[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Old Debian and Starting A Service



Yeah, I got it to boot up, but I couldn't get into it, and I got no guidance on upgrading it, so it was a non-starter.
Anyway, I got Debian 11.7 installed, I just have to set up the WIFI again.
Last time I did this, it was on the same i386 machine, but on a 32 gb SD card in the card slot. I wanted to put a good working image on the internal 4 GB SSD and then make an image of it, so I can restore it if I need to.

Glenn
----- Original Message ----- From: "D.J.J. Ring, Jr." <n1ea@arrl.net>
To: "K0LNY" <glenn@ervin.email>
Cc: <debian-accessibility@lists.debian.org>
Sent: Saturday, June 3, 2023 8:53 PM
Subject: Re: Old Debian and Starting A Service


Vinux 2.1 CLI Max is based on Lenny Debian 5.0.10, it's a x686 32bit
system.  Works fine here.

Vinux 3 and later are all based on Ubuntu and are (sadly) Graphic User
Interface.  They have the Command Line Interface of course, but they
have a GUI already installed.

BRGDS,
David

On Sat, Jun 3, 2023 at 7:10 PM K0LNY <glenn@ervin.email> wrote:

Well I can't get the image to boot a second time.
I may need to find a newer Vinux.
I read the screen while it was trying to boot, with my iPhone, and this Vinux CLI only, is Debian 1.10.22.
Glenn

----- Original Message -----
From: K0LNY
To: debian-accessibility@lists.debian.org
Sent: Saturday, June 3, 2023 4:05 PM
Subject: Old Debian and Starting A Service

Hi,
I thought I'd give this old Vinux 2.1 CLI a go on the Asus 701, to see if I can upgrade it little by little.
I have been looking for older Debian commands to start SSH.
I tried to apt-get install SSH, and it said it is already running the latest, which is the latest for it's package, which I don't know is Debian 2.1, because it's Vinux 2.1.
But it does not know systemd or systemctl.
So I don't know how to get the service running.
It seems to have no WIFI, but I tried to find its IP address with
hostname -I
and it was before the capitol I was used, so I found the IP with a small I.
But the connection is still refused.
I tried to update, and it said it is updated already.
I also don't know the upgrade command for older Debian.
So if anyone remembers, thanks for any info.
Glenn


Reply to: