Re: Release Party Time ;-)
On 05/02/2011, at 8:12 AM, Thorsten Glaser wrote:
Hoi iedereen,
let's just have a release party of our own. I've just uploaded
-r--r--r-- 1 tg daemon - 36687832 Feb 4 20:02 base.cow-
m68k-20110204.txz
-r--r--r-- 1 tg daemon - 543 Feb 4 20:03 base.cow-
m68k-20110204.txz.sig
to people.d.o, linked (as usual) on the Debian Wiki:
https://wiki.debian.org/M68k/Cowbuilder
Featuring fixed binutils and a rebuilt eglibc.
Have fun!
Hi list.
Ok finally installed (took about 2 hours) on Quadra 650 and got to;
......
Mounting local file systems ... done
Activating swap ... done
Cleaning up tempory files ...
Cleaning up tempory files ...
INIT: Entering runlevel: 2
Usinging makefile-concurrent boot in runlevel 2
INIT: ld "1" respawning too fast: disabled for 5 minutes.
INIT: ld "2" respawning too fast: disabled for 5 minutes.
INIT: ld "3" respawning too fast: disabled for 5 minutes.
INIT: ld "4" respawning too fast: disabled for 5 minutes.
INIT: ld "5" respawning too fast: disabled for 5 minutes.
INIT: ld "6" respawning too fast: disabled for 5 minutes.
INIT: no more processes left on this level.
<hangs at this point, INIT errors repeat.>
System is Quadra 650 with 18gB 50 pin hd (installed on 1 GB ext2 /dev/
sda8 at ~15,000,000 sector)
138 mB memory
AAUI<->10bT network
14" Apple monitor
Standard ADB and mouse.
To install I downloaded http://people.debian.org/~tg/f/m68k/base.cow-m68k-20110204.txz
converted to .tgz on another computer, scp to Mac and tar -zxvf
(original mac 2.6.21 system on /dev/sda7 did not have xz)
then used "dpkg-deb -x" on all of in same directory (/dev/sda8 was on /
mnt, there was no kernel in /mnt/boot)
http://ftp.debian-ports.org/debian/pool-m68k/main/l/linux-2.6/firmware-linux-free_2.6.32-30+m68k.5_all.deb
./linux-headers-2.6.32-5+m68k.5-all_2.6.32-30+m68k.5_m68k.deb
./linux-headers-2.6.32-5+m68k.5-common_2.6.32-30+m68k.5_m68k.deb
./linux-headers-2.6.32-5+m68k.5-mac_2.6.32-30+m68k.5_m68k.deb
./linux-image-2.6.32-5+m68k.5-mac_2.6.32-30+m68k.5_m68k.deb
./linux-libc-dev_2.6.32-30+m68k.5_m68k.deb
./linux-support-2.6.32-5+m68k.5_2.6.32-30+m68k.5_all.deb
changed /etc/fstab, to include /, swap and /proc.
#name mount type opts dump pass
/dev/sda8 / ext2 errors=remount-ro 0 0
/dev/sda5 none swap sw 0 0
proc /proc proc defaults 0 0
copied /etc/network* on /dev/sda7 to sda8
Booted with penguin 0.19.
Any help? /var/log/dmesg stops before the above info, but is available
here http://mich431.net/mac-dmesg.gz there are no other readable logs.
--
Michael Tomkins
michft@gmail.com
+61 408 172 142
Reply to: