Re: "BUG: soft lockup" on A1200; was: Re: Updated installation images for Debian Ports 2019-04-20
On Wed, 12 Jun 2019, Szymon Bieganski wrote:
>
> Here is the end of dmesg (full log in attachment) when kernel stalls,
> just as before:
>
> ------------------------
>
> [ 122.430000] This architecture does not have kernel memory protection.
> [ 122.440000] Run /init as init process
> [ 126.690000] calling ide_init+0x0/0x7c [ide_core] @ 43
> [ 126.700000] Uniform Multi-Platform E-IDE driver
> [ 126.710000] initcall ide_init+0x0/0x7c [ide_core] returned 0 after
> 7988 usecs
> [ 126.980000] calling amiga_gayle_ide_driver_init+0x0/0x1c [gayle] @ 43
> [ 126.990000] ide: Gayle IDE controller (A1200 style)
> [ 127.000000] Probing IDE interface ide0...
> [ 127.390000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
> [ 127.540000] hda: SAMSUNG MP0402H, ATA DISK drive
> [ 127.610000] Z2RAM: using 0K Zorro II RAM and 512K Chip RAM (Total 512K)
> [ 127.980000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
> [ 128.200000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
> [ 148.570000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s!
> [systemd-udevd:43]
> [ 148.570000] Modules linked in: gayle(+) ide_core
> [ 148.570000] Format 00 Vector: 0078 PC: 00050b58 Status: 2200
> Not tainted
> [ 148.570000] ORIG_D0: ffffffff D0: 00000064 A2: 0151ef90 A1: 80bfe001
> [ 148.570000] A0: 003f0c12 D5: 00000000 D4: 0000000a
> [ 148.570000] D3: 00400140 D2: 00000001 D1: 8e6f286a
> [ 759.250000] amikbd: Ctrl-Amiga-Amiga reset warning!!
> [ 759.260000] amikbd: Ctrl-Amiga-Amiga reset warning!!
> ------------------------
>
> If you see a difference in detection of IDE devices, it's due to fact
> that I disconnected all but the master hard disk.
>
If you are willing to build your own kernel, you could try a different
driver:
CONFIG_IDE=n
CONFIG_ATA=y
CONFIG_ATA_SFF=y
CONFIG_PATA_GAYLE=y
--
> With kind regards,
>
> Szymon
>
Reply to: