge/d/db1-compat/libdb1-compat_2.1.3-7_i386.deb
P: Validating libdb1-compat_2.1.3-7_i386.deb
P: Downloading pool/glibc/2.3.2-7.biarch1/libc6_2.3.2-7.biarch1_i386.deb
P: Validating libc6_2.3.2-7.biarch1_i386.deb
P: Downloading pool/gcc-3.3/3.3.2-0pre4/lib64gcc1_3.3.2-0pre4.biarch1_i386.deb
P: Validating lib64gcc1_3.3.2-0pre4.biarch1_i386.deb
P: Downloading pool/glibc/2.3.2-7.biarch1/lib64c6_2.3.2-7.biarch1_i386.deb
P: Validating lib64c6_2.3.2-7.biarch1_i386.deb
P: Downloading pool/gcc-3.3/3.3.2-0pre4/gcc-3.3-base_3.3.2-0pre4.biarch1_i386.deb
P: Validating gcc-3.3-base_3.3.2-0pre4.biarch1_i386.deb
P: Downloading pool/gcc-3.3/3.3.2-0pre4/lib64stdc++5_3.3.2-0pre4.biarch1_i386.deb
P: Validating lib64stdc++5_3.3.2-0pre4.biarch1_i386.deb
P: Downloading pool/apt/0.5.14-subarch1/apt_0.5.14-subarch1_amd64.deb
P: Validating apt_0.5.14-subarch1_amd64.deb
P: Downloading pool/main/b/base-passwd/base-passwd-3.5.4/base-passwd_3.5.4_amd64.deb
P: Validating base-passwd_3.5.4_amd64.deb
P: Downloading pool/main/m/makedev/makedev-2.3.1/makedev_2.3.1-64_all.deb
P: Validating makedev_2.3.1-64_all.deb
P: Downloading pool/main/i/iputils/iputils-20020927/iputils-ping_20020927-1_amd64.deb
P: Validating iputils-ping_20020927-1_amd64.deb
P: Downloading pool/main/n/netkit-base/netkit-base-0.10/netkit-inetd_0.10-9_amd64.deb
P: Validating netkit-inetd_0.10-9_amd64.deb
P: Downloading pool/main/s/sysklogd/sysklogd-1.4.1/klogd_1.4.1-13_amd64.deb
P: Validating klogd_1.4.1-13_amd64.deb
P: Downloading pool/main/s/sysklogd/sysklogd-1.4.1/sysklogd_1.4.1-13_amd64.deb
P: Validating sysklogd_1.4.1-13_amd64.deb
P: Downloading pool/slang/1.4.9-2/slang1a-utf8_1.4.9-2.lib64_i386.deb
P: Validating slang1a-utf8_1.4.9-2.lib64_i386.deb
P: Downloading pool/sarge/n/newt/libnewt0.51_0.51.4-18_i386.deb
P: Validating libnewt0.51_0.51.4-18_i386.deb
P: Downloading pool/sarge/p/popt/libpopt0_1.7-3_i386.deb
P: Validating libpopt0_1.7-3_i386.deb
P: Downloading pool/sarge/n/newt/whiptail_0.51.4-18_i386.deb
P: Validating whiptail_0.51.4-18_i386.deb
P: Downloading pool/sarge/p/perl/perl-base_5.8.0-18_i386.deb
P: Validating perl-base_5.8.0-18_i386.deb
P: Downloading pool/sarge/libl/liblocale-gettext-perl/liblocale-gettext-perl_1.01-17_i386.deb
P: Validating liblocale-gettext-perl_1.01-17_i386.deb
P: Downloading pool/sarge/libt/libtext-iconv-perl/libtext-iconv-perl_1.2-2_i386.deb
P: Validating libtext-iconv-perl_1.2-2_i386.deb
P: Downloading pool/sarge/libt/libtext-charwidth-perl/libtext-charwidth-perl_0.04-1_i386.deb
P: Validating libtext-charwidth-perl_0.04-1_i386.deb
P: Downloading pool/sarge/libt/libtext-wrapi18n-perl/libtext-wrapi18n-perl_0.06-1_all.deb
P: Validating libtext-wrapi18n-perl_0.06-1_all.deb
P: Downloading pool/main/d/debconf/debconf-1.3.22/debconf-i18n_1.3.22_all.deb
P: Validating debconf-i18n_1.3.22_all.deb
P: Downloading pool/main/d/debconf/debconf-1.3.22/debconf_1.3.22_all.deb
P: Validating debconf_1.3.22_all.deb
P: Downloading pool/sarge/p/pam/libpam-runtime_0.76-14_all.deb
P: Validating libpam-runtime_0.76-14_all.deb
P: Downloading pool/sarge/p/pam/libpam0g_0.76-14_i386.deb
P: Validating libpam0g_0.76-14_i386.deb
P: Downloading pool/sarge/libc/libcap/libcap1_1.10-12_i386.deb
P: Validating libcap1_1.10-12_i386.deb
P: Downloading pool/sarge/d/db3/libdb3_3.2.9-19_i386.deb
P: Validating libdb3_3.2.9-19_i386.deb
P: Downloading pool/sarge/p/pam/libpam-modules_0.76-14_i386.deb
P: Validating libpam-modules_0.76-14_i386.deb
P: Downloading pool/sarge/s/shadow/login_4.0.3-12_i386.deb
P: Validating login_4.0.3-12_i386.deb
P: Downloading pool/sarge/s/shadow/passwd_4.0.3-12_i386.deb
P: Validating passwd_4.0.3-12_i386.deb
P: Downloading pool/main/a/adduser/adduser-3.51/adduser_3.51_all.deb
P: Validating adduser_3.51_all.deb
P: Downloading pool/main/c/console-data/console-data-2002.12.04dbs/console-data_2002.12.04dbs-25_all.deb
P: Validating console-data_2002.12.04dbs-25_all.deb
P: Downloading pool/console-tools/0.2.3dbs/lib64console_0.2.3dbs-43lib64_amd64.deb
P: Validating lib64console_0.2.3dbs-43lib64_amd64.deb
P: Downloading pool/main/s/sysvinit/sysvinit-2.85/sysv-rc_2.85-7_all.deb
P: Validating sysv-rc_2.85-7_all.deb
P: Downloading pool/ncurses5/5.3.20030719-2.amd64/lib64ncurses5_5.3.20030719-2.amd64_i386.deb
P: Validating lib64ncurses5_5.3.20030719-2.amd64_i386.deb
P: Downloading pool/main/d/dpkg/dpkg-1.10.18/dselect_1.10.18-subarch2.1_amd64.deb
P: Validating dselect_1.10.18-subarch2.1_amd64.deb
P: Downloading pool/main/d/dpkg/dpkg-1.10.18/dpkg_1.10.18-subarch2.1_amd64.deb
P: Validating dpkg_1.10.18-subarch2.1_amd64.deb
P: Downloading pool/sarge/u/util-linux/mount_2.12-3_i386.deb
P: Validating mount_2.12-3_i386.deb
P: Downloading pool/ncurses5/5.3.20030719-2.amd64/libncurses5_5.3.20030719-2.amd64_i386.deb
P: Validating libncurses5_5.3.20030719-2.amd64_i386.deb
P: Downloading pool/zlib/1:1.1.4-15lib64.1/zlib1g_1.1.4-15lib64.1_i686.deb
P: Validating zlib1g_1.1.4-15lib64.1_i686.deb
P: Downloading pool/sarge/u/util-linux/util-linux_2.12-3_i386.deb
P: Validating util-linux_2.12-3_i386.deb
P: Downloading pool/sarge/e/e2fsprogs/e2fslibs_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Validating e2fslibs_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Downloading pool/sarge/e/e2fsprogs/libblkid1_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Validating libblkid1_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Downloading pool/sarge/e/e2fsprogs/libcomerr2_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Validating libcomerr2_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Downloading pool/sarge/e/e2fsprogs/libss2_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Validating libss2_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Downloading pool/sarge/e/e2fsprogs/libuuid1_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Validating libuuid1_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Downloading pool/sarge/e/e2fsprogs/e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Validating e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Downloading pool/main/s/sysvinit/sysvinit-2.85/initscripts_2.85-7_all.deb
P: Validating initscripts_2.85-7_all.deb
P: Downloading pool/main/s/sysvinit/sysvinit-2.85/sysvinit_2.85-7_amd64.deb
P: Validating sysvinit_2.85-7_amd64.deb
P: Downloading pool/coreutils/5.0-5/coreutils_5.0-5_amd64.deb
P: Validating coreutils_5.0-5_amd64.deb
P: Downloading pool/debianutils/2.5.5/debianutils_2.5.5_amd64.deb
P: Validating debianutils_2.5.5_amd64.deb
P: Downloading pool/main/c/console-common/console-common-0.7.33/console-common_0.7.33_all.deb
P: Validating console-common_0.7.33_all.deb
P: Downloading pool/console-tools/0.2.3dbs/libconsole_0.2.3dbs-43lib64_i386.deb
P: Validating libconsole_0.2.3dbs-43lib64_i386.deb
P: Downloading pool/console-tools/0.2.3dbs/console-tools_0.2.3dbs-43lib64_i386.deb
P: Validating console-tools_0.2.3dbs-43lib64_i386.deb
P: Downloading pool/sarge/u/util-linux/bsdutils_2.12-3_i386.deb
P: Validating bsdutils_2.12-3_i386.deb
P: Downloading pool/main/b/base-config/base-config-1.75/base-config_1.75_all.deb
P: Validating base-config_1.75_all.deb
P: Downloading pool/modutils/2.4.25-0.biarch1/modutils_2.4.25-0.biarch1_i386.deb
P: Validating modutils_2.4.25-0.biarch1_i386.deb
P: Downloading pool/sarge/m/modconf/modconf_0.2.44_all.deb
P: Validating modconf_0.2.44_all.deb
P: Downloading pool/ncurses5/5.3.20030719-2.amd64/ncurses-base_5.3.20030719-2.amd64_all.deb
P: Validating ncurses-base_5.3.20030719-2.amd64_all.deb
P: Downloading pool/tar/1.13.25/tar_1.13.25-6_amd64.deb
P: Validating tar_1.13.25-6_amd64.deb
P: Downloading pool/ncurses5/5.3.20030719-2.amd64/ncurses-bin_5.3.20030719-2.amd64_i386.deb
P: Validating ncurses-bin_5.3.20030719-2.amd64_i386.deb
P: Downloading pool/main/f/findutils/findutils-4.1.20/findutils_4.1.20-3_amd64.deb
P: Validating findutils_4.1.20-3_amd64.deb
P: Downloading pool/main/m/mawk/mawk-1.3.3/mawk_1.3.3-11_amd64.deb
P: Validating mawk_1.3.3-11_amd64.deb
P: Downloading pool/main/b/base-files/base-files-3.0.12/base-files_3.0.12_amd64.deb
P: Validating base-files_3.0.12_amd64.deb
P: Downloading pool/bash/2.05b-9.1/bash_2.05b-9.1_amd64.deb
P: Validating bash_2.05b-9.1_amd64.deb
P: Downloading pool/main/h/hostname/hostname-2.10/hostname_2.10_amd64.deb
P: Validating hostname_2.10_amd64.deb
P: Downloading pool/main/d/diff/diff-2.8.1/diff_2.8.1-6_amd64.deb
P: Validating diff_2.8.1-6_amd64.deb
P: Downloading pool/sed/4.0.7/sed_4.0.7-1_amd64.deb
P: Validating sed_4.0.7-1_amd64.deb
P: Downloading pool/gzip/1.3.5-7/gzip_1.3.5-7_amd64.deb
P: Validating gzip_1.3.5-7_amd64.deb
P: Downloading pool/grep/2.5.1/grep_2.5.1-6_amd64.deb
P: Validating grep_2.5.1-6_amd64.deb
I: Extracting core packages...
P: Extracting libc6_2.3.2-7.biarch1_i386.deb
P: Extracting libdb1-compat_2.1.3-7_i386.deb
P: Extracting lib64gcc1_3.3.2-0pre4.biarch1_i386.deb
P: Extracting lib64c6_2.3.2-7.biarch1_i386.deb
P: Extracting base-passwd_3.5.4_amd64.deb
P: Extracting makedev_2.3.1-64_all.deb
P: Extracting slang1a-utf8_1.4.9-2.lib64_i386.deb
P: Extracting perl-base_5.8.0-18_i386.deb
P: Extracting libpam-runtime_0.76-14_all.deb
P: Extracting libpam0g_0.76-14_i386.deb
P: Extracting libcap1_1.10-12_i386.deb
P: Extracting libdb3_3.2.9-19_i386.deb
P: Extracting libpam-modules_0.76-14_i386.deb
P: Extracting login_4.0.3-12_i386.deb
P: Extracting passwd_4.0.3-12_i386.deb
P: Extracting sysv-rc_2.85-7_all.deb
P: Extracting lib64ncurses5_5.3.20030719-2.amd64_i386.deb
P: Extracting gcc-3.3-base_3.3.2-0pre4.biarch1_i386.deb
P: Extracting lib64stdc++5_3.3.2-0pre4.biarch1_i386.deb
P: Extracting dselect_1.10.18-subarch2.1_amd64.deb
P: Extracting dpkg_1.10.18-subarch2.1_amd64.deb
P: Extracting mount_2.12-3_i386.deb
P: Extracting libncurses5_5.3.20030719-2.amd64_i386.deb
P: Extracting zlib1g_1.1.4-15lib64.1_i686.deb
P: Extracting util-linux_2.12-3_i386.deb
P: Extracting e2fslibs_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Extracting libblkid1_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Extracting libcomerr2_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Extracting libss2_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Extracting libuuid1_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Extracting e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb
P: Extracting initscripts_2.85-7_all.deb
P: Extracting sysvinit_2.85-7_amd64.deb
P: Extracting coreutils_5.0-5_amd64.deb
P: Extracting debianutils_2.5.5_amd64.deb
P: Extracting bsdutils_2.12-3_i386.deb
P: Extracting modutils_2.4.25-0.biarch1_i386.deb
P: Extracting ncurses-base_5.3.20030719-2.amd64_all.deb
P: Extracting tar_1.13.25-6_amd64.deb
P: Extracting ncurses-bin_5.3.20030719-2.amd64_i386.deb
P: Extracting findutils_4.1.20-3_amd64.deb
P: Extracting mawk_1.3.3-11_amd64.deb
P: Extracting base-files_3.0.12_amd64.deb
P: Extracting bash_2.05b-9.1_amd64.deb
P: Extracting hostname_2.10_amd64.deb
P: Extracting diff_2.8.1-6_amd64.deb
P: Extracting sed_4.0.7-1_amd64.deb
P: Extracting gzip_1.3.5-7_amd64.deb
P: Extracting grep_2.5.1-6_amd64.deb
I: Installing required packages...
P: Unpacking package dpkg
P: Configuring package dpkg
P: Unpacking package libc6
P: Unpacking package libdb1-compat
P: Unpacking package lib64gcc1
P: Unpacking package lib64c6
P: Unpacking package base-passwd
P: Unpacking package makedev
P: Unpacking package slang1a-utf8
P: Unpacking package perl-base
P: Unpacking package libpam-runtime
P: Unpacking package libpam0g
P: Unpacking package libcap1
P: Unpacking package libdb3
P: Unpacking package libpam-modules
P: Unpacking package login
P: Unpacking package passwd
P: Unpacking package sysv-rc
P: Unpacking package lib64ncurses5
P: Unpacking package gcc-3.3-base
P: Unpacking package lib64stdc++5
P: Unpacking package dselect
P: Unpacking package mount
P: Unpacking package libncurses5
P: Unpacking package zlib1g
P: Unpacking package util-linux
P: Unpacking package e2fslibs
P: Unpacking package libblkid1
P: Unpacking package libcomerr2
P: Unpacking package libss2
P: Unpacking package libuuid1
P: Unpacking package e2fsprogs
P: Unpacking package initscripts
P: Unpacking package sysvinit
P: Unpacking package coreutils
P: Unpacking package debianutils
P: Unpacking package bsdutils
P: Unpacking package modutils
P: Unpacking package ncurses-base
P: Unpacking package tar
P: Unpacking package ncurses-bin
P: Unpacking package findutils
P: Unpacking package mawk
P: Unpacking package base-files
P: Unpacking package bash
P: Unpacking package hostname
P: Unpacking package diff
P: Unpacking package sed
P: Unpacking package gzip
P: Unpacking package grep
P: Configuring package ncurses-base
P: Configuring package sysv-rc
P: Configuring package libpam-runtime
P: Configuring package gcc-3.3-base
P: Configuring package libc6
P: Configuring package libcap1
P: Configuring package libdb1-compat
P: Configuring package libuuid1
P: Configuring package libpam0g
P: Configuring package bsdutils
P: Configuring package perl-base
P: Configuring package zlib1g
P: Configuring package slang1a-utf8
P: Configuring package mount
P: Configuring package libncurses5
P: Configuring package e2fslibs
P: Configuring package libcomerr2
P: Configuring package libblkid1
P: Configuring package libss2
P: Configuring package lib64c6
P: Configuring package e2fsprogs
P: Configuring package diff
P: Configuring package libdb3
P: Configuring package util-linux
P: Configuring package lib64gcc1
P: Configuring package coreutils
P: Configuring package debianutils
P: Configuring package lib64stdc++5
P: Configuring package libpam-modules
P: Configuring package tar
P: Configuring package lib64ncurses5
P: Configuring package sed
P: Configuring package base-passwd
P: Configuring package mawk
P: Configuring package grep
P: Configuring package hostname
P: Configuring package initscripts
P: Configuring package findutils
P: Configuring package gzip
P: Configuring package dselect
P: Configuring package makedev
P: Configuring package login
P: Configuring package ncurses-bin
P: Configuring package base-files
P: Configuring package passwd
P: Configuring package sysvinit
P: Configuring package bash
P: Configuring package modutils
I: Installing important packages...
P: Unpacking package apt
P: Configuring package apt
E: Couldn't install root!
----------------------------------------------------------------------
Now thats something new. Something broke. But lets keep going. The
essential packages are installed and configured and the chroot should
be functional.
----------------------------------------------------------------------
opteron:/# chroot /chroot/sarge-amd64
opteron:/# ls
bin cdrom etc home lib mnt proc sbin usr
boot dev floppy initrd lib64 opt root tmp var
opteron:/# mount proc /proc -t proc
warning: can't open /etc/fstab: No such file or directory
opteron:/# apt-get update
COMPAT_ARCHS: i686 i586 i486 i386 all
0% [Connecting to debian-amd64.alioth.debian.org (192.87.30.200)]
Hit http://debian-amd64.alioth.debian.org sarge/main Packages
Ign http://debian-amd64.alioth.debian.org sarge/main Release
Reading Package Lists... 0%
Reading Package Lists... 100%
Reading Package Lists... Done
opteron:/# apt-get -f install
COMPAT_ARCHS: i686 i586 i486 i386 all
Reading Package Lists... 0%
Reading Package Lists... 100%
Reading Package Lists... Done
Building Dependency Tree... 0%
Building Dependency Tree... 0%
Building Dependency Tree... 50%
Building Dependency Tree... 50%
Building Dependency Tree... Done
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
----------------------------------------------------------------------
Nothing unpackaged and left for dead. Good. Lets keep going.
----------------------------------------------------------------------
opteron:/# apt-get install gcc gcc-3.3 g++-3.3 patch make devscripts dpkg-dev lib64c6-dev libc6-dev lib64ncurses5-dev libncurses5-dev
COMPAT_ARCHS: i686 i586 i486 i386 all
Reading Package Lists... 0%
Reading Package Lists... 100%
Reading Package Lists... Done
Building Dependency Tree... 0%
Building Dependency Tree... 0%
Building Dependency Tree... 50%
Building Dependency Tree... 50%
Building Dependency Tree... Done
The following extra packages will be installed:
binutils cpio cpp cpp-3.3 libdb4.0 libgcc1 libgdbm3 libstdc++5
libstdc++5-3.3-dev perl perl-modules
Suggested packages:
devscripts-el cvs-buildpackage dupload dput gnuplot libtimedate-perl lintian
linda ssh wdiff gnupg manpages-dev automake flex gdb gcc-3.3-doc
libstdc++5-3.3-doc libterm-readline-perl-perl
Recommended packages:
fakeroot
The following NEW packages will be installed:
binutils cpio cpp cpp-3.3 devscripts dpkg-dev g++-3.3 gcc gcc-3.3 lib64c6-dev
lib64ncurses5-dev libc6-dev libdb4.0 libgcc1 libgdbm3 libncurses5-dev
libstdc++5 libstdc++5-3.3-dev make patch perl perl-modules
0 upgraded, 22 newly installed, 0 to remove and 1 not upgraded.
Need to get 21.3MB of archives.
After unpacking 76.1MB of additional disk space will be used.
Do you want to continue? [Y/n] y
0% [Working]
0% [Connecting to debian-amd64.alioth.debian.org]
0% [Waiting for headers]
Get:1 http://debian-amd64.alioth.debian.org sarge/main cpio 2.5-1.1 [69.7kB]
Get:2 http://debian-amd64.alioth.debian.org sarge/main libgcc1 1:3.3.2-0pre4.biarch1 [71.1kB]
Get:3 http://debian-amd64.alioth.debian.org sarge/main libstdc++5 1:3.3.2-0pre4.biarch1 [282kB]
Get:4 http://debian-amd64.alioth.debian.org sarge/main binutils 2.14.90.0.6-5 [2430kB]
Get:5 http://debian-amd64.alioth.debian.org sarge/main cpp-3.3 1:3.3.2-0pre4.biarch1 [1500kB]
Get:6 http://debian-amd64.alioth.debian.org sarge/main cpp 4:3.3.1--6 [26.1kB]
Get:7 http://debian-amd64.alioth.debian.org sarge/main perl-modules 5.8.0-21.lib64 [1947kB]
Get:8 http://debian-amd64.alioth.debian.org sarge/main libdb4.0 4.0.14-1.2lib641 [277kB]
Get:9 http://debian-amd64.alioth.debian.org sarge/main libgdbm3 1.8.3-2 [22.7kB]
Get:10 http://debian-amd64.alioth.debian.org sarge/main perl 5.8.0-18 [3858kB]
Get:11 http://debian-amd64.alioth.debian.org sarge/main patch 2.5.9-1 [93.3kB]
Get:12 http://debian-amd64.alioth.debian.org sarge/main make 3.80-4 [357kB]
Get:13 http://debian-amd64.alioth.debian.org sarge/main dpkg-dev 1.10.18-subarch2.1 [118kB]
Get:14 http://debian-amd64.alioth.debian.org sarge/main gcc-3.3 1:3.3.2-0pre4.biarch1 [1344kB]
Get:15 http://debian-amd64.alioth.debian.org sarge/main libc6-dev 2.3.2-7.biarch1 [2631kB]
Get:16 http://debian-amd64.alioth.debian.org sarge/main libstdc++5-3.3-dev 1:3.3.2-0pre4.biarch1 [1141kB]
Get:17 http://debian-amd64.alioth.debian.org sarge/main g++-3.3 1:3.3.2-0pre4.biarch1 [1882kB]
Get:18 http://debian-amd64.alioth.debian.org sarge/main gcc 4:3.3.1-3 [6944B]
Get:19 http://debian-amd64.alioth.debian.org sarge/main lib64c6-dev 2.3.2-7.biarch1 [1669kB]
Get:20 http://debian-amd64.alioth.debian.org sarge/main devscripts 2.7.94.3 [178kB]
Get:21 http://debian-amd64.alioth.debian.org sarge/main libncurses5-dev 5.3.20030719-2.amd64 [1028kB]
Get:22 http://debian-amd64.alioth.debian.org sarge/main lib64ncurses5-dev 5.3.20030719-2.amd64 [349kB]
Fetched 21.3MB in 5m22s (65.9kB/s)
Selecting previously deselected package cpio.
(Reading database ... 4210 files and directories currently installed.)
Unpacking cpio (from .../cpio_2.5-1.1_amd64.deb) ...
Selecting previously deselected package libgcc1.
Unpacking libgcc1 (from .../libgcc1_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Selecting previously deselected package libstdc++5.
Unpacking libstdc++5 (from .../libstdc++5_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Selecting previously deselected package binutils.
Unpacking binutils (from .../binutils_2.14.90.0.6-5_i386.deb) ...
Selecting previously deselected package cpp-3.3.
Unpacking cpp-3.3 (from .../cpp-3.3_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Selecting previously deselected package cpp.
Unpacking cpp (from .../cpp_4%3a3.3.1--6_amd64.deb) ...
Selecting previously deselected package perl-modules.
Unpacking perl-modules (from .../perl-modules_5.8.0-21.lib64_all.deb) ...
Selecting previously deselected package libdb4.0.
Unpacking libdb4.0 (from .../libdb4.0_4.0.14-1.2lib641_i386.deb) ...
Selecting previously deselected package libgdbm3.
Unpacking libgdbm3 (from .../libgdbm3_1.8.3-2_amd64.deb) ...
Selecting previously deselected package perl.
Unpacking perl (from .../perl_5.8.0-18_i386.deb) ...
Selecting previously deselected package patch.
Unpacking patch (from .../patch_2.5.9-1_amd64.deb) ...
Selecting previously deselected package make.
Unpacking make (from .../archives/make_3.80-4_amd64.deb) ...
Selecting previously deselected package dpkg-dev.
Unpacking dpkg-dev (from .../dpkg-dev_1.10.18-subarch2.1_all.deb) ...
Selecting previously deselected package gcc-3.3.
Unpacking gcc-3.3 (from .../gcc-3.3_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Selecting previously deselected package libc6-dev.
Unpacking libc6-dev (from .../libc6-dev_2.3.2-7.biarch1_i386.deb) ...
Selecting previously deselected package libstdc++5-3.3-dev.
Unpacking libstdc++5-3.3-dev (from .../libstdc++5-3.3-dev_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Selecting previously deselected package g++-3.3.
Unpacking g++-3.3 (from .../g++-3.3_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Selecting previously deselected package gcc.
Unpacking gcc (from .../gcc_4%3a3.3.1-3_amd64.deb) ...
Selecting previously deselected package lib64c6-dev.
Unpacking lib64c6-dev (from .../lib64c6-dev_2.3.2-7.biarch1_i386.deb) ...
Selecting previously deselected package devscripts.
Unpacking devscripts (from .../devscripts_2.7.94.3_amd64.deb) ...
Selecting previously deselected package libncurses5-dev.
Unpacking libncurses5-dev (from .../libncurses5-dev_5.3.20030719-2.amd64_i386.deb) ...
Selecting previously deselected package lib64ncurses5-dev.
Unpacking lib64ncurses5-dev (from .../lib64ncurses5-dev_5.3.20030719-2.amd64_i386.deb) ...
Setting up cpio (2.5-1.1) ...
Setting up libgcc1 (3.3.2-0pre4.biarch1) ...
Setting up libstdc++5 (3.3.2-0pre4.biarch1) ...
Setting up binutils (2.14.90.0.6-5) ...
Setting up cpp-3.3 (3.3.2-0pre4.biarch1) ...
Setting up cpp (3.3.1--6) ...
Setting up libdb4.0 (4.0.14-1.2lib641) ...
Setting up libgdbm3 (1.8.3-2) ...
Setting up patch (2.5.9-1) ...
Setting up make (3.80-4) ...
Setting up gcc-3.3 (3.3.2-0pre4.biarch1) ...
Setting up libc6-dev (2.3.2-7.biarch1) ...
Setting up gcc (3.3.1-3) ...
Setting up lib64c6-dev (2.3.2-7.biarch1) ...
Setting up libncurses5-dev (5.3.20030719-2.amd64) ...
Setting up lib64ncurses5-dev (5.3.20030719-2.amd64) ...
Setting up perl-modules (5.8.0-21.lib64) ...
Setting up g++-3.3 (3.3.2-0pre4.biarch1) ...
Setting up libstdc++5-3.3-dev (3.3.2-0pre4.biarch1) ...
Setting up perl (5.8.0-18) ...
Setting up dpkg-dev (1.10.18-subarch2.1) ...
Setting up devscripts (2.7.94.3) ...
----------------------------------------------------------------------
Seem to work so what did break? Lets reinstall all packages downloaded
to see if any of them had problems:
----------------------------------------------------------------------
opteron:/# dpkg -iR /var/cache/apt/archives/
(Reading database ... 8505 files and directories currently installed.)
Preparing to replace libdb1-compat 2.1.3-7 (using .../libdb1-compat_2.1.3-7_i386.deb) ...
Unpacking replacement libdb1-compat ...
Preparing to replace libc6 2.3.2-7.biarch1 (using .../libc6_2.3.2-7.biarch1_i386.deb) ...
Unpacking replacement libc6 ...
Preparing to replace lib64gcc1 1:3.3.2-0pre4.biarch1 (using .../lib64gcc1_3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement lib64gcc1 ...
Preparing to replace lib64c6 2.3.2-7.biarch1 (using .../lib64c6_2.3.2-7.biarch1_i386.deb) ...
Unpacking replacement lib64c6 ...
Preparing to replace gcc-3.3-base 1:3.3.2-0pre4.biarch1 (using .../gcc-3.3-base_3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement gcc-3.3-base ...
Preparing to replace lib64stdc++5 1:3.3.2-0pre4.biarch1 (using .../lib64stdc++5_3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement lib64stdc++5 ...
Preparing to replace apt 0.5.14-subarch1 (using .../apt_0.5.14-subarch1_amd64.deb) ...
Unpacking replacement apt ...
Preparing to replace base-passwd 3.5.4 (using .../base-passwd_3.5.4_amd64.deb) ...
Unpacking replacement base-passwd ...
Preparing to replace makedev 2.3.1-64 (using .../makedev_2.3.1-64_all.deb) ...
Unpacking replacement makedev ...
Selecting previously deselected package iputils-ping.
Unpacking iputils-ping (from .../iputils-ping_20020927-1_amd64.deb) ...
Selecting previously deselected package netkit-inetd.
Unpacking netkit-inetd (from .../netkit-inetd_0.10-9_amd64.deb) ...
Selecting previously deselected package klogd.
Unpacking klogd (from .../klogd_1.4.1-13_amd64.deb) ...
Selecting previously deselected package sysklogd.
Unpacking sysklogd (from .../sysklogd_1.4.1-13_amd64.deb) ...
Preparing to replace slang1a-utf8 1.4.9-2.lib64 (using .../slang1a-utf8_1.4.9-2.lib64_i386.deb) ...
Unpacking replacement slang1a-utf8 ...
Selecting previously deselected package libnewt0.51.
Unpacking libnewt0.51 (from .../libnewt0.51_0.51.4-18_i386.deb) ...
Selecting previously deselected package libpopt0.
Unpacking libpopt0 (from .../libpopt0_1.7-3_i386.deb) ...
Selecting previously deselected package whiptail.
Unpacking whiptail (from .../whiptail_0.51.4-18_i386.deb) ...
Preparing to replace perl-base 5.8.0-18 (using .../perl-base_5.8.0-18_i386.deb) ...
Unpacking replacement perl-base ...
Selecting previously deselected package liblocale-gettext-perl.
Unpacking liblocale-gettext-perl (from .../liblocale-gettext-perl_1.01-17_i386.deb) ...
Selecting previously deselected package libtext-iconv-perl.
Unpacking libtext-iconv-perl (from .../libtext-iconv-perl_1.2-2_i386.deb) ...
Selecting previously deselected package libtext-charwidth-perl.
Unpacking libtext-charwidth-perl (from .../libtext-charwidth-perl_0.04-1_i386.deb) ...
Selecting previously deselected package libtext-wrapi18n-perl.
Unpacking libtext-wrapi18n-perl (from .../libtext-wrapi18n-perl_0.06-1_all.deb) ...
Selecting previously deselected package debconf-i18n.
Unpacking debconf-i18n (from .../debconf-i18n_1.3.22_all.deb) ...
Selecting previously deselected package debconf.
Unpacking debconf (from .../debconf_1.3.22_all.deb) ...
Preparing to replace libpam-runtime 0.76-14 (using .../libpam-runtime_0.76-14_all.deb) ...
Unpacking replacement libpam-runtime ...
Preparing to replace libpam0g 0.76-14 (using .../libpam0g_0.76-14_i386.deb) ...
Unpacking replacement libpam0g ...
Preparing to replace libcap1 1:1.10-12 (using .../libcap1_1.10-12_i386.deb) ...
Unpacking replacement libcap1 ...
Preparing to replace libdb3 3.2.9-19 (using .../libdb3_3.2.9-19_i386.deb) ...
Unpacking replacement libdb3 ...
Preparing to replace libpam-modules 0.76-14 (using .../libpam-modules_0.76-14_i386.deb) ...
Unpacking replacement libpam-modules ...
Preparing to replace login 1:4.0.3-12 (using .../login_4.0.3-12_i386.deb) ...
Unpacking replacement login ...
Preparing to replace passwd 1:4.0.3-12 (using .../passwd_4.0.3-12_i386.deb) ...
Unpacking replacement passwd ...
Selecting previously deselected package adduser.
Unpacking adduser (from .../archives/adduser_3.51_all.deb) ...
Selecting previously deselected package console-data.
Unpacking console-data (from .../console-data_2002.12.04dbs-25_all.deb) ...
Selecting previously deselected package lib64console.
Unpacking lib64console (from .../lib64console_0.2.3dbs-43lib64_amd64.deb) ...
Preparing to replace sysv-rc 2.85-7 (using .../sysv-rc_2.85-7_all.deb) ...
Unpacking replacement sysv-rc ...
Preparing to replace lib64ncurses5 5.3.20030719-2.amd64 (using .../lib64ncurses5_5.3.20030719-2.amd64_i386.deb) ...
Unpacking replacement lib64ncurses5 ...
Preparing to replace dselect 1.10.18-subarch2.1 (using .../dselect_1.10.18-subarch2.1_amd64.deb) ...
Unpacking replacement dselect ...
Preparing to replace dpkg 1.10.18-subarch2.1 (using .../dpkg_1.10.18-subarch2.1_amd64.deb) ...
Unpacking replacement dpkg ...
Preparing to replace mount 2.12-3 (using .../archives/mount_2.12-3_i386.deb) ...
Unpacking replacement mount ...
Preparing to replace libncurses5 5.3.20030719-2.amd64 (using .../libncurses5_5.3.20030719-2.amd64_i386.deb) ...
Unpacking replacement libncurses5 ...
Preparing to replace zlib1g 1:1.1.4-15lib64.1 (using .../zlib1g_1.1.4-15lib64.1_i686.deb) ...
Unpacking replacement zlib1g ...
Preparing to replace util-linux 2.12-3 (using .../util-linux_2.12-3_i386.deb) ...
Unpacking replacement util-linux ...
Preparing to replace e2fslibs 1.34+1.35-WIP-2003.08.21-3 (using .../e2fslibs_1.34+1.35-WIP-2003.08.21-3_i386.deb) ...
Unpacking replacement e2fslibs ...
Preparing to replace libblkid1 1.34+1.35-WIP-2003.08.21-3 (using .../libblkid1_1.34+1.35-WIP-2003.08.21-3_i386.deb) ...
Unpacking replacement libblkid1 ...
Preparing to replace libcomerr2 1.34+1.35-WIP-2003.08.21-3 (using .../libcomerr2_1.34+1.35-WIP-2003.08.21-3_i386.deb) ...
Unpacking replacement libcomerr2 ...
Preparing to replace libss2 1.34+1.35-WIP-2003.08.21-3 (using .../libss2_1.34+1.35-WIP-2003.08.21-3_i386.deb) ...
Unpacking replacement libss2 ...
Preparing to replace libuuid1 1.34+1.35-WIP-2003.08.21-3 (using .../libuuid1_1.34+1.35-WIP-2003.08.21-3_i386.deb) ...
Unpacking replacement libuuid1 ...
Preparing to replace e2fsprogs 1.34+1.35-WIP-2003.08.21-3 (using .../e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb) ...
Unpacking replacement e2fsprogs ...
Preparing to replace initscripts 2.85-7 (using .../initscripts_2.85-7_all.deb) ...
Unpacking replacement initscripts ...
Preparing to replace sysvinit 2.85-7 (using .../sysvinit_2.85-7_amd64.deb) ...
Unpacking replacement sysvinit ...
Preparing to replace coreutils 5.0-5 (using .../coreutils_5.0-5_amd64.deb) ...
Unpacking replacement coreutils ...
Preparing to replace debianutils 2.5.5 (using .../debianutils_2.5.5_amd64.deb) ...
Unpacking replacement debianutils ...
Selecting previously deselected package console-common.
dpkg: regarding .../console-common_0.7.33_all.deb containing console-common, pre-dependency problem:
console-common pre-depends on debconf (>= 0.5)
debconf is unpacked, but has never been configured.
dpkg: error processing /var/cache/apt/archives/console-common_0.7.33_all.deb (--install):
pre-dependency problem - not installing console-common
Selecting previously deselected package libconsole.
Unpacking libconsole (from .../libconsole_0.2.3dbs-43lib64_i386.deb) ...
Selecting previously deselected package console-tools.
Unpacking console-tools (from .../console-tools_0.2.3dbs-43lib64_i386.deb) ...
Preparing to replace bsdutils 1:2.12-3 (using .../bsdutils_2.12-3_i386.deb) ...
Unpacking replacement bsdutils ...
Selecting previously deselected package base-config.
Unpacking base-config (from .../base-config_1.75_all.deb) ...
Preparing to replace modutils 2.4.25-0.biarch1 (using .../modutils_2.4.25-0.biarch1_i386.deb) ...
Unpacking replacement modutils ...
Selecting previously deselected package modconf.
Unpacking modconf (from .../modconf_0.2.44_all.deb) ...
Preparing to replace ncurses-base 5.3.20030719-2.amd64 (using .../ncurses-base_5.3.20030719-2.amd64_all.deb) ...
Unpacking replacement ncurses-base ...
Preparing to replace tar 1.13.25-6 (using .../tar_1.13.25-6_amd64.deb) ...
Unpacking replacement tar ...
Preparing to replace ncurses-bin 5.3.20030719-2.amd64 (using .../ncurses-bin_5.3.20030719-2.amd64_i386.deb) ...
Unpacking replacement ncurses-bin ...
Preparing to replace findutils 4.1.20-3 (using .../findutils_4.1.20-3_amd64.deb) ...
Unpacking replacement findutils ...
Preparing to replace mawk 1.3.3-11 (using .../mawk_1.3.3-11_amd64.deb) ...
Unpacking replacement mawk ...
Preparing to replace base-files 3.0.12 (using .../base-files_3.0.12_amd64.deb) ...
Unpacking replacement base-files ...
Preparing to replace bash 2.05b-9.1 (using .../bash_2.05b-9.1_amd64.deb) ...
Unpacking replacement bash ...
Preparing to replace hostname 2.10 (using .../hostname_2.10_amd64.deb) ...
Unpacking replacement hostname ...
Preparing to replace diff 2.8.1-6 (using .../diff_2.8.1-6_amd64.deb) ...
Unpacking replacement diff ...
Preparing to replace sed 4.0.7-1 (using .../archives/sed_4.0.7-1_amd64.deb) ...
Unpacking replacement sed ...
Preparing to replace gzip 1.3.5-7 (using .../gzip_1.3.5-7_amd64.deb) ...
Unpacking replacement gzip ...
Preparing to replace grep 2.5.1-6 (using .../grep_2.5.1-6_amd64.deb) ...
Unpacking replacement grep ...
Preparing to replace cpio 2.5-1.1 (using .../cpio_2.5-1.1_amd64.deb) ...
Unpacking replacement cpio ...
Preparing to replace libgcc1 1:3.3.2-0pre4.biarch1 (using .../libgcc1_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement libgcc1 ...
Preparing to replace libstdc++5 1:3.3.2-0pre4.biarch1 (using .../libstdc++5_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement libstdc++5 ...
Preparing to replace binutils 2.14.90.0.6-5 (using .../binutils_2.14.90.0.6-5_i386.deb) ...
Unpacking replacement binutils ...
Preparing to replace cpp-3.3 1:3.3.2-0pre4.biarch1 (using .../cpp-3.3_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement cpp-3.3 ...
Preparing to replace cpp 4:3.3.1--6 (using .../cpp_4%3a3.3.1--6_amd64.deb) ...
Unpacking replacement cpp ...
Preparing to replace perl-modules 5.8.0-21.lib64 (using .../perl-modules_5.8.0-21.lib64_all.deb) ...
Unpacking replacement perl-modules ...
Preparing to replace libdb4.0 4.0.14-1.2lib641 (using .../libdb4.0_4.0.14-1.2lib641_i386.deb) ...
Unpacking replacement libdb4.0 ...
Preparing to replace libgdbm3 1.8.3-2 (using .../libgdbm3_1.8.3-2_amd64.deb) ...
Unpacking replacement libgdbm3 ...
Preparing to replace perl 5.8.0-18 (using .../perl_5.8.0-18_i386.deb) ...
Unpacking replacement perl ...
Preparing to replace patch 2.5.9-1 (using .../patch_2.5.9-1_amd64.deb) ...
Unpacking replacement patch ...
Preparing to replace make 3.80-4 (using .../archives/make_3.80-4_amd64.deb) ...
Unpacking replacement make ...
Preparing to replace dpkg-dev 1.10.18-subarch2.1 (using .../dpkg-dev_1.10.18-subarch2.1_all.deb) ...
Unpacking replacement dpkg-dev ...
Preparing to replace gcc-3.3 1:3.3.2-0pre4.biarch1 (using .../gcc-3.3_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement gcc-3.3 ...
Preparing to replace libc6-dev 2.3.2-7.biarch1 (using .../libc6-dev_2.3.2-7.biarch1_i386.deb) ...
Unpacking replacement libc6-dev ...
Preparing to replace libstdc++5-3.3-dev 1:3.3.2-0pre4.biarch1 (using .../libstdc++5-3.3-dev_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement libstdc++5-3.3-dev ...
Preparing to replace g++-3.3 1:3.3.2-0pre4.biarch1 (using .../g++-3.3_1%3a3.3.2-0pre4.biarch1_i386.deb) ...
Unpacking replacement g++-3.3 ...
Preparing to replace gcc 4:3.3.1-3 (using .../gcc_4%3a3.3.1-3_amd64.deb) ...
Removing old gcc doc directory.
Unpacking replacement gcc ...
Preparing to replace lib64c6-dev 2.3.2-7.biarch1 (using .../lib64c6-dev_2.3.2-7.biarch1_i386.deb) ...
Unpacking replacement lib64c6-dev ...
Preparing to replace devscripts 2.7.94.3 (using .../devscripts_2.7.94.3_amd64.deb) ...
Unpacking replacement devscripts ...
Preparing to replace libncurses5-dev 5.3.20030719-2.amd64 (using .../libncurses5-dev_5.3.20030719-2.amd64_i386.deb) ...
Unpacking replacement libncurses5-dev ...
Preparing to replace lib64ncurses5-dev 5.3.20030719-2.amd64 (using .../lib64ncurses5-dev_5.3.20030719-2.amd64_i386.deb) ...
Unpacking replacement lib64ncurses5-dev ...
Setting up gcc-3.3-base (3.3.2-0pre4.biarch1) ...
Setting up libpam-runtime (0.76-14) ...
Setting up sysv-rc (2.85-7) ...
dpkg: dependency problems prevent configuration of console-tools:
console-tools depends on console-common; however:
Package console-common is not installed.
dpkg: error processing console-tools (--install):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of base-config:
base-config depends on console-tools; however:
Package console-tools is not configured yet.
dpkg: error processing base-config (--install):
dependency problems - leaving unconfigured
Setting up ncurses-base (5.3.20030719-2.amd64) ...
Setting up perl-modules (5.8.0-21.lib64) ...
Setting up libc6 (2.3.2-7.biarch1) ...
Current default timezone: 'UTC'.
Local time is now: Thu Feb 5 20:22:53 UTC 2004.
Universal Time is now: Thu Feb 5 20:22:53 UTC 2004.
Run 'tzconfig' if you wish to change it.
Setting up lib64c6 (2.3.2-7.biarch1) ...
Setting up base-passwd (3.5.4) ...
Setting up makedev (2.3.1-64) ...
Setting up iputils-ping (20020927-1) ...
Setting up netkit-inetd (0.10-9) ...
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend is incompatible with emacs shell buffers)
debconf: falling back to frontend: Readline
Starting internet superserver: inetd.
Setting up klogd (1.4.1-13) ...
Stopping kernel log daemon: klogd.
Starting kernel log daemon: klogd.
Setting up sysklogd (1.4.1-13) ...
Stopping system log daemon: syslogd.
Starting system log daemon: syslogd.
Setting up slang1a-utf8 (1.4.9-2.lib64) ...
Setting up libnewt0.51 (0.51.4-18) ...
Setting up libpopt0 (1.7-3) ...
Setting up whiptail (0.51.4-18) ...
Setting up perl-base (5.8.0-18) ...
Setting up liblocale-gettext-perl (1.01-17) ...
Setting up libtext-iconv-perl (1.2-2) ...
Setting up libtext-charwidth-perl (0.04-1) ...
Setting up libtext-wrapi18n-perl (0.06-1) ...
Setting up debconf-i18n (1.3.22) ...
Setting up debconf (1.3.22) ...
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend is incompatible with emacs shell buffers)
debconf: falling back to frontend: Readline
Configuring debconf
-------------------
Packages that use debconf for configuration share a common look and feel. You
can select the type of user interface they use.
The dialog frontend is a full-screen, character based interface, while the
readline frontend uses a more traditional plain text interface, and the gnome
frontend is a modern X interface. The editor frontend lets you configure things
using your favorite text editor. The noninteractive frontend never asks you any
questions.
1. Dialog 2. Readline 3. Gnome 4. Editor 5. Noninteractive
:-) What interface should be used for configuring packages? 2
Debconf prioritizes the questions it asks you. Pick the lowest priority of
question you want to see:
- 'critical' only prompts you if the system might break.
Pick it if you are a newbie, or in a hurry.
- 'high' is for rather important questions
- 'medium' is for normal questions
- 'low' is for control freaks who want to see everything
Note that no matter what level you pick here, you will be able to see every
question if you reconfigure a package with dpkg-reconfigure.
1. critical 2. high 3. medium 4. low
:-) See only questions that are of what priority and higher? 3
Setting up libpam0g (0.76-14) ...
Setting up libcap1 (1.10-12) ...
Setting up libdb3 (3.2.9-19) ...
Setting up libpam-modules (0.76-14) ...
Setting up login (4.0.3-12) ...
Setting up passwd (4.0.3-12) ...
Setting up adduser (3.51) ...
Adduser
-------
Normally, home directories can be viewed by all users on the system. If you want
to increase the security/privacy on your system, you might want your home
directories only readable by the user. If you are unsure, answer yes to enable
system wide readable home directories.
This will only affect home directories of users added with the adduser program
later.
:-) Do you want system wide readable home directories? yes
Setting up console-data (2002.12.04dbs-25) ...
Configuring console-data
------------------------
The keymap describes how keys are laid out on your keyboard, and what symbols
(letters, digits, etc.) are drawn on them.
"Select keymap from arch list" will allow you to select one of the predefined
keymaps specific for your architecture - you will most likely want this unless
you have a USB keyboard.
"Don't touch keymap" will prevent the configuration system from overwriting the
keymap you have in /etc/console. Select this if you want to keep a keymap you
obtained through other means. Please remember to install new keymaps with
install-keymap(8) if you select this choice.
"Keep kernel keymap" will prevent any keymap from being loaded next time your
system boots. It will remove from /etc/console any keymap you may have already
selected (it will be lost), but if you have already loaded a keymap, it cannot
not be changed back until you reboot.
"Select keymap from full list" offers a full listing of all predefined keymaps.
You want this, if you use an USB keyboard from a different computer architecture
or if you use an adapter to use such a keyboard.
1. Select keymap from arch list 3. Keep kernel keymap
2. Don't touch keymap 4. Select keymap from full list
:-! What policy do you want to apply regarding keymaps ? 3
Looking for keymap to install:
/var/lib/dpkg/info/console-data.postinst: line 13: /usr/share/console/getkmapchoice.pl: No such file or directory
Setting up lib64console (0.2.3dbs-43lib64) ...
Setting up lib64ncurses5 (5.3.20030719-2.amd64) ...
Setting up mount (2.12-3) ...
Setting up libncurses5 (5.3.20030719-2.amd64) ...
Setting up zlib1g (1.1.4-15lib64.1) ...
Setting up util-linux (2.12-3) ...
Setting up e2fslibs (1.34+1.35-WIP-2003.08.21-3) ...
Setting up libblkid1 (1.34+1.35-WIP-2003.08.21-3) ...
Setting up libcomerr2 (1.34+1.35-WIP-2003.08.21-3) ...
Setting up libss2 (1.34+1.35-WIP-2003.08.21-3) ...
Setting up libuuid1 (1.34+1.35-WIP-2003.08.21-3) ...
Setting up e2fsprogs (1.34+1.35-WIP-2003.08.21-3) ...
Setting up coreutils (5.0-5) ...
Setting up debianutils (2.5.5) ...
Setting up libconsole (0.2.3dbs-43lib64) ...
Setting up bsdutils (2.12-3) ...
Setting up tar (1.13.25-6) ...
Setting up ncurses-bin (5.3.20030719-2.amd64) ...
Setting up findutils (4.1.20-3) ...
Setting up mawk (1.3.3-11) ...
Setting up base-files (3.0.12) ...
Setting up bash (2.05b-9.1) ...
Setting up hostname (2.10) ...
Setting up diff (2.8.1-6) ...
Setting up sed (4.0.7-1) ...
Setting up gzip (1.3.5-7) ...
Setting up grep (2.5.1-6) ...
Setting up cpio (2.5-1.1) ...
Setting up libgcc1 (3.3.2-0pre4.biarch1) ...
Setting up libstdc++5 (3.3.2-0pre4.biarch1) ...
Setting up binutils (2.14.90.0.6-5) ...
Setting up cpp-3.3 (3.3.2-0pre4.biarch1) ...
Setting up cpp (3.3.1--6) ...
Setting up libdb4.0 (4.0.14-1.2lib641) ...
Setting up libgdbm3 (1.8.3-2) ...
Setting up perl (5.8.0-18) ...
Setting up patch (2.5.9-1) ...
Setting up make (3.80-4) ...
Setting up dpkg-dev (1.10.18-subarch2.1) ...
Setting up gcc-3.3 (3.3.2-0pre4.biarch1) ...
Setting up libc6-dev (2.3.2-7.biarch1) ...
Setting up g++-3.3 (3.3.2-0pre4.biarch1) ...
Setting up gcc (3.3.1-3) ...
Setting up lib64c6-dev (2.3.2-7.biarch1) ...
Setting up devscripts (2.7.94.3) ...
Setting up libncurses5-dev (5.3.20030719-2.amd64) ...
Setting up lib64ncurses5-dev (5.3.20030719-2.amd64) ...
Setting up libdb1-compat (2.1.3-7) ...
Setting up lib64gcc1 (3.3.2-0pre4.biarch1) ...
Setting up lib64stdc++5 (3.3.2-0pre4.biarch1) ...
Setting up apt (0.5.14-subarch1) ...
Setting up dselect (1.10.18-subarch2.1) ...
Setting up dpkg (1.10.18-subarch2.1) ...
Setting up initscripts (2.85-7) ...
Setting up sysvinit (2.85-7) ...
init: timeout opening/writing control channel /dev/initctl
Setting up modutils (2.4.25-0.biarch1) ...
head: `-1' option is obsolete; use `-n 1'
Try `head --help' for more information.
WARNING: you already have an /etc/modules.conf file which has not
been generated by update-modules. Debian now uses a new system which
uses multiple files in the /etc/modutils directory. See the manpage
for update-modules for more information on this setup.
Please check all changes you made in /etc/modules.conf and either
apply them to the provided files in /etc/modutils or add your own
files there. Then run update-modules.
Press [ENTER] to continue
Setting up modconf (0.2.44) ...
Setting up libstdc++5-3.3-dev (3.3.2-0pre4.biarch1) ...
Errors were encountered while processing:
/var/cache/apt/archives/console-common_0.7.33_all.deb
console-tools
base-config
opteron:/# dpkg -i /var/cache/apt/archives/console-common_0.7.33_all.deb
(Reading database ... 9679 files and directories currently installed.)
Unpacking console-common (from .../console-common_0.7.33_all.deb) ...
Setting up console-common (0.7.33) ...
Looking for keymap to install:
KERNEL
opteron:/# dpkg --configure -a
Setting up console-tools (0.2.3dbs-43lib64) ...
Setting up base-config (1.75) ...
opteron:/#
----------------------------------------------------------------------
Nothing broken there. Nothing there to stop you. I will check the
cdebootstrap error in detail but thats nothing that realy stops you.
> > but if you start changing woody or
> > sarge to sid from the instructions you are inviting trouble.
>
> Except that frequently sid is more "stable" than sarge when it comes
> to bleeding edge hardware. I've been a debian user for 9 years now,
> and I'm used to trusting sid more than stable for this sort of thing.
The layout (as I intended the Packages file to be) is
sarge - stable | works with sarge i386 together
??? - testing | tested versions similar to i386 testing
sid - unstable | same versions as sid autobuild (more an experimental)
So the FAQ actually suggests installing "stable". Its just not called
that way since its not woody. "stable" currently meaning an
installation has been tested with that and the resulting chroot
can compile a new kernel and a few other tests.
It seems someone changed the sarge packages files or some debs
(possibly me) and broke things slightly. But I don't see the problems
you mentioned.
> Anyway, the FAQ says:
>
> you need to setup a debian woody i386 [...] see the Debian Reference
> Manual 8.6.33 or the (c)debootstrap documentation [...] add "deb
> http://debian-amd64.alioth.debian.org/ sarge main" to your
> /etc/apt/sources.list'
>
> If you think that's a clear instruction not to use debootstrap or to
At that stage debootstrap is fine. It can handle i386.
> avoid sarge, I'd hate to hear what you think is unclear and confusing.
It says "debian woody i386".
> It reads like an old document that's been carelessly updated.
Anyway, thats from
"The first 64-bit kernel"
"Installing the biarch toolchain on a i386 chroot"
from the mail I thought you already have such a kernel. If not its
way easier to create a .config and ask on irc or on the ML to get it
compiled by someone else (as suggested in the FAQ as fallback). I
started with a 64bit kernel preinstalled so i never had to do that
part. The docs are from old texts and hear say of other people.
Personally I'm to lazy to switch back to a 32bit kernel to check and
update those informations, I think a working kernel image is more
usefull to get people started. Help is welcome there none the less.
The part of the FAQ you want to read again is:
"Creating a 32/64 bit chroot environment (optional)"
MfG
Goswin
Reply to: