[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: "BUG: soft lockup" on A1200; was: Re: Updated installation images for Debian Ports 2019-04-20



Szymon,

On 19/06/19 7:50 AM, Szymon Bieganski wrote:
Hello Geert,

On 6/18/19 8:56 AM, Geert Uytterhoeven wrote:
Can you sprinkle some debug prints
     printk("%s:%u\n", __func__, __LINE__);

in ide_probe_port() and probe_for_drive() (drivers/ide/ide-probe.c) and retry?

I've recompiled with addition of these extra lines, and found out that
the re-enable of irq = 2 hangs (see attached log for details)

===================
printk("%s:%u\n", __func__, __LINE__);
         /*
          * Use cached IRQ number. It might be (and is...) changed by probe
          * code above
          */
printk("irqd = %u\n", irqd);    // printed last


Does the heartbeat LED keep flashing past this point? I wonder whether there's an interrupt still pending on the IDE interface that wasn't cleared when the probe for hdb timed out.

Can you add more output to check where ide_dev_read_id() exits in this case? And maybe add

(void)tp_ops->read_status(hwif);

before the return instruction taken?

Cheers,

    Michael


         if (irqd) {
                 enable_irq(irqd);
printk("enabled IRQ %u\n", irqd);
         }
printk("%s:%u\n", __func__, __LINE__);
         return rc;

====================


The interrupts present on my machine are:

(initramfs) cd
/proc
(initramfs) cat interrupts
            CPU0
   2:          5      auto      CIAA, apne
   6:       5973      auto      CIAB
   8:        580     amiga      serial TX
   9:          0     amiga      floppy_dma
  12:       2110     amiga      fb vertb handler
  13:       1925     amiga      serial status
  19:         44     amiga      serial RX
  23:          4       cia      floppy_timer
  25:          0       cia      amikbd
  27:       5973       cia      timer
ERR:          0

I hope I provided enough information this time.

With kind regards,

Szymon



Reply to: